"services" {
"nickserv" {
"nick" "NickServ";
- // If you want to by have *@* as the default hostmask, set
- // default_hostmask. This is discouraged for security reasons.
+ // What user modes do you want this service to have? Please keep in
+ // mind which ircd software you are using here, and that all of the
+ // services need to be at least +o.
+ // "modes" "+iok";
+ // If you want to by have *@* as the default hostmask for all
+ // new accounts, set default_hostmask. This is discouraged
+ // for security reasons.
// "default_hostmask" "1";
// do we warn users when someone new auths to their account?
"warn_clone_auth" "1";
"default_maxlogins" "2";
// what is the absolute maxlogins value?
"hard_maxlogins" "10";
+ // Which mode should we use for account timestamps?
+ "account_timestamp_mode" "ignore";
// This names a file that contains easily guessed passwords.
// It always contains "password", "<password>" and the user's
// account name.
"lc_h" "800"; // specifically lower case h
"uc_H" "800"; // .. and upper case H
"S" "999";
- "b" "1";
+ "b" "800";
+ "I" "800";
};
// and for who can change epithets for staff
"set_epithet_level" "800";
"account_expire_delay" "35d";
// how long until an account with no access to any channels expires?
"nochan_account_expire_delay" "14d";
+ // how long must an account be inactive so it can be ounregistered without force?
+ "ounregister_inactive" "1M";
+ // which flags on an account require the ounregister to be used with force?
+ "ounregister_flags" "ShgsfnHbuI";
/* "require_qualified" has been removed. It is now
* integrated into the modcmd command authorization
* and dispatch mechanism. "/msg OpServ help modcmd"
"opserv" {
"nick" "OpServ";
+ // What user modes do you want this service to have? Please keep in
+ // mind which ircd software you are using here, and that all of the
+ // services need to be at least +o.
+ // "modes" "+iok";
// should use of this service be limited to global opers?
"privileged" "1";
// fullname for service
// who to tell about staff auths?
"staff_auth_channel" "#opserv";
"staff_auth_channel_modes" "+tinms";
+ // Force Opers to be in staff_auth_channel
+ // 0 = don't force opers to be in the channel
+ // 1 = force opers to be in the channel
+ // 2 = force opers to be in the channel but kick them if they get mode -o set (deoper)
+ "staff_auth_force_opers" "2";
// how many clones to allow from an untrusted host?
"untrusted_max" "4";
// how long of a g-line should be issued if the max hosts is exceeded?
"size" "200";
"drain-rate" "3";
};
+
};
"chanserv" {
// (This is changed relative srvx-1.0.x, which would use default
// unless you specified ".disabled".)
"nick" "ChanServ";
- // Should ChanServ join the channel? Please do not ask the srvx dev
- // team for help configuring your ircd or a patch if you attempt to
- // use this option on ircds that do not support having services off
- // of the channel. Most people will leave this off; we cannot assist
- // you in designing your network to make this option usefull to you.
- "off_channel" "no";
+ // What user modes do you want this service to have? Please keep in
+ // mind which ircd software you are using here, and that all of the
+ // services need to be at least +o.
+ // "modes" "+iok";
+ // Does your ircd have off-channel services support? Does it have
+ // a registered channel mode? Does it support services opping themselves?
+ // Bahamut has these things; ircu2.10.11 does not.
+ // This setting takes three numerical values:
+ // 0 = off
+ // 1 = use a registered channel mode, have services op themselves
+ // 2 = all of the above, and a channel setting to have ChanServ not
+ // idle in the channel
+ "off_channel" "0";
// how long should a person be unseen before resending infoline?
"info_delay" "120";
// maximum greeting length
- "max_greetlen" "120";
+ "max_greetlen" "200";
// maximum users in a channel userlist
"max_chan_users" "512";
// maximum bans on a channel banlist
"chan_expire_freq" "3d";
// How long is a channel unvisited (by masters or above) before it can be expired?
"chan_expire_delay" "30d";
+ // How often to look for dnrs that have expired?
+ "dnr_expire_freq" "1h";
// what !set options should we show when user calls "!set" with no arguments?
- "set_shows" ("DefaultTopic", "TopicMask", "Greeting", "UserGreeting", "Modes", "PubCmd", "InviteMe", "UserInfo", "GiveVoice", "GiveOps", "EnfOps", "EnfModes", "EnfTopic", "TopicSnarf", "Setters", "CtcpUser", "CtcpReaction", "Protect", "Toys", "DynLimit", "NoDelete");
+ "set_shows" ("DefaultTopic", "TopicMask", "Greeting", "UserGreeting", "Modes", "PubCmd", "InviteMe", "StrictOp", "AutoOp", "EnfModes", "EnfTopic", "TopicSnarf", "UserInfo", "GiveVoice", "GiveOps", "EnfOps", "Setters", "CtcpUser", "CtcpReaction", "Protect", "Toys", "DynLimit", "NoDelete");
// A list of !8ball responses
"8ball" ("Not a chance.",
"max_owned" "5";
// how long between automatic topic refreshes with TopicRefresh 0
"refresh_period" "3h";
+ // how long between two invites of an user
+ "invite_timeout" "10s";
// what should !access say for various staff?
"irc_operator_epithet" "a megalomaniacal power hungry tyrant";
"network_helper_epithet" "a wannabe tyrant";
"default_modes" "+nt";
// minimum opserv access to set, clear or override nodelete setting?
"nodelete_level" "1";
+ // how long before a new channel owner can give ownership away?
+ "giveownership_timeout" "1w";
+ // message sent to new channels
+ "new_channel_unauthed_join" ""; //only sent if the user is unauthed
+ "new_channel_authed_join" ""; //only sent if the user is authed
+ "new_channel_message" ""; //always after the message above
+
};
"global" {
"nick" "Global";
+ // What user modes do you want this service to have? Please keep in
+ // mind which ircd software you are using here, and that all of the
+ // services need to be at least +o.
+ // "modes" "+iok";
// should users get community announcements by default or not?
"announcements_default" "on";
};
+
+ "spamserv" {
+ // You may disable a service by removing its "nick" config item.
+ // That means: SERVICES WILL ONLY WORK IF YOU DEFINE THEIR NICK.
+ // (This is changed relative srvx-1.0.x, which would use default
+ // unless you specified ".disabled".)
+ "nick" "SpamServ";
+ "debug_channel" "#spamserv";
+ // url of the network rules. if you don't have network rules, remove this key.
+ "network_rules" "http://www.gamesurge.net/aup";
+ // trigger for spamserv; remove this key to disable the trigger
+ "trigger" "-";
+ // ban duration of a short timedban.
+ "short_ban_duration" "15m";
+ // ban duration of a long timedban.
+ "long_ban_duration" "1h";
+ // duration of a gline. SpamServ will issue it after several violations and a kill.
+ "gline_duration" "1h";
+ // users may add "exception_max" exceptions to the list. IRCOps can override "exception_max".
+ "exception_max" "10";
+ // minimum & maximum length of an exception.
+ "exception_min_len" "4";
+ "exception_max_len" "12";
+ // if someone advertises a channel, which doesn't exist (channel is empty, no users),
+ // SpamServ doesn't punish the user.
+ // enable this setting, if SpamServ has to ignore advertisements of channels, which do not exist.
+ // disable this setting, if SpamServ has to punish the users whenever they advertise.
+ "adv_chan_must_exist" "0";
+ // remove all mirc codes from messages before checking for advertisements.
+ // if this setting is disabled and someone spams a url which
+ // contains a bold char, SpamServ doesn't punish him.
+ "strip_mirc_codes" "1";
+ // enable this, if SpamServ has to "follow" ChanServ, when a channel moves or merges.
+ // disable it, if it shouldn't be possible to move or merge SpamServ with /msg chanserv move|merge.
+ "allow_move_merge" "1";
+ };
};
// The modules section gives configuration information to optional modules.
"max_read" "1024"; // don't read more than 1024 bytes from any client
"gline_duration" "1h"; // issue G-lines lasting one hour
"max_cache_age" "60"; // only cache results for 60 seconds
- // "address" "192.168.0.10"; // do proxy tests from this address
+ // "bind_address" "192.168.0.10"; // do proxy tests from this address
};
"snoop" {
// Where to send snoop messages?
"message_expiry" "30d"; // age when messages are deleted; set
// to 0 to disable message expiration
};
+ "qserver" {
+ "bind_address" "127.0.0.1";
+ "port" "7702";
+ "password" "hello";
+ };
+ "blacklist" {
+ // File containing blacklisted client addresses.
+ // "file" "blacklist.txt";
+ // Each line in the file should start with an IP or hostname.
+ // If there is whitespace and a message after that, the
+ // message will override this one:
+ "file_reason" "client is blacklisted";
+ // How long should a blacklist G-line last?
+ "gline_duration" "1h";
+ // Bot used to send debug notices
+ "debug_bot" "OpServ";
+ // To which channel should debug output be sent?
+ "debug_channel" "#opserv";
+ "debug_channel_modes" "+tinms";
+ // If you want to use DNS blacklists, add them here:
+ "dnsbl" {
+ // This DNSBL zone does not exist - you'll have to pick your own.
+ "dnsbl.example.org" {
+ // Send a notice instead of glining blacklisted ips
+ "debug" "1";
+ "description" "Example DNSBL entry";
+ "reason" "busted by a dns blacklist";
+ "duration" "1h";
+ // You can stick the client's IP in the G-line message.
+ "reason_2" "Example DNSBL reported %ip%'s address as 127.0.0.2";
+ // .. or the contents of a DNS TXT.
+ "reason_3" "%txt%";
+ };
+ };
+ };
+ "sar" {
+ // You generally will not want to override these defaults.
+ // "resolv_conf" "/etc/resolv.conf";
+ // "services" "/etc/services";
+ // "bind_address" "0.0.0.0";
+ // "bind_port" "0";
+ // The defaults for these are derived from the system config files (above).
+ // "domain" "example.org";
+ // "timeout" "3"; // base timeout for a DNS reply
+ // "retries" "3"; // number of times to retry on different servers or longer timeouts
+ // "ndots" "1"; // number of dots needed in a hostname to bypass search path
+ // "edns0" "0"; // if set, enable EDNS0 extended message sizes
+ // "search" ("example.org", "example.net");
+ // "nameservers" ("127.0.0.1");
+ };
};
"policers" {
"body_prefix" ("This goes before the mail text.", "Each string here is treated as a separate \"paragraph\" for line wrapping.");
"body_suffix_first" ("We care a lot about spam. If you did not request this email, bitch and moan loudly at our opers, and tell our ISP to gank our connection.");
"body_suffix" ("PLEASE DO NOT BE ALARMED. CALMLY BOARD THE AIRCRAFT, STRAP YOUR ARMS ACROSS YOUR BODY, AND JUMP THE HELL OUT OF THE PLANE.", "Yaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaatta!");
+ // If you are using the smtp mail back-end, you may need to set these:
+ "smtp_server" "localhost";
+ "smtp_service" "smtp";
+ // "smtp_myname" "localhost.domain";
};
// New section in srvx-1.2 to control database locations, etc.
"NickServ" { "mondo_section" "NickServ"; };
"OpServ" { "mondo_section" "OpServ"; };
"sendmail" { "mondo_section" "sendmail"; };
+ "SpamServ" { "mondo_section" "SpamServ"; };
// These are the options if you want a database to be in its own file.
"mondo" {