3 # By Carlo Wood (carlo@runaway.xs4all.nl)
5 # For a description of the syntax of this configuration file,
6 # see the config/Configure script.
8 # TO CONFIGURE THE SERVER, TYPE: 'make config' in the top level directory !
11 #### Start of system configuration section. ####
14 exec_prefix=@exec_prefix@
18 CFLAGS_DEFAULT="@CFLAGS@"
19 CPPFLAGS_DEFAULT="@CPPFLAGS@"
20 LDFLAGS_DEFAULT="@LDFLAGS@"
22 ac_cv_header_poll_h=@ac_cv_header_poll_h@
23 unet_cv_func_poll_syscall=@unet_cv_func_poll_syscall@
24 ac_cv_header_syslog_h=@ac_cv_header_syslog_h@
26 #### End of system configuration section. ####
28 if [ -z "$CONFIG_BATCH" ]; then
29 echo "**************************************************************************"
30 echo "Error: Please run 'make config' that resides in the top level directory!"
31 echo "**************************************************************************"
35 mainmenu_name "Undernet IRC Daemon Configuration"
36 mainmenu_option next_comment
37 if [ "$CONFIG_BATCH" = "n" ]; then
38 echo "* Welcome to the Undernet IRC Daemon Configuration script."
39 echo "* You can restart this configuration at any time by typing 'make config'."
40 echo "* If you need help with your decision on any question, type a '?'"
47 if [ "$DEFAULTS" != "none" ]; then
48 bool 'Do you want to change your previous configuration' CHANGE_CONFIG
49 if [ "$CHANGE_CONFIG" = "n" ]; then
50 echo "Ok, I will only prompt you for NEW parameters."
60 mainmenu_option next_comment
61 comment 'Debugging (do not define this on production servers)'
62 bool 'Do you want to enable debugging output' DEBUGMODE
63 bool 'Do you want to enable asserts and memory allocation checking' CONFIG_NDEBUG
65 if [ "$CONFIG_NDEBUG" = "n" ]; then
66 if [ -z "$EXTRA_CPPFLAGS" ]; then
67 EXTRA_CPPFLAGS="-DNDEBUG"
69 EXTRA_CPPFLAGS="-DNDEBUG $EXTRA_CPPFLAGS"
72 bool 'Are you testing on a host without DNS' NODNS
75 mainmenu_option next_comment
76 comment 'Compile stuff'
77 if [ "$prefix" = "NONE" ]; then
80 if [ "$exec_prefix" = "NONE" ]; then
81 eval exec_prefix="$prefix"
83 string 'Which compiler do you want to use' CC "$CC_DEFAULT"
84 echo "* For the following four questions, specify 'none' when you want it to be empty."
85 if [ -z "$cflags_O3_remark" -a -n "$CFLAGS" ]; then
86 CFLAGS_DEFAULT=`echo "$CFLAGS" | sed -e 's%-O2%-O3%'`
87 if [ "$CFLAGS_DEFAULT" != "$CFLAGS" ]; then
88 echo "You are highly advised to use -O3 instead of -O2 if you're short in cpu cycles!"
89 echo "Please read documentation (press '?'):"
93 eval string "'What flags should I pass to $CC [none]'" CFLAGS "'$CFLAGS_DEFAULT'"
94 define_macro cflags_O3_remark done
95 string 'Do you need extra include directories [none]' EXTRA_INCLUDEDIRS none
96 if [ -z "$LDFLAGS_DEFAULT" ]; then
99 eval LDFLAGS_DEFAULT="$LDFLAGS_DEFAULT"
101 string 'Which linker flags do you need [none]' LDFLAGS "$LDFLAGS_DEFAULT"
102 if [ -z "$LIBS" ]; then
105 string 'Which extra libraries do you need [none]' IRCDLIBS "$LIBS"
106 eval bindir="$bindir"
107 string 'In which directory should I install the ircd binary' BINDIR $bindir
108 if [ ! -d "$BINDIR" ]; then
109 echo "$BINDIR : No such directory"
111 string 'What should the name of the installed symbolic link to the exectuable be' SYMLINK ircd
112 string 'Which permissions do you want the binary to have' IRCDMODE 711
113 string 'Which owner do you want the binary to have' IRCDOWN "`id | sed -e 's/.*uid=[0-9]*(//' -e 's/).*//' 2> /dev/null`"
114 string 'Which group do you want the binary to have' IRCDGRP "`id | sed -e 's/.*gid=[0-9]*(//' -e 's/).*//' 2> /dev/null`"
116 string 'Where should I install the man page' MANDIR $mandir
117 if [ "$CFLAGS" = "none" ]; then
120 if [ "$EXTRA_INCLUDEDIRS" = "none" ]; then
123 if [ "$LDFLAGS" = "none" ]; then
126 if [ "$IRCDLIBS" = "none" ]; then
129 if [ -n "$EXTRA_INCLUDEDIRS" ]; then
130 for i in $EXTRA_INCLUDEDIRS; do
131 if [ -z "$EXTRA_CPPFLAGS" ]; then
134 EXTRA_CPPFLAGS="$EXTRA_CPPFLAGS -I$i"
138 if [ -z "$EXTRA_CPPFLAGS" ]; then
139 CPPFLAGS="-I../include -I../config"
141 CPPFLAGS="-I../include -I../config $EXTRA_CPPFLAGS"
143 echo "EXTRA_CPPFLAGS=\"$EXTRA_CPPFLAGS\"" >>$CONFIG
144 echo "CPPFLAGS=\"$CPPFLAGS\"" >>$CONFIG
145 bool 'Use inlining for a few crucial functions' FORCEINLINE y
148 if [ "$ac_cv_header_poll_h" = "yes" ]; then
149 if [ "$unet_cv_func_poll_syscall" = "yes" ]; then
150 define_bool USE_POLL y
152 mainmenu_option next_comment
153 comment 'Operating System specific defines.'
154 bool 'You have poll(), but do you want to use it' USE_POLL n
159 mainmenu_option next_comment
160 comment 'Host specific defines'
161 if [ -f /etc/resolv.conf ]; then
162 DOMAINNAME_DEFAULT="`awk '/^domain/ { print $2; exit }' /etc/resolv.conf`"
164 string 'What is the domain name of your network' DOMAINNAME $DOMAINNAME_DEFAULT
165 if [ -z "$DOMAINNAME" ]; then
168 string 'Please give a random seed of eight characters' RANDOM_SEED 12345678
169 bool 'Does your host have a reliable clock' RELIABLE_CLOCK
172 mainmenu_option next_comment
173 comment 'General defines'
174 bool 'Change root ('/') after start of daemon' CHROOTDIR
175 bool 'Do you want the daemon set its own uid/gid' CONFIG_SETUGID
176 if [ "$CONFIG_SETUGID" = "y" ]; then
177 int ' UID of irc daemon' IRC_UID
178 int ' GID of irc daemon' IRC_GID
180 define_int IRC_UID $IRC_UID
181 define_int IRC_GID $IRC_GID
182 bool 'Allow to specify configuration file on command line' CMDLINE_CONFIG
183 if [ "$CMDLINE_CONFIG" = "y" ]; then
184 echo " SECURITY: Then don't install the daemon SUID or SGID !"
187 bool 'Do you need virtual hosting' VIRTUAL_HOST
189 bool 'Will you connect to more then one server at a time' HUB
190 if [ "$PREV_HUB" != "$HUB" ]; then
196 mainmenu_option next_comment
197 comment 'Paths and files'
198 eval DPATH_DEFAULT="${prefix}/lib/ircd"
199 string 'Directory where all ircd stuff resides' DPATH $DPATH_DEFAULT
200 define_string SPATH "$BINDIR/$SYMLINK"
201 echo "The following filenames are either full paths or files within DPATH"
202 string 'Server configuration file' CPATH 'ircd.conf'
203 string 'Server MOTD file' MPATH 'ircd.motd'
204 string 'Server remote MOTD file (3 lines max)' RPATH 'remote.motd'
205 if [ "$DEBUGMODE" = "y" ]; then
206 string 'Debug file if DEBUGMODE' LPATH '/tmp/ircd.log'
208 define_string LPATH "$LPATH"
210 string 'File for server pid' PPATH 'ircd.pid'
213 mainmenu_option next_comment
214 comment 'Logging (filenames are either full paths or files within DPATH)'
215 bool 'Do you want to log the use of /WHO x% (recommended)' CONFIG_LOG_WHOX y
216 if [ "$CONFIG_LOG_WHOX" = "y" ]; then
217 string ' Give the path and(or) filename of this log file' WPATH 'whox.log'
220 comment 'Bad Channel G-Lines allow operators to add channel masks to a list which prohibits local clients from being able joining channels which match the mask. Remote BadChan Glines allow Uworld to add or remove channels from the servers internal list of badchans'
222 bool 'Do you want to enable Bad Channel G-lines' BADCHAN y
223 if [ "$BADCHAN" = "y" ]; then
225 echo " WARNING DO _NOT_ USE LOCAL BADCHANNEL GLINES ON UNDERNET"
226 echo " Use of LOCAL BAD Channel G-Lines can be cause for REMOVAL"
227 bool 'Allow LOCAL BAD Channel G-lines' LOCAL_BADCHAN
230 bool 'Do you want to log G-lines to a separate file' CONFIG_LOG_GLINES
231 if [ "$CONFIG_LOG_GLINES" = "y" ]; then
232 string ' Give the path and(or) filename of this log file' GPATH 'gline.log'
234 bool 'Do you want to log connecting users to a separate file' CONFIG_LOG_USERS
235 if [ "$CONFIG_LOG_USERS" = "y" ]; then
236 string ' Give the path and(or) filename of this log file' FNAME_USERLOG $DPATH/users
238 bool 'Do you want to log Opers to a separate file' CONFIG_LOG_OPERS
239 if [ "$CONFIG_LOG_OPERS" = "y" ]; then
240 string ' Give the path and(or) filename of this log file' FNAME_OPERLOG $DPATH/opers
242 if [ "$ac_cv_header_syslog_h" = "yes" ]; then
243 bool 'Do you want to use syslog' USE_SYSLOG
247 if [ "$USE_SYSLOG" = "y" ]; then
248 bool ' Log all operator kills to syslog' SYSLOG_KILL
249 bool ' Log all remote squits for all servers to syslog' SYSLOG_SQUIT
250 bool ' Log remote connect messages for other all servs' SYSLOG_CONNECT
251 bool ' Log all users who successfully become an Oper' SYSLOG_OPER
252 bool ' Send userlog stuff to syslog' SYSLOG_USERS
253 if [ "$SYSLOG_KILL" = "n" -a "$SYSLOG_SQUIT" = "n" -a \
254 "$SYSLOG_CONNECT" = "n" -a "$SYSLOG_OPER" = "n" -a \
255 "$SYSLOG_USERS" = "n" ]; then
256 define_macro LOG_FACILITY $LOG_FACILITY
257 define_bool USE_SYSLOG n
259 choice ' Log facility' \
260 "daemon CONFIG_DAEMON \
262 local0-7 CONFIG_LOCAL" daemon
263 if [ "$CONFIG_DAEMON" = "y" ]; then
264 define_macro LOG_FACILITY LOG_DAEMON
266 if [ "$CONFIG_USER" = "y" ]; then
267 define_macro LOG_FACILITY LOG_USER
269 int ' Which local facility (0-7)' INT_LOCAL
270 define_macro LOG_FACILITY LOG_LOCAL$INT_LOCAL
273 echo " Using log facility $LOG_FACILITY"
276 define_bool SYSLOG_KILL $SYSLOG_KILL
277 define_bool SYSLOG_SQUIT $SYSLOG_SQUIT
278 define_bool SYSLOG_CONNECT $SYSLOG_CONNECT
279 define_bool SYSLOG_OPER $SYSLOG_OPER
280 define_bool SYSLOG_USERS $SYSLOG_USERS
281 define_macro LOG_FACILITY $LOG_FACILITY
285 mainmenu_option next_comment
286 comment 'Configuration'
287 bool 'Use crypted passwords for operators' CRYPT_OPER_PASSWORD y
288 DUMMY=`echo "$BUFFERPOOL" | sed -e 's/[0-9]//g'`
289 if [ "$DUMMY" != "" ]; then
292 if [ "$HUB" = "y" ]; then
293 int 'Max size of the total of of all sendqs (bytes)' BUFFERPOOL 27000000
295 int 'Max size of the total of of all sendqs (bytes)' BUFFERPOOL 9000000
297 int 'Max receive queue for clients (bytes)' CLIENT_FLOOD 1024
298 int 'Maximum number of network connections (23 - (FD_SETSIZE-4))' MAXCONNECTIONS 252
299 int 'Default port for connections to other servers' SERVER_PORT 4400
300 int 'Nickname history length' NICKNAMEHISTORYLENGTH 800
301 bool 'Allow Opers to see (dis)connects of local clients' ALLOW_SNO_CONNEXIT
302 if [ "$ALLOW_SNO_CONNEXIT" = "y" ]; then
303 bool 'Show IP address in client connection notices' SNO_CONNEXIT_IP
305 bool 'Do you want to use R: lines in your configuration file' R_LINES
306 if [ "$R_LINES" = "y" ]; then
307 bool 'Process R: lines every rehash' R_LINES_REHASH y
308 bool 'Process R: lines always' R_LINES_OFTEN
310 define_bool R_LINES_REHASH $R_LINES_REHASH
311 define_bool R_LINES_OFTEN $R_LINES_OFTEN
313 bool 'Do you want support for the old I:*:ONE:*:: construct (read help text!)' USEONE n
314 bool 'Send a short message instead of the MOTD to connecting clients' NODEFAULTMOTD y
315 bool 'Kill connecting clients when forward and reverse DNS mismatch' KILL_IPMISMATCH n
318 mainmenu_option next_comment
319 comment 'Oper commands'
320 bool 'Allow (local) Opers to see all local invisible users' SHOW_INVISIBLE_USERS y
321 if [ "$SHOW_INVISIBLE_USERS" = "y" ]; then
322 bool 'Allow Opers to see all invisible users' SHOW_ALL_INVISIBLE_USERS y
324 bool 'Allow global Opers (O:) to see inside secret channels' OPERS_SEE_IN_SECRET_CHANNELS y
325 if [ "$OPERS_SEE_IN_SECRET_CHANNELS" = "y" ]; then
326 bool 'Allow local Opers (o:) to see inside secret channels' LOCOP_SEE_IN_SECRET_CHANNELS n
328 bool 'Do not truncate obnoxiously long /who output for opers' UNLIMIT_OPER_QUERY
329 bool 'Allow Opers to use the KILL command' OPER_KILL y
330 bool 'Allow Opers to use the REHASH command' OPER_REHASH y
331 bool 'Allow Opers to use the RESTART command' OPER_RESTART y
332 bool 'Allow Opers to use the DIE command' OPER_DIE y
333 bool 'Allow Opers to add local G-lines' OPER_LGLINE y
334 bool 'Allow Opers to connect from a remote site' OPER_REMOTE y
335 bool 'Allow local opers to use the REHASH command' LOCOP_REHASH y
336 bool 'Allow local opers to use the RESTART command' LOCOP_RESTART
337 bool 'Allow local opers to use the DIE command' LOCOP_DIE
338 bool 'Allow local opers to add local G-lines' LOCOP_LGLINE y
339 bool 'Allow local/global opers to be on any number of channels' OPER_NO_CHAN_LIMIT y
340 bool 'Allow local/global opers to set modes on local channels' OPER_MODE_LCHAN y
341 bool 'Allow local/global opers to walk through local channels modes' OPER_WALK_THROUGH_LMODES n
342 bool 'Prevent local/global opers from being kicked or deoped on local channels' NO_OPER_DEOP_LCHAN n
346 mainmenu_option next_comment
347 comment 'Server characteristics'
348 bool 'Do you want to have a default LIST parameter' CONFIG_LIST y
349 if [ "$CONFIG_LIST" = "y" ]; then
350 string 'Give default LIST parameter' DEFAULT_LIST 'T<10'
351 define_string DEFAULT_LIST_PARAM "$DEFAULT_LIST"
353 define_string DEFAULT_LIST "$DEFAULT_LIST"
354 define_bool DEFAULT_LIST_PARAM n
356 bool 'K: line comments treated as a file by default' COMMENT_IS_FILE y
357 bool 'Only nullify idle-time on PRIVMSG' IDLE_FROM_MSG y
360 mainmenu_option next_comment
361 comment 'Mandatory defines (you should leave these untouched)'
362 int 'Max auto connects per class (1!)' MAXIMUM_LINKS 1
363 if [ "$OPER_KILL" = "y" ]; then
364 bool 'Only allow KILLs of local clients' LOCAL_KILL_ONLY
366 define_bool LOCAL_KILL_ONLY $LOCAL_KILL_ONLY
368 int 'KILL nick chase time limit (30)' KILLCHASETIMELIMIT 30
369 int 'Max number of channels per user (recommended: 5)' MAXCHANNELSPERUSER 10
370 int 'Max number of silence masks (15!)' MAXSILES 15
371 int 'Expected average banmask length (40!)' AVBANLEN 40
372 eval define_macro MAXSILELENGTH \'\($AVBANLEN * MAXSILES\)\'
373 echo '* These are default values, used for class 0:'
374 int 'Max server idle time (60)' TIMESEC 60
375 int 'Class 0 ping frequency (120)' PINGFREQUENCY 120
376 int 'Class 0 connect frequency (600)' CONNECTFREQUENCY 600
377 int 'Min time before a link is good (300)' HANGONGOODLINK 300
378 int 'Wait before reconnecting to good link (10!)' HANGONRETRYDELAY 10
379 int 'connect(2) timeout (90!)' CONNECTTIMEOUT 90
380 int 'Max send queue (40000)' DEFAULTMAXSENDQLENGTH 40000