1 2001-07-31 Kevin L. Mitchell <klmitch@mit.edu>
3 * ircd/s_serv.c (server_estab): remove unused variable split
5 * ircd/parse.c: add mr_error to the parse table
7 * ircd/m_error.c (mr_error): add mr_error() to handle ERRORs from
8 unregistered connections--if IsUserPort() is true, the ERROR is
9 ignored, otherwise, the message is saved
11 2001-07-28 Kevin L. Mitchell <klmitch@mit.edu>
13 * ircd/m_kill.c (ms_kill): another minor typo *sigh*
15 * ircd/s_user.c (send_supported): oops, minor typo...
17 * ircd/s_user.c: implement send_supported() to send two ISUPPORT
18 messages containing our feature buffers; make register_user() use
21 * ircd/s_misc.c (exit_client): make sure not to give away a remote
22 server in the ERROR message sent to the client; if the killer is a
23 server, we substitute our name in its place
25 * ircd/m_version.c (m_version): use send_supported() to send the
26 ISUPPORT values to the user
28 * ircd/m_nick.c: shave nick collision kills here a bit, too, for
29 the same reasons as for m_kill.c
31 * ircd/m_kill.c: shave kills a bit so that the results look
32 exactly the same no matter where you are; if we didn't do this, it
33 would be possible to map the network by looking at the differences
34 between kills originating under various circumstances
36 * include/supported.h: split the features into two, so as to not
37 bust the parameter count when sending the features list
39 * include/s_user.h: declare new send_supported() function to send
40 the ISUPPORT information
42 2001-07-27 Kevin L. Mitchell <klmitch@mit.edu>
44 * ircd/s_bsd.c: disable IP (*not* TCP) options to prevent
45 source-routed spoofing attacks; this is only available under
46 u2.10.11, so don't even bother, since no one but testers are using
49 2001-07-25 Kevin L. Mitchell <klmitch@mit.edu>
51 * include/ircd_policy.h: enable HEAD_IN_SAND_REMOTE by default
53 * ircd/s_err.c: put in a . for reporting link version on /trace,
54 to match what /version does
56 2001-07-21 Kevin L. Mitchell <klmitch@mit.edu>
58 * ircd/s_misc.c (exit_client): servers don't understand what the
59 numeric nick ERROR is supposed to mean, so they ignore error
60 messages, resulting in not knowing why we were rejected; use
61 sendcmdto_one for servers and sendrawto_one for clients
63 2001-07-17 Kevin L. Mitchell <klmitch@mit.edu>
65 * ircd/m_burst.c (ms_burst): in the case of a modeless channel and
66 a nick collide, a bare BURST may be propagated; adjust the
67 enforced parameter count to accept the bare BURST
69 2001-07-12 Kevin L. Mitchell <klmitch@mit.edu>
71 * ircd/s_bsd.c: mark a client as having been IP checked
73 * ircd/IPcheck.c (ip_registry_check_remote): remove unneeded
74 second call to SetIPChecked()
76 2001-07-11 Kevin L. Mitchell <klmitch@mit.edu>
78 * ircd/engine_poll.c: deal with POLLHUP properly (hopefully)
80 * ircd/engine_devpoll.c: deal with POLLHUP properly (hopefully)
82 2001-07-09 Kevin L. Mitchell <klmitch@mit.edu>
84 * ircd/os_bsd.c (os_get_rusage): move buf into the two ifdef'd
85 sections so that if neither is used, the declaration of buf will
86 not elicit an "unused variable" warning under NetBSD
88 * ircd/m_map.c: include string.h to declare strcpy (fix warnings
91 * ircd/m_away.c: include string.h to declare strcpy/strlen (fix
94 * ircd/ircd_log.c: include string.h to declare strcpy/strlen (fix
97 * ircd/client.c: include string.h to declare memset (fix warnings
100 * ircd/channel.c: remove unused functions next_overlapped_ban,
101 del_banid, and is_deopped (fix warnings under -O1)
103 * ircd/IPcheck.c: include string.h to declare memset/memcpy (fix
106 2001-06-29 Kevin L. Mitchell <klmitch@mit.edu>
108 * ircd/s_user.c (set_user_mode): clear the snomask if the user
109 isn't supposed to receive server notices anymore
111 * ircd/ircd_features.c: change CONFIG_OPERCMDS to default to FALSE
113 * configure.in: use AC_MSG_CHECKING/AC_MSG_RESULT when checking
114 installation prefix; default devpoll and kqueue to on (they get
115 turned off if the required headers aren't present)
117 * ircd/whocmds.c (do_who): use ircd_snprintf() instead of
118 sprintf_irc(); it's a bit hackish, but it'll do for now
120 * ircd/support.c: remove unused #include
122 * ircd/send.c: remove unused #include
124 * ircd/s_user.c: use ircd_snprintf() instead of sprintf_irc()
126 * ircd/s_serv.c: remove unused #include
128 * ircd/s_misc.c: use ircd_snprintf() and friends instead of
129 sprintf_irc() and friends
131 * ircd/s_err.c: moved atoi_tab[] from ircd/sprintf_irc.c to
132 ircd/s_err.c, which is the only other file to refer to it
134 * ircd/s_conf.c (conf_add_deny): use ircd_snprintf() instead of
137 * ircd/s_bsd.c (connect_server): use ircd_snprintf() instead of
140 * ircd/s_auth.c: use ircd_snprintf() instead of sprintf_irc()
142 * ircd/res.c: use ircd_snprintf() instead of sprintf_irc()
144 * ircd/m_version.c: use ircd_snprintf() instead of sprintf_irc()
146 * ircd/m_kill.c: use ircd_snprintf() instead of sprintf_irc()
148 * ircd/listener.c: use ircd_snprintf() instead of sprintf_irc()
150 * ircd/gline.c: use ircd_snprintf() instead of sprintf_irc()
152 * ircd/channel.c: don't include sprintf_irc.h; use ircd_snprintf()
153 instead of sprintf_irc()
155 * ircd/Makefile.in: remove sprintf_irc.c from sources list; run
158 * include/ircd_string.h: remove declaration of sprintf_irc() (what
159 was it doing here anyway?)
161 * include/sprintf_irc.h: removed unneeded source file
163 * ircd/sprintf_irc.c: removed unneeded source file
165 * ircd/s_debug.c (count_memory): remove some dead code
167 * ircd/s_auth.c: remove some dead code
169 * ircd/res.c (update_list): remove some dead code
171 * ircd/m_whowas.c: remove some dead code
173 * ircd/m_whois.c: remove some dead code
175 * ircd/m_who.c: remove some dead code
177 * ircd/m_wallusers.c: remove some dead code
179 * ircd/m_wallops.c: remove some dead code
181 * ircd/m_wallchops.c: remove some dead code
183 * ircd/m_version.c: remove some dead code
185 * ircd/m_userip.c: remove some dead code
187 * ircd/m_userhost.c: remove some dead code
189 * ircd/m_uping.c: remove some dead code
191 * ircd/m_trace.c: remove some dead code
193 * ircd/m_topic.c: remove some dead code
195 * ircd/m_tmpl.c: remove some dead code
197 * ircd/m_time.c: remove some dead code
199 * ircd/m_squit.c: remove some dead code
201 * ircd/m_silence.c: remove some dead code
203 * ircd/m_settime.c: remove some dead code
205 * ircd/m_set.c: remove some dead code
207 * ircd/m_server.c: remove some dead code
209 * ircd/m_rpong.c: remove some dead code
211 * ircd/m_rping.c: remove some dead code
213 * ircd/m_restart.c: remove some dead code
215 * ircd/m_reset.c: remove some dead code
217 * ircd/m_rehash.c: remove some dead code
219 * ircd/m_quit.c: remove some dead code
221 * ircd/m_proto.c: remove some dead code
223 * ircd/m_privs.c: remove some dead code
225 * ircd/m_privmsg.c: remove some dead code
227 * ircd/m_pong.c: remove some dead code
229 * ircd/m_ping.c: remove some dead code
231 * ircd/m_pass.c: remove some dead code
233 * ircd/m_part.c: remove some dead code
235 * ircd/m_opmode.c: remove some dead code
237 * ircd/m_oper.c: remove some dead code
239 * ircd/m_notice.c: remove some dead code
241 * ircd/m_nick.c: remove some dead code
243 * ircd/m_map.c: remove some dead code
245 * ircd/m_lusers.c: remove some dead code
247 * ircd/m_list.c: remove some dead code
249 * ircd/m_links.c: remove some dead code
251 * ircd/m_kill.c: remove some dead code
253 * ircd/m_kick.c: remove some dead code
255 * ircd/m_jupe.c: remove some dead code
257 * ircd/m_join.c: remove some dead code
259 * ircd/m_ison.c: remove some dead code
261 * ircd/m_invite.c: remove some dead code
263 * ircd/m_info.c: remove some dead code
265 * ircd/m_help.c: remove some dead code
267 * ircd/m_gline.c: remove some dead code
269 * ircd/m_get.c: remove some dead code
271 * ircd/m_error.c: remove some dead code
273 * ircd/m_endburst.c: remove some dead code
275 * ircd/m_die.c: remove some dead code
277 * ircd/m_desynch.c: remove some dead code
279 * ircd/m_destruct.c: remove some dead code
281 * ircd/m_defaults.c: remove some dead code
283 * ircd/m_create.c: remove some dead code, along with an #if 1
285 * ircd/m_cprivmsg.c: remove some dead code
287 * ircd/m_connect.c: remove some dead code
289 * ircd/m_close.c: remove some dead code
291 * ircd/m_clearmode.c: remove some dead code
293 * ircd/m_burst.c: remove some dead code
295 * ircd/m_away.c: remove some dead code
297 * ircd/m_admin.c: remove some dead code
299 * ircd/listener.c (accept_connection): remove some dead code
301 * ircd/ircd_reply.c (need_more_params): remove some dead code
303 * ircd/channel.c (add_banid): remove some dead code
305 * include/support.h: remove some dead code
307 * include/querycmds.h: remove some dead code
309 * doc/readme.chroot: document how to do chroot operation
311 2001-06-28 Kevin L. Mitchell <klmitch@mit.edu>
313 * ircd/Makefile.in: tune for VPATH builds/installs; add a rule to
314 force bin directory to be created if necessary prior to
315 installation; run make depend
317 * doc/Makefile.in (install): tune for VPATH installs by cd'ing to
320 * Makefile.in: tune to detect Makefile.in changes in
321 subdirectories and to create installation directory indicated by
324 * ircd/whocmds.c (count_users): routine to count the number of
325 users matching a given user@host mask
327 * ircd/s_err.c: add error messages for ERR_LONGMASK,
328 ERR_TOOMANYUSERS, and ERR_MASKTOOWIDE
330 * ircd/m_gline.c: look for and advance past '!' flag on G-lines
331 from operators; only set GLINE_OPERFORCE flag if oper has the
332 PRIV_WIDE_GLINE privilege
334 * ircd/ircd_features.c: add GLINEMAXUSERCOUNT, which is the
335 maximum number of users a G-line can impact before it has to be
336 forced; OPER_WIDE_GLINE, to allow operators to use ! to force a
337 wide G-line to be set; and LOCOP_WIDE_GLINE, to allow local
338 operators to use ! to force a wide G-line to be set
340 * ircd/gline.c: make make_gline() be called with separate user and
341 host arguments, and not call canon_userhost() directly; implement
342 gline_checkmask() to verify that a host mask is acceptable; move
343 BADCHAN check up in gline_add(), and check passed-in mask under
344 certain circumstances for acceptability; fix call to
345 sendto_opmask_butone() to handle separation of userhost into user
346 and host in gline_add(); update call to make_gline()
348 * ircd/client.c: use FEAT_OPER_WIDE_GLINE and
349 FEAT_LOCOP_WIDE_GLINE to set PRIV_WIDE_GLINE for an operator; add
350 PRIV_WIDE_GLINE to privtab[] for client_report_privs()
352 * include/whocmds.h (count_users): declare routine to count users
353 matching a given user@host mask
355 * include/numeric.h: added three new error returns: ERR_LONGMASK
356 -- mask can't be formatted into a buffer; ERR_TOOMANYUSERS -- too
357 many users would be impacted by the mask; ERR_MASKTOOWIDE -- mask
358 contains wildcards in the wrong places
360 * include/ircd_features.h: add FEAT_GLINEMAXUSERCOUNT,
361 FEAT_OPER_WIDE_GLINE, and FEAT_LOCOP_WIDE_GLINE
363 * include/gline.h (GLINE_OPERFORCE): provides a way for m_gline()
364 to signal to gline_add() that the operator attempted to force the
367 * include/client.h (PRIV_WIDE_GLINE): new privilege for operators
369 * doc/readme.gline: update to document new "!" prefix to a G-line
372 * doc/readme.features: document GLINEMAXUSERCOUNT,
373 OPER_WIDE_GLINE, and LOCOP_WIDE_GLINE
375 * doc/example.conf: update to mention new features along with
378 2001-06-27 Kevin L. Mitchell <klmitch@mit.edu>
380 * doc/example.conf: updated example.conf from Braden
383 * include/supported.h: forward-port from pl15
385 2001-06-25 Kevin L. Mitchell <klmitch@mit.edu>
387 * ircd/whocmds.c: include ircd_policy.h and implement
388 HEAD_IN_SAND_WHO_OPCOUNT--forward-port from pl15
390 * ircd/m_whois.c: forward-port of the idle-time hiding code from
391 pl15; this also required passing parc into do_whois(), which also
392 meant passing parc into do_wilds()--*sigh*
394 * include/ircd_policy.h: add a couple more HEAD_IN_SAND
395 #define's--WHOIS_IDLETIME and WHO_HOPCOUNT
397 2001-06-22 Kevin L. Mitchell <klmitch@mit.edu>
399 * tools/wrapper.c: add a wrapper program that can be used to
400 adjust file descriptor limits and root directories; program must
401 be run as root--NOT SETUID!--and given appropriate -u arguments
403 * doc/readme.log: documentation of how to configure logging
405 * doc/readme.features: documentation of each feature (except for
408 2001-06-21 Kevin L. Mitchell <klmitch@mit.edu>
410 * Makefile.in (config): add a deprecation notice with a pointer to
413 * tools/transition: shell script to convert old compile-time
414 options into new compile-time options and appropriate F-lines
416 * tools/mkchroot: shell-script to prepare the chroot area by
417 copying over all the necessary libraries so they can be found
419 2001-06-20 Kevin L. Mitchell <klmitch@mit.edu>
421 * INSTALL: partial update of INSTALL for u2.10.11 release...
423 2001-06-14 Kevin L. Mitchell <klmitch@mit.edu>
425 * ircd/table_gen.c (makeTables): finally got tired of the
426 "overflow in implicit conversion" warning, so just got rid of it
427 by explicitly casting UCHAR_MAX to a (default) char; diffs show no
428 differences in the tables generated
430 2001-06-11 Kevin L. Mitchell <klmitch@mit.edu>
432 * ircd/send.c (sendcmdto_match_butone): don't let the server crash
433 if a client is in the STAT_CONNECTING status
435 2001-06-10 Kevin L. Mitchell <klmitch@mit.edu>
437 * ircd/send.c: remove unused vsendcmdto_one(), consolidating it
438 into sendcmdto_one(); define new sendcmdto_prio_one(), which
439 places the message into the priority queue
441 * ircd/s_user.c (hunt_server_prio_cmd): definition of
442 hunt_server_prio_cmd(), which simply calls sendcmdto_prio_one()
443 instead of sendcmdto_one()
445 * ircd/m_settime.c: use sendcmdto_prio_one() and
446 hunt_server_prio_cmd() to send SETTIME
448 * ircd/m_server.c: use sendcmdto_prio_one() to send SETTIME
450 * include/send.h: removed declaration for unused vsendcmdto_one();
451 added a declaration for sendcmdto_prio_one()
453 * include/s_user.h: declare hunt_server_prio_cmd(), which calls
456 * ircd/send.c (sendcmdto_flag_butone): oops; /wallops should be
457 put in the server's priority queue, too...
459 * ircd/ircd.c: don't check LPATH for accessibility at all
461 2001-06-08 Kevin L. Mitchell <klmitch@mit.edu>
463 * ircd/s_serv.c (server_estab): send a +h flag in our SERVER
464 command if we're configured as a hub; send individual server flags
467 * ircd/s_bsd.c (completed_connection): send a +h flag in our
468 SERVER command if we're configured as a hub
470 * ircd/m_server.c: implement parv[7] as a mode-like string; +h
471 sets the FLAGS_HUB flag for a server; +s sets the FLAGS_SERVICE
472 flag for a server; +hs sets both flags; also modify CMD_SERVER
473 format string to send the flags
475 * include/client.h: define two new flags, FLAGS_HUB and
476 FLAGS_SERVICE to mark services and hubs as such; define testing
477 macros, setting macros
479 * ircd/s_user.c: remove deprecated struct Gline* argument to
480 register_user(); remove GLINE rebroadcast; do not send GLINE
481 acknowledgement parameter to NICK; do not look for GLINE
482 acknowledgement parameter to NICK while parsing
484 * ircd/s_serv.c (server_estab): remove deprecated struct Jupe*
485 argument to server_estab(); do not send JUPE/GLINE acknowledgement
486 parameters for SERVER or NICK
488 * ircd/m_user.c (m_user): remove deprecated argument to
491 * ircd/m_server.c: remove deprecated argument to server_estab();
492 remove documentation comment regarding JUPE acknowledgement
493 parameter to SERVER; remove JUPE rebroadcast
495 * ircd/m_pong.c (mr_pong): remove deprecated argument to
498 * ircd/m_nick.c: remove documentation comment regarding GLINE
499 acknowledgement parameter to NICK
501 * ircd/jupe.c: use user's real name in JUPE server notices if
502 HEAD_IN_SAND_SNOTICES is defined
504 * ircd/ircd.c: remove deprecated chroot() code; remove deprecated
505 setuid code; correct ancient DEBUG vs DEBUGMODE typo
507 * ircd/gline.c: use user's real name in GLINE server notices if
508 HEAD_IN_SAND_SNOTICES is defined
510 * ircd/channel.c (modebuf_flush_int): make apparent source be
511 local server, not oper's server; use user's real name in hack
512 notices and DESYNC notices if HEAD_IN_SAND_SNOTICES is defined
514 * include/s_user.h: remove struct Gline pre-declaration; remove
515 deprecated struct Gline argument from register_user()
517 * include/s_serv.h: remove struct Jupe pre-declaration; remove
518 deprecated struct Jupe argument from server_estab()
520 2001-06-07 Kevin L. Mitchell <klmitch@mit.edu>
522 * ircd/s_stats.c (hunt_stats): forward-port from pl15 of all the
523 changes required to control remote stats
525 * ircd/s_numeric.c (do_numeric): rewrite numeric origins if
526 recipient is not an operator and HEAD_IN_SAND_REWRITE is defined
527 [forward-port from pl15]
529 * ircd/m_whowas.c (m_whowas): report server name only if requester
530 is an operator [forward-port from pl15]
532 * ircd/m_whois.c (do_whois): /whois <mynick> now correctly reports
533 my server; if HEAD_IN_SAND_REMOTE is 1, ignore the middle argument
534 and obtain the report from the user's server [forward-port from
537 * ircd/m_who.c: add missing include for ircd_policy.h
538 [forward-port from pl15]
540 * ircd/m_version.c (m_version): require oper access for remote
541 /version if HEAD_IN_SAND_REMOTE is 1 [forward-port from pl15]
543 * ircd/m_time.c (m_time): require oper access for remote /time if
544 HEAD_IN_SAND_REMOTE is 1 [forward-port from pl15]
546 * ircd/m_stats.c: pass extra argument to hunt_stats(); correct
547 missing semicolon [forward-port from pl15]
549 * ircd/m_nick.c (ms_nick): hide the origin of certain collision
550 kills [forward-port from pl15]
552 * ircd/m_motd.c (m_motd): require oper access for remote /motd if
553 HEAD_IN_SAND_REMOTE is 1 [forward-port from pl15]
555 * ircd/m_lusers.c (m_lusers): require oper access for remote
556 /lusers if HEAD_IN_SAND_REMOTE is 1 [forward-port from pl15]
558 * ircd/m_burst.c (ms_burst): server-added bans are stored using
559 local server name, to hide remote server names; modes also are to
560 originate from the local server [forward-port from pl15]
562 * ircd/m_admin.c (m_admin): require oper access for remote /admin
563 if HEAD_IN_SAND_REMOTE is 1 [forward-port from pl15]
565 * ircd/channel.c (add_banid): if a server is adding a ban, use my
566 server name to hide the remote server's name [forward-port from
569 * ircd/Makefile.in: ran make depend
571 * include/s_stats.h: hunt_stats() has to have an extra argument to
572 support the forward-port from pl15
574 * include/ircd_policy.h: #define HEAD_IN_SAND_STATS_P; add
575 HEAD_IN_SAND_{BANWHO,REWRITE,REMOTE} [forward-port from pl15]
577 * ircd/engine_poll.c (engine_loop): remove bogus assert that I
578 forgot to check in the events branch
580 2001-06-06 Kevin L. Mitchell <klmitch@mit.edu>
582 * ircd/res.c (init_resolver): don't start DNS expires with a 0
583 relative timeout--if the server starts slow, timeouts could be
584 messy...there's probably a better solution, but this'll do for now
586 * ircd/os_solaris.c: _XOPEN_SOURCE doesn't get along with Solaris
587 headers very well; include stropts.h; define an os_set_tos()
589 * ircd/os_generic.c (os_set_tos): added an os_set_tos() for
592 * ircd/ircd.c: if there are no C-lines, we don't want to have a
593 timer that expires at the absolute time of 0--it kinda blocks all
596 * ircd/engine_devpoll.c: some includes for open(); declare errcode
597 and codesize in engine_loop()
599 * ircd/list.c (free_client): remove bogus check on timer active
602 * ircd/s_auth.c: pull out destruction code in
603 auth_timeout_request() into an externally-visible
604 destroy_auth_request(); manage cli_auth pointer in client
605 structure; use it for an extra assertion check
607 * ircd/list.c: include s_auth.h for destroy_auth_request(); add
608 debugging notices to show flow when deallocating
609 connections/clients; call destroy_auth_request() when free'ing a
610 client that has an auth outstanding; don't free the connection if
611 the process timer is unmarked but still active
613 * ircd/ircd_events.c: set GEN_ACTIVE when initializing a generator
614 and reset it before calling the event handler for an ET_DESTROY
617 * include/s_auth.h (destroy_auth_request): declare
618 destroy_auth_request(), which can be used to destroy an
619 outstanding auth request if a client socket goes away before the
620 auth exchange is completed
622 * include/ircd_events.h: add an active flag to keep track of
623 whether or not particular generators are active, for the
624 convenience of functions using the API
626 * include/client.h: add a pointer for auth requests to struct
627 Connection so we can kill outstanding auth requests if a client
628 socket closes unexpectedly
630 * ircd/s_bsd.c: cli_connect() could become 0 during the course of
631 the sock or timer callback; take that into account in the assert
633 * ircd/list.c: add magic number checking and setting--magic
634 numbers are zero'd on frees to detect double-frees; add back
635 setting of cli_from() to 0 to break the back-link from the struct
638 * ircd/ircd.c: set me's magic number correctly
640 * include/client.h: define magic numbers and accessor/verifier
643 * ircd/list.c: assert that dealloc_client() is called with
644 cli_connect(cptr) == 0; set cli_connect(cptr) to 0 before calling
645 dealloc_client(); don't mess with cli_from(cptr)
647 * ircd/s_bsd.c: only attempt to dealloc a connection if the
648 associated client has already been destroyed, or at least delinked
650 2001-06-05 Kevin L. Mitchell <klmitch@mit.edu>
652 * ircd/list.c (free_client): only try to delete the socket when
653 the fd hasn't already been closed, avoiding a double-free
655 * ircd/list.c (free_connection): make sure the client is really
656 gone before doing away with the connection
658 * ircd/s_bsd.c: record that socket has been added in con_freeflag
659 field; queue a socket_del() as soon as the socket is close()'d;
660 use con_freeflag & FREEFLAG_TIMER instead of con_timer; clear
661 FREEFLAG_SOCKET on ET_DESTROY event in client_sock_callback(),
662 then dealloc the connection if safe; mark socket as dead when
663 there's a read error or EOF; clear FREEFLAG_TIMER flag upon entry
664 to client_timer_callback(); dealloc connection if safe upon
665 ET_DESTROY event in client_timer_callback()
667 * ircd/list.c: use con_freeflag instead of con_timer; only dealloc
668 the connection if both socket and timer have been destroyed;
669 destroy both socket and timer explicitly and carefully
671 * include/client.h: replace the con_timer field with a
672 con_freeflag field, to indicate what still needs freeing; define
675 * ircd/engine_select.c (engine_loop): duh...sockList[i] could
678 * ircd/engine_devpoll.c (engine_loop): duh...sockList[i] could
681 * ircd/s_bsd.c: add some extra assertions to try to track down a
684 * ircd/engine_select.c (engine_loop): add an extra assert to try
685 to track down a corruption problem
687 * ircd/engine_poll.c (engine_loop): add an extra assert to try to
688 track down a corruption problem
690 * ircd/engine_kqueue.c (engine_loop): add an extra assert to try
691 to track down a corruption problem
693 * ircd/engine_devpoll.c (engine_loop): skip slots that have become
694 empty during processing; add an extra assert to try to track down
697 * ircd/engine_kqueue.c (engine_delete): make sure to zero deleted
700 2001-06-04 Kevin L. Mitchell <klmitch@mit.edu>
702 * ircd/s_bsd.c (client_sock_callback): client is no longer
703 blocked, so we must mark it as unblocked
705 * ircd/engine_select.c: add Debug() calls galore; add handling for
706 SS_NOTSOCK; use a dummy sock variable to keep things from
707 disappearing on us; correct timeout calculation; update nfds for
710 * ircd/engine_poll.c: use new debugging level (DEBUG_ENGINE);
711 remove a spurious "if (sock)" which will always be true; update
714 * ircd/engine_kqueue.c: add Debug() calls galore; add handling for
715 SS_NOTSOCK (just in case); correct timeout calculation
717 * ircd/engine_devpoll.c: add Debug() calls galore; add handling
718 for SS_NOTSOCK; correct timeout calculation; add EAGAIN handling
720 * include/s_debug.h (DEBUG_ENGINE): add new debugging level;
721 pretty-indent numbers
723 * ircd/engine_poll.c (engine_loop): break out SS_NOTSOCK
724 case--it's not a socket; the check for writability is most likely
725 not needed, but present for completeness
727 2001-05-24 Kevin L. Mitchell <klmitch@mit.edu>
729 * ircd/s_bsd.c: add Debug messages; call read_packet() even if the
730 no newline flag is set; call read_packet() when the timer expires,
731 regardless of what's in the buffer--read_packet() should be able
734 * ircd/IPcheck.c (ip_registry_connect_succeeded): correct a NOTICE
735 sent to clients to include the client nickname (duh)
737 * ircd/ircd_events.c: don't destroy a timer if it's already marked
738 for destruction; replace a missing ! in socket_del()
740 * ircd/engine_poll.c (engine_loop): reference a temporary variable
741 so we don't have to worry about sockList[i] going away
743 * ircd/s_bsd.c (client_sock_callback): add Debug messages
745 * ircd/s_auth.c: add Debug messages all over the place
747 * ircd/ircd_events.c: add and edit some Debug messages; add a list
748 of routines to convert some of the enums and flags from numbers
749 into human-readable strings for the Debug messages
751 * ircd/engine_poll.c: hack some Debug messages to use the new name
752 conversion routines in ircd_events.c; add an extra assert for a
753 condition that shouldn't ever happen; apparently recv() can return
754 EAGAIN when poll() returns readable--I wonder why...
756 * include/ircd_events.h: declare some helper routines under
759 2001-05-23 Kevin L. Mitchell <klmitch@mit.edu>
761 * ircd/s_bsd.c (client_sock_callback): add an extra assertion
764 * ircd/s_auth.c: add more Debug messages
766 * ircd/list.c (make_client): add an extra assertion check
768 * ircd/ircd_events.c (socket_events): don't call the engine events
769 changer if we haven't actually made any changes to the event mask
771 * ircd/uping.c: add some Debug messages
773 * ircd/s_stats.c: document new /STATS e
775 * ircd/s_err.c: add RPL_STATSENGINE to report the engine name
777 * ircd/s_bsd.c: remove static client_timer variable; in
778 read_packet(), if there's still data in the client's recvQ after
779 parsing, add a 2 second timer (con_proc); fix the ET_DESTROY case
780 of client_sock_callback to handle destroying the timer properly;
781 rewrote client_timer_callback from scratch to be called on an
784 * ircd/m_stats.c: add /STATS e to report the engine name
786 * ircd/list.c: deal with con_timer field in struct Connection
787 properly; correct a core-level bug in remove_client_from_list--if
788 the client is the only one in the list, we try to update
789 GlobalClientList's cli_prev pointer--not good
791 * ircd/ircd.c: remove call to init_client_timer()
793 * ircd/engine_poll.c: made Debug messages more uniform by
794 prepending "poll:" to them all; corrected an off-by-one error that
795 caused poll_count to be 1 less than the actual count and removed
796 my work-around; added Debug messages to indicate which socket is
797 being checked and what the results are
799 * ircd/Makefile.in: ran a make depend
801 * include/s_bsd.h: remove init_client_timer(), since we're doing
804 * include/numeric.h (RPL_STATSENGINE): a stats reply to report the
807 * include/ircd_policy.h (HEAD_IN_SAND_STATS_E): turn off /stats e
808 reports for non-opers
810 * include/client.h: add con_timer and con_proc fields to struct
811 Connection and define accessor macros--con_timer marks that
812 con_proc contains a valid timer, and con_proc is used to pace user
815 * ircd/s_bsd.c (close_connection): let free_client() destroy the
818 * ircd/s_auth.c (start_auth): add a Debug call to indicate when
819 auth has begun on a client
821 * ircd/ircd_events.c: ensure that event_execute() is called with a
822 non-NULL event; modify event_add() macro to properly zero list
823 bits; modify gen_dequeue() to not try to clip it out of a list
824 it's already been clipped out of; change signal socket
825 initialization to use state SS_NOTSOCK; permit timeout values of
826 0 in add_timer(); add many Debug calls; change socket_del() and
827 timer_del() to always set the GEN_DESTROY flag; use GEN_MARKED in
828 timer_run() instead of GEN_DESTROY so that event_generate() will
829 pass on the events; remove the switch and replace with a simpler
830 if-then-else tree in timer_run(); don't allow destroyed sockets to
831 be destroyed again, nor their states or event masks to be changed
833 * ircd/ircd.c: initialize "running" to 1
835 * ircd/engine_poll.c: deal with SS_NOTSOCK "sockets"; add Debug
836 messages all over the place; fix a counting problem in
837 engine_add(); turn wait into a signed integer and set it to -1
838 only if timer_next() returns 0; adjust wait time to be relative;
839 don't call gen_ref_dec() if socket disappeared while we were
842 * include/ircd_events.h: the pipe for signals is not a socket, so
843 we must mark it as such--added SS_NOTSOCK for that special socket;
844 events won't be generated if GEN_DESTROY is on, so add GEN_MARKED
845 for the benefit of timer_run()
847 * configure.in: add --enable-pedantic and --enable-warnings to
848 turn on (and off) -Wall -pedantic in CFLAGS
850 2001-05-21 Kevin L. Mitchell <klmitch@mit.edu>
852 * ircd/s_conf.c: change "s_addr" element accesses to "address"
855 * include/s_conf.h: on some systems, "s_addr" is a macro; use
858 2001-05-18 Kevin L. Mitchell <klmitch@mit.edu>
860 * ircd/engine_kqueue.c: include ircd_alloc.h; set_or_clear returns
861 void in this file; add a missing semi-colon; declare errcode,
864 * ircd/uping.c (uping_sender_callback): it's pptr, not uping
866 * ircd/s_user.c (register_user): comment out spurious reference to
869 * ircd/s_serv.c (server_estab): comment out spurious reference to
872 * ircd/s_conf.c (read_configuration_file): comment out spurious
873 reference to nextping and nextconnect
875 * ircd/s_bsd.c: comment out some spurious references to formerly
876 global (now non-existant) variables; correct a couple of typos
878 * ircd/s_auth.c: pre-declare some functions referenced in the
879 callback; correct a typo
881 * ircd/res.c (start_resolver): pass errno value of ENFILE
883 * ircd/listener.c (accept_connection): you know your API is messed
884 up when...variables that shouldn't have been global crop up in
887 * ircd/list.c (free_client): substitution of == for =
889 * ircd/ircd_signal.c: include assert.h for assertion checking;
890 check ev_data() to find out what signal generated event
892 * ircd/ircd_events.c: some references to the variable "timer"
893 should have been references to the variable "ptr"
895 * ircd/engine_select.c: it's struct fd_set, not struct fdset;
896 ev_timer(ev) is already a timer pointer; declare codesize as a
897 size_t to correct signedness issue; use timer_next(), not
900 * ircd/engine_poll.c: ev_timer(ev) is already a timer pointer;
901 select fd out of struct pollfd in assertion checking; declare
902 errcode and codesize; use timer_next(), not time_next()
904 * ircd/engine_kqueue.c: ev_timer(ev) is already a timer pointer;
905 use function timer_next(), not time_next()
907 * ircd/engine_devpoll.c: ev_timer(ev) is already a timer pointer;
908 use function timer_next(), not time_next()
910 * ircd/Makefile.in (IRCD_SRC): add ircd_events.c to the list of
911 compiled sources; do make depend
913 * include/list.h: pre-declare struct Connection
915 * include/ircd_events.h (gen_ref_inc): cast to the right structure
918 * include/s_auth.h: duh; missing */
920 2001-05-10 Kevin L. Mitchell <klmitch@mit.edu>
922 * ircd/send.c: update write events status after sending data or
923 accumulating data to be sent
925 * ircd/m_list.c (m_list): update write events status after
926 canceling a running /list
928 * ircd/channel.c (list_next_channels): update write events status
929 after listing a few channels
931 * ircd/s_bsd.c: extensive changes to update to new events model;
932 remove on_write_unblocked() and the two implementations of
933 read_message(), which have been deprecated by this change
935 * ircd/s_auth.c: set the socket events we're interested in for
936 clients; simplify some logic that does the connect_nonb followed
939 * ircd/list.c: define free_connection() to free a connection
940 that's become freeable once the struct Socket has been
941 deallocated; fix up free_client() to take this new behavior into
944 * ircd/ircd.c: call init_client_timer()
946 * include/s_bsd.h: declare new REGISTER_ERROR_MESSAGE when unable
947 to register connect-in-progress with events system; declare
948 init_client_timer() (HACK!) to preserve rate-limiting behavior
950 * include/list.h: declare new free_connection()
952 * include/client.h: add a struct Socket to struct Connection
954 2001-05-09 Kevin L. Mitchell <klmitch@mit.edu>
956 * ircd/ircd_signal.c: massage the handlers for SIGHUP, SIGINT, and
957 SIGTERM into event callbacks; perform the actions in the
958 callbacks, since they're not called in the context of the signal;
959 set up the signal callbacks in the event engine
961 * ircd/ircd_events.c (signal_callback): we're supposed to look for
962 a specific signal; don't generate an event if there is no signal
965 * ircd/ircd.c: nuke nextconnect and nextping and replace them with
966 connect_timer and ping_timer; massage try_connections() and
967 check_pings() into timer callbacks that re-add themselves at the
968 right time; remove ircd.c's "event_loop()"; initialize the event
969 system and the connect_timer and ping_timer
971 * ircd/uping.c: correct a couple more typos
973 * ircd/s_auth.c: rework to use new events system
975 * ircd/os_solaris.c (os_connect_nonb): update to new interface
977 * ircd/os_openbsd.c (os_connect_nonb): update to new interface
979 * ircd/os_linux.c (os_connect_nonb): update to new interface
981 * ircd/os_generic.c (os_connect_nonb): update to new interface
983 * ircd/os_bsd.c (os_connect_nonb): update to new interface
985 * include/s_auth.h: remove deprecated members of struct
986 AuthRequest, replacing them with struct Socket and struct Timer
987 structures; add flags to indicate when these structures have been
988 released by the event system; remove the deprecated
989 timeout_auth_queries()
991 * include/ircd_osdep.h (os_connect_nonb): connect could complete
992 immediately, so change the interface to handle that possibility
994 * ircd/uping.c (uping_server): noticed and corrected a typo
996 * ircd/listener.c: set up to use ircd_event's struct Socket by
997 adding an socket_add() call to inetport(), replacing
998 free_listener() with socket_del() in close_listener(), and
999 reworking accept_connection to be called as the callback
1001 * ircd/ircd.c: add a call to IPcheck_init()
1003 * ircd/IPcheck.c: remove IPcheck_expire(); rework
1004 ip_registry_expire() to be called from a timer; write
1005 IPcheck_init() to set up the expiration timer (hard-coded for a
1006 60-second expiration time)
1008 * include/listener.h: add a struct Socket to the struct Listener;
1009 remove accept_connection()
1011 * include/IPcheck.h: add IPcheck_init(), remove IPcheck_expire()
1013 2001-05-08 Kevin L. Mitchell <klmitch@mit.edu>
1015 * ircd/ircd_events.c: include config.h; use USE_KQUEUE and
1016 USE_DEVPOLL instead of HAVE_KQUEUE and HAVE_DEVPOLL_H
1018 * ircd/engine_select.c: include config.h; set FD_SETSIZE to
1019 MAXCONNECTIONS, not IRCD_FD_SETSIZE...
1021 * ircd/engine_poll.c: include config.h
1023 * ircd/engine_kqueue.c: include config.h
1025 * ircd/engine_devpoll.c: include config.h
1027 * ircd/Makefile.in: include engine sources in compilation and make
1030 * configure.in: add checks for enabling the /dev/poll- and
1031 kqueue-based engines
1033 * acconfig.h: add lines for USE_DEVPOLL and USE_KQUEUE
1035 * ircd/Makefile.in: work in the engine sources
1037 2001-05-07 Kevin L. Mitchell <klmitch@mit.edu>
1039 * ircd/m_settime.c: include ircd_snprintf.h
1041 * ircd/ircd_relay.c: stomp a couple of gcc warnings suggesting
1042 parens around a construct that had both || and &&
1044 * ircd/chkconf.c: #include "config.h" to get some important
1047 * ircd/Makefile.in: revamp ircd makefile for new build system
1049 * doc/Makefile.in: revamp doc makefile for new build system
1051 * config/*: Removed old build system files
1053 * stamp-h.in: a stamp file
1055 * install-sh: install-sh for new build system
1057 * configure.in: configure.in for new build system
1059 * configure: configure script for new build system (built by
1062 * config.sub: config.sub for new build system
1064 * config.h.in: config.h.in for new build system (built by
1067 * config.guess: config.guess for new build system
1069 * aclocal.m4: aclocal.m4 for new build system (built by aclocal
1072 * acinclude.m4: aclocal.m4 macros for new build system
1074 * acconfig.h: config.h skeleton for new build system
1076 * Makefile.in: modify for new build system
1078 2001-05-01 Kevin L. Mitchell <klmitch@mit.edu>
1080 * ircd/s_err.c: get rid of the last vestiges of TIME_T_FMT
1082 * ircd/m_settime.c: get rid of the last vestiges of TIME_T_FMT
1084 * ircd/m_server.c: get rid of the last vestiges of TIME_T_FMT
1086 2001-05-01 Perry Lorier <Isomer@coders.net>
1087 * doc/iauth.doc: Protocol for iauth server. (from hybrid).
1088 * doc/linux-poll.patch: Patch to make Linux under 2.2 not deadlock
1089 when you have far far too many sockets in use.
1090 * {include,ircd}/iauth.c: A start on iauth support.
1092 2001-05-01 Perry Lorier <Isomer@coders.net>
1093 * ircd/s_err.c: Suggested wording change.
1094 * ircd/s_user.c: Users aren't target limited against +k users.
1095 * ircd/chkconf.c: Made it compile again, who knows if it works, but
1096 now I can at least make install
1097 * various: Cleanups on m_*.c files.
1100 2001-04-23 Kevin L. Mitchell <klmitch@mit.edu>
1102 * ircd/s_misc.c (exit_client): make netsplit server notice say the
1105 * ircd/m_links.c (m_links_redirect): forward-port RPL_ENDOFLINKS
1106 change to make Khaled happy...
1108 * ircd/m_whois.c (do_whois): pull-up of m_whois() fix
1111 2001-04-21 Kevin L. Mitchell <klmitch@mit.edu>
1113 * ircd/msgq.c: finally remove the msgq_integrity() hack, as it's
1114 turned up no more bugs
1116 * ircd/ircd.c: use /* */ comments instead of // comments--all the
1119 * ircd/s_conf.c (conf_add_server): use /* */ comments instead of
1120 // comments--all the world's not gcc :(
1122 * ircd/runmalloc.c: finally garbage-collect unused file
1124 * include/runmalloc.h: finally garbage-collect unused file
1126 * ircd/<multiple files>: addition of '#include "config.h"' before
1127 all other includes in most .c files
1129 * include/<multiple files>: remove includes of config.h, which are
1130 now going into the raw .c files
1132 2001-04-20 Kevin L. Mitchell <klmitch@mit.edu>
1134 * ircd/m_whois.c (do_whois): display proper server name if the
1135 user is looking up himself
1137 * ircd/m_who.c (m_who): disable match by servername or display of
1138 server names by non-opers
1140 * include/ircd_policy.h: add define for
1141 HEAD_IN_SAND_WHO_SERVERNAME to cover full intent of sub-motion 15
1144 2001-04-18 Kevin L. Mitchell <klmitch@mit.edu>
1146 * ircd/s_conf.c: keep the $R in memory so we can see it clearly
1147 when we do a /stats k
1149 * ircd/s_user.c (set_user_mode): pull-up of changes to prevent
1150 users from turning on +s and +g
1152 * ircd/s_misc.c (exit_client): pull-up of changes to turn off
1155 * ircd/parse.c: pull-up of changes to disable /trace, /links, and
1158 * ircd/m_whois.c (do_whois): pull-up of server name masking for
1161 * ircd/m_user.c (m_user): removal of umode and snomask defaulting
1164 * ircd/m_stats.c (m_stats): pull-up of stats-disabling stuff
1166 * ircd/m_map.c (m_map_redirect): pull-up of m_map_redirect()
1168 * ircd/m_links.c (m_links_redirect): pull-up of m_links_redirect()
1170 * ircd/channel.c (channel_modes): pull-up of channel key display
1173 * include/ircd_policy.h: pull-up of ircd_policy.h
1175 * include/client.h: pull-up of Set/ClearServNotice()
1177 * ircd/gline.c (do_gline): report client name in G-line message
1180 * ircd/s_user.c (register_user): pull-up--show IP address in some
1181 server notices dealing only with users; report which connection
1184 * ircd/s_stats.c (report_deny_list): use conf->flags &
1185 DENY_FLAGS_IP insteaf of conf->ip_kill
1187 * ircd/m_stats.c (report_klines): use conf->flags & DENY_FLAGS_IP
1188 insteaf of conf->ip_kill
1190 * ircd/s_conf.c: use flags field in struct DenyConf; pull-up of
1193 * include/s_conf.h: use a flags field in struct DenyConf; define
1194 DENY_FLAGS_FILE, DENY_FLAGS_IP, and DENY_FLAGS_REALNAME for
1195 pull-up of K-line by real name
1197 * ircd/m_trace.c: pull-up of IP show for user connections
1199 * doc/example.conf: pull-up of the realname K-line documentation
1201 * ircd/ircd.c: forward port of pid file advisory locking mechanism
1203 2001-04-16 Kevin L. Mitchell <klmitch@mit.edu>
1205 * ircd/send.c (sendcmdto_flag_butone): recast to just broadcast to
1206 all servers, rather than to only servers that have +w/+g/whatever
1207 users on them; among other things, this removes that atrocity
1208 known as sentalong[] from this function
1210 * ircd/m_admin.c: must include ircd.h to declare "me"; must
1211 include hash.h to declare FindUser()
1213 * ircd/m_wallusers.c: implementation of WALLUSERS
1215 * ircd/m_desynch.c (ms_desynch): only send DESYNCHs to opers
1217 * ircd/m_wallops.c: only send WALLOPS to opers
1219 * ircd/parse.c: add WALLUSERS command to parser table
1221 * include/handlers.h: declare wallusers handlers
1223 * include/msg.h: add WALLUSERS command
1225 * ircd/send.c (sendcmdto_flag_butone): if FLAGS_OPER is or'd with
1226 flag, send only to appropriate opers
1228 2001-04-13 Kevin L. Mitchell <klmitch@mit.edu>
1230 * ircd/uping.c: refit to use the new events interface
1232 * ircd/res.c: refit to use the new events interface
1234 * ircd/ircd_events.c: create timer_chg(), which permits a
1235 (non-periodic) timer's expire time to be modified; change the
1236 logic in timer_run() so that timers that were re-added while the
1237 event was being processed will not be destroyed prematurely
1239 * include/uping.h: include the events header, declare some extra
1240 fields in struct UPing, remove timeout value, and define some
1241 flags for marking which cleanup items have yet to be done
1243 * include/ircd_events.h: add a prototype for timer_chg() to change
1244 the expire time of a running timer
1246 2001-03-13 Joseph Bongaarts <foxxe@wtfs.net>
1247 * ircd/os_openbsd.c: Tweaked the openbsd hack a bit.
1249 2001-03-07 Joseph Bongaarts <foxxe@wtfs.net>
1251 * config/configure.in: Add check for OpenBSD
1253 * ircd/os_openbsd.c: Add seperate os dep file for openbsd which
1254 differs from generic BSD, particularly in its handling of
1257 2001-02-12 Kevin L. Mitchell <klmitch@mit.edu>
1259 * ircd/m_gline.c (ms_gline): propagate a G-line that happened to
1260 have been added by a U-lined server, rather than going through the
1261 activate/deactivate logic; propagate G-line removals by U-lined
1264 * ircd/gline.c: rename propagate_gline() to gline_propagate();
1265 make gline_propagate() return an int 0 (convenience return); only
1266 update lastmod in gline_activate() and gline_deactivate() if the
1267 current lastmod is non-zero, since 0 lastmod is our flag of a
1268 U-lined server having added a G-line
1270 * include/gline.h (gline_propagate): exporting the G-line
1271 propagation function
1273 * ircd/m_list.c (m_list): duh; permit explicit channel name
1274 specification only when /list gets two arguments ("Kev
1275 #wasteland") rather than when /list gets more than two
1276 arguments--nice braino
1278 2001-01-29 Thomas Helvey <twhelvey1@home.com>
1280 * ircd/ircd_reply.c (need_more_params): fix bug that allowed
1281 unregistered clients to spam opers with protocol violation
1282 messages. Note: the bugfix may have eliminated some useful
1283 protocol violation messages.
1284 Please send protocol violation messages explicitly from the
1285 functions they are discovered in, you have much better context
1286 for the error there and it helps to document the behavior of the
1287 server. This was also a design bug in that it violated the
1288 "A function should do one thing" heuristic. Patching this one
1289 would have resulted in a continuous spawning of other bugs over
1290 the next 3 years, so I killed it. Check around for stuff this
1291 broke and readd the calls to protocol_violation in the functions
1292 that need to send the message.
1294 2001-01-29 Kevin L. Mitchell <klmitch@mit.edu>
1296 * ircd/channel.c (mode_parse_ban): stopper a tiny leak--if a ban
1297 already existed, then the logic would (attempt to) skip it, but
1298 would not free the ban string; now the ban string is free'd and
1299 the ban count is decremented, releasing the ban for use
1301 * ircd/s_user.c: make send_umode_out() take a prop argument
1302 instead of testing for the PRIV_PROPAGATE privilege itself; fix
1303 set_umode() to use this new argument, calculating it before
1304 calculating the new privileges for a -o'd user
1306 * ircd/m_oper.c (m_oper): pass the new prop argument to
1309 * ircd/channel.c (mode_parse_ban): turn off MODE_ADD bit in bans
1310 that we're not actually going to add because they already exist;
1311 test that particular bit before adding to the linked list
1313 * include/s_user.h: add a prop argument to send_umode_out() to
1314 indicate whether or not to propagate the user mode
1316 2001-01-24 Kevin L. Mitchell <klmitch@mit.edu>
1318 * ircd/msgq.c: ircd_vsnprintf() returns the number of bytes that
1319 it would have written; upper-bound the number to prevent overflows
1320 by proxy; also, tune buffer size given to ircd_vsnprintf() to take
1321 into account the fact that ircd_vsnprintf() already takes the
1322 terminal \0 into account
1324 2001-01-22 Kevin L. Mitchell <klmitch@mit.edu>
1326 * ircd/msgq.c: add an incredibly ugly hack to attempt to track
1327 down an apparent buffer overflow; remove msgq_map(), since it's no
1328 longer used anywhere; slight tweaks to prevent off-by-one errors,
1329 but these can't explain the problems we've seen
1331 * include/msgq.h: remove msgq_map(), since it's no longer used
1334 2001-01-18 Kevin L. Mitchell <klmitch@mit.edu>
1336 * ircd/s_user.c (set_nick_name): call client_set_privs() after
1339 2001-01-17 Kevin L. Mitchell <klmitch@mit.edu>
1341 * ircd/s_bsd.c (read_message): fix a typo in the select version of
1344 * ircd/whowas.c (whowas_free): MyFree() is a macro that expects
1345 its argument to be an lvalue, which means we can't use
1346 whowas_clean()'s handy-dandy "return ww" feature
1348 * ircd/ircd_features.c: default LOCOP_KILL to TRUE--oops...
1350 2001-01-16 Kevin L. Mitchell <klmitch@mit.edu>
1352 * ircd/ircd_events.c (timer_run): it's possible that the timer got
1353 deleted during the callback processing, so don't go to the bother
1354 of requeuing it if the destroy flag is set
1356 * ircd/engine_select.c: define FD_SETSIZE to be IRCD_FD_SETSIZE
1357 out of config.h if this is a *BSD; include errno.h (oops);
1358 decrement error count after an hour using a timer; use FD_SETSIZE
1359 constant instead of IRCD_FD_SETSIZE constant; fill in event
1362 * ircd/engine_poll.c: include errno.h (oops); decrement error
1363 count after an hour using a timer; fill in event processing code
1365 * ircd/engine_kqueue.c: include errno.h (oops); decrement error
1366 count after an hour using a timer; assert events filter is either
1367 EVFILT_READ or EVFILT_WRITE; fill in event processing code
1369 * ircd/engine_devpoll.c: include errno.h (oops); decrement error
1370 count after an hour using a timer; fill in event processing code
1372 2001-01-15 Kevin L. Mitchell <klmitch@mit.edu>
1374 * ircd/client.c: fixed feattab; basically, when I changed features
1375 to use small integers specifying bit positions, instead of the
1376 bits themselves, I forgot to update feattab to not | these
1377 privileges together; also fixed a bug in the antiprivs masking
1378 loop in client_set_privs()--last index wouldn't get parsed
1380 2001-01-11 Kevin L. Mitchell <klmitch@mit.edu>
1382 * ircd/ircd_events.c: call event_generate() with new data
1383 argument; make it set that field in struct Event; make
1384 socket_add() return the value of the eng_add callback
1386 * ircd/engine_select.c: make engine_add() return a
1387 successful/unsuccessful status; add bounds-checking outside of an
1388 assert; use accessor macros; use log_write(), not the deprecated
1389 ircd_log(); add an assert to engine_loop() to double-check for
1390 data structure corruption
1392 * ircd/engine_poll.c: make engine_add() return a
1393 successful/unsuccessful status; add bounds-checking outside of an
1394 assert; use accessor macros; use log_write(), not the deprecated
1395 ircd_log(); add an assert to engine_loop() to double-check for
1396 data structure corruption
1398 * ircd/engine_kqueue.c: implementation of an engine for kqueue()
1400 * ircd/engine_devpoll.c: implementation of an engine for /dev/poll
1402 * include/ircd_events.h: define some accessor macros; add ev_data
1403 to struct Event for certain important data--errno values, for
1404 instance; make EngineAdd callback tell us if it was successful or
1405 not; add extra argument to event_generate(); make socket_add()
1406 return the status from EngineAdd
1408 2001-01-10 Kevin L. Mitchell <klmitch@mit.edu>
1410 * ircd/ircd_events.c: pass initializer information about how many
1411 total _filedescriptors_ may be opened at once
1413 * ircd/ircd.c: use exported "running" instead of unexported
1416 * ircd/engine_select.c: implementation of an event engine based on
1419 * ircd/engine_poll.c: implementation of an event engine based on
1422 * include/ircd_events.h: pass the engine initializer an integer
1423 specifing how many _filedescriptors_ may be opened at once
1425 * include/ircd.h: running has to be exported for the engine_*
1428 2001-01-09 Kevin L. Mitchell <klmitch@mit.edu>
1430 * ircd/ircd_events.c: include some needed headers; add some
1431 comments; make evEngines[] const; bundle sig_sock and sig_fd into
1432 a struct named sigInfo; rework struct evInfo to have a queue of
1433 _generators_, and only when threaded; added a gen_init() function
1434 to centralize generator initialization; fix various compile-time
1435 errors; rework event_add() for new queueing scheme and checked for
1436 compile-time errors; add casts where needed; spell evEngines[]
1437 correctly; make engine_name() return const char*
1439 * include/ircd_events.h: type EventCallBack depends on struct
1440 Event, so pre-declare it; put _event_ queue into generators, and
1441 only when threaded; give engine data a union to store both ints
1442 and pointers; make engine name a const; fix gen_ref_dec() macro;
1443 make engine_name() return a const char*
1445 * ircd/ircd_events.c: gen_dequeue() is now exported, so move it
1446 down with the non-static functions; modify event_execute() to use
1447 the new gen_ref_dec() to simplify code; make sure event_generate()
1448 does not generate new events for generators marked for destruction
1450 * include/ircd_events.h: the engines, at least, may need to modify
1451 reference counts to keep generators from going away while
1452 something still points at them, so add reference counter
1453 manipulators and export gen_dequeue() for them
1455 * ircd/ircd_events.c: set up the list of engines to try; set up
1456 the signal struct Socket; rename netInfo to evInfo; move static
1457 functions near the beginning of the file; do away with
1458 signal_signal() (since we no longer keep a signal count ourselves)
1459 and call event_generate() directly from signal_callback--also
1460 renamed some functions; allow signal_callback() to read up to
1461 SIGS_PER_SOCK at once from the signal pipe; add event_init() to
1462 initialize the entire event system; add event_loop() to call the
1463 engine's event loop; initialize new struct GenHeader member,
1464 gh_engdata; remove timer_next(); add socket_add() function to add
1465 a socket; add socket_del() to mark a socket for deletion; add
1466 socket_state() to transition a socket between states; add
1467 socket_events() to set what events we're interested in on the
1468 socket; add engine_name() to retrieve event engine's name
1470 * include/ircd_events.h: add engine data field to struct
1471 GenHeader; rename SOCK_ACTION_REMOVE to SOCK_ACTION_DEL; add a
1472 note about states vs s_events; remove signal count; fold union
1473 Generator back into struct Event; remove count members from struct
1474 Generators; redefine engine callbacks to not take a struct
1475 Engine*; add explanatory comments to callback definitions; add
1476 some engine callbacks to handle operations; remove struct Engine
1477 flag member--can detect single flag from eng_signal member; add
1478 event_init(), event_loop(), engine_name(), and the socket_*()
1479 functions; make timer_next() a macro to avoid a function call
1481 2001-01-08 Kevin L. Mitchell <klmitch@mit.edu>
1483 * include/ircd_events.h: rename to ircd_events.h, since it handles
1484 events, not just networking stuff; add signal support; more
1485 structural rearrangement
1487 * ircd/ircd_events.c: rename to ircd_events.c, since it handles
1488 events, not just networking stuff; add signal support; more
1489 structural rearrangement
1491 2001-01-07 Kevin L. Mitchell <klmitch@mit.edu>
1493 * ircd/ircd_network.c: implement timer API; add reference counts
1496 * include/ircd_network.h: firm up some pieces of the interface;
1497 split out members everything has into a separate structure; add
1498 reference counts; add timer API
1500 2001-01-06 Kevin L. Mitchell <klmitch@mit.edu>
1502 * ircd/ircd_network.c: static data and event manipulation
1503 functions for new event processing system
1505 * include/ircd_network.h: data structures for new event processing
1508 2001-01-03 Kevin L. Mitchell <klmitch@mit.edu>
1510 * ircd/whowas.c: Completely re-did the old allocation scheme by
1511 turning it into a linked list, permitting the
1512 NICKNAMEHISTORYLENGTH feature to be changed on the fly
1514 * ircd/s_debug.c (count_memory): use FEAT_NICKNAMEHISTORYLENGTH
1515 feature instead of old #define
1517 * ircd/ircd_features.c: add NICKNAMEHISTORYLENGTH feature as an
1518 integer feature with a notify callback (whowas_realloc)
1520 * ircd/client.c (client_set_privs): second memset was supposed to
1521 be over antiprivs, not privs; thanks, Chris Behrens
1522 <cbehrens@xo.com> for pointing that out...
1524 * include/whowas.h: new elements for an extra linked list in
1525 struct Whowas; a notify function for feature value changes
1527 * include/ircd_features.h: new feature--FEAT_NICKNAMEHISTORYLENGTH
1529 * config/config-sh.in: NICKNAMEHISTORYLENGTH is now a feature
1531 2001-01-02 Kevin L. Mitchell <klmitch@mit.edu>
1533 * config/config-sh.in: get rid of DEFAULT_LIST_PARAMETER
1534 compile-time option--now in features subsystem
1536 * ircd/motd.c (motd_init): rework motd_init() to be called as the
1537 notify function for MPATH and RPATH features (should probably
1538 split it up a bit, though...)
1540 * ircd/m_privs.c (mo_privs): if called with no parameters, return
1541 privs of the caller, rather than an error
1543 * ircd/m_list.c: pull usage message into its own function; pull
1544 list parameter processing into its own function that does not
1545 modify the contents of the parameter; add list_set_default() to
1546 set the default list parameter (uses the notify hook); rework
1547 m_list() to make use of these functions; removed dead code
1549 * ircd/ircd_log.c (log_feature_mark): make sure to return 0, since
1550 we have no notify handler
1552 * ircd/ircd_features.c: add notify callback for notification of
1553 value changes; give mark callback an int return value to indicate
1554 whether or not to call the notify callback; fix up feature macros
1555 for new notify callback; add DEFAULT_LIST_PARAM feature; rewrite
1556 string handling in feature_set() to deal with def_str being a null
1557 pointer; wrote feature_init() to set up all defaults appropriately
1559 * ircd/ircd.c (main): call feature_init() instead of
1560 feature_mark(), to avoid calling notify functions while setting up
1563 * ircd/client.c: updated to deal with new privileges structure
1565 * ircd/class.c: updated so init_class() can be called should one
1566 of PINGFREQUENCY, CONNECTFREQUENCY, MAXIMUM_LINKS, or
1567 DEFAULTMAXSENDQLENGTH be changed
1569 * include/ircd_log.h: log_feature_mark() updated to fit with new
1572 * include/ircd_features.h: added DEFAULT_LIST_PARAM feature and
1573 feature_init() function (found necessary since adding the notify
1574 stuff and notifying motd.c during start-up...before we defined
1577 * include/client.h: move privs around to enable addition of more
1578 bits if necessary; based on the FD_* macros
1580 * include/channel.h: declare list_set_default (actually located in
1583 * ircd/s_user.c: retrieve MAXSILES and MAXSILELENGTH (now
1584 AVBANLEN*MAXSILES) from features subsystem
1586 * ircd/s_debug.c (debug_serveropts): CMDLINE_CONFIG doesn't go to
1589 * ircd/s_bsd.c: retrieve HANGONGOODLINK and HANGONRETRYDELAY from
1590 the features subsystem
1592 * ircd/s_auth.c (start_auth): NODNS migrated to the features
1595 * ircd/random.c: created random_seed_set() function to set seed
1596 value, along with some stuff to make ircrandom() a little more
1597 random--state preserving, xor of time instead of direct usage,
1598 etc.; it's still a pseudo-random number generator, though, and
1599 hopefully I haven't broken the randomness
1601 * ircd/m_version.c: FEATUREVALUES makes use of feature_int() calls
1603 * ircd/m_join.c: use features interface to retrieve
1606 * ircd/ircd_features.c: add NODISP flag for super-secret features;
1607 add a whole bunch of new features migrated over from make config
1609 * ircd/ircd.c: use features interface to retrieve PINGFREQUENCY,
1610 CONNECTTIMEOUT, and TIMESEC
1612 * ircd/client.c (client_get_ping): use features interface to
1613 retrieve PINGFREQUENCY
1615 * ircd/class.c: use features interface to retrieve PINGFREQUENCY,
1616 CONNECTFREQUENCY, MAXIMUM_LINKS, and DEFAULTMAXSENDQLENGTH
1618 * ircd/chkconf.c (DEFAULTMAXSENDQLENGTH): since it's now in the
1619 features subsystem, we have to add something explicit
1621 * ircd/channel.c: use features interface to retrieve
1622 KILLCHASETIMELIMIT, MAXBANLENGTH, MAXBANS, and MAXCHANNELSPERUSER;
1623 note that MAXBANLENGTH is now calculated dynamically from MAXBANS
1626 * ircd/Makefile.in: run make depend
1628 * include/supported.h (FEATURESVALUES): update to reference
1631 * include/random.h: add prototype for random_seed_set
1633 * include/ircd_features.h: add several more features
1635 * include/channel.h: move MAXBANS and MAXBANLENGTH into feature
1638 * config/config-sh.in: feature-ized some more stuff
1640 * include/motd.h: some new elements in motd.h for motd.c changes
1642 * ircd/motd.c: motd_cache() now searches a list of already cached
1643 MOTD files; saves us from having duplicate caches in memory if
1644 there are two identical T-lines for two different sites...
1646 2001-01-02 Perry Lorier <isomer@coders.net>
1647 * ircd/motd.c: don't core if the motd isn't found. Bug found by
1650 2001-01-02 Perry Lorier <isomer@coders.net>
1651 * ircd/s_err.c: Added third param to 004 - the channel modes that tage params. Used by hybrid/epic.
1652 * ircd/s_channels.c: Added fix for msg'ing a -n+m channel - thanks
1653 to guppy for noticing, and hektik for providing the fix.
1654 * misc others: Minor cleanups, added more protocol_violations, ripped
1655 out more P09 stuffs, bit more protocol neg stuff.
1657 2000-12-19 Kevin L. Mitchell <klmitch@mit.edu>
1659 * ircd/m_ison.c (m_ison): Dianora says that ISON has to end with a
1660 space (*sigh* stupid clients...)
1662 * ircd/s_user.c: make WALLOPS_OPER_ONLY a feature managed through
1665 * ircd/s_err.c: get rid of GODMODE conditionals
1667 * ircd/s_debug.c (debug_serveropts): switch to using appropriate
1668 calls into the features subsystem for various serveropts
1671 * ircd/s_conf.c (find_conf_entry): get rid of USEONE conditional
1673 * ircd/s_bsd.c: remove GODMODE conditional; use features subsystem
1674 to get value of VIRTUAL_HOST and CLIENT_FLOOD; remove
1675 NOFLOWCONTROL conditional
1677 * ircd/s_auth.c: use features subsystem to determine value of
1680 * ircd/parse.c: get rid of NOOPER and GODMODE conditionals; use
1681 features subsystem to determine the setting of IDLE_FROM_MSG
1683 * ircd/numnicks.c: get rid of EXTENDED_NUMERICS conditionals
1685 * ircd/motd.c: get value of NODEFAULTMOTD from features subsystem;
1686 use features subsystem to get motd file names
1688 * ircd/m_settime.c: get value of RELIABLE_CLOCK from features
1691 * ircd/m_server.c: get rid of CRYPT_LINK_PASSWORD, since it does
1692 us no good; use features subsystem to figure out if we need to do
1693 HUB-type stuff; make TESTNET debugging sendto_opmask_butone's use
1694 the Debug(()) macro instead; get value of RELIABLE_CLOCK from
1697 * ircd/m_privmsg.c: get IDLE_FROM_MSG from the features subsystem
1699 * ircd/m_oper.c: get CRYPT_OPER_PASSWORD from the features
1702 * ircd/m_connect.c: get SERVER_PORT from the features subsystem
1704 * ircd/ircd_log.c (log_set_file): fix a bug that kept log files
1705 from getting marked if they were already set to something...
1707 * ircd/ircd_features.c: add a flag to indicates read-only access;
1708 add several new features that used to be compile-time selected
1710 * ircd/ircd.c: grab pidfile out of feature subsystem; don't check
1711 access to motd files (what the heck?); make sure to initialize the
1712 feature subsystem before trying to write the config file
1714 * ircd/dbuf.c: use feature_int() to retrieve BUFFERPOOL settings;
1715 use feature_bool() to figure out if we're using the FERGUSON
1718 * ircd/Makefile.in: MPATH and RPATH are now done differently, so
1719 remove the clause that creates empty files of that name; also ran
1722 * include/sys.h: CLIENT_FLOOD is now a feature; unfortunately,
1723 there is no easy way to bounds-check it at present
1725 * include/querycmds.h: make sure ircd_features.h is included; use
1726 feature_str(FEAT_DOMAINNAME) in calls to match()
1728 * include/ircd_features.h: many new features that used to be
1729 compile-time selected
1731 * config/config-sh.in: add * to DOMAINNAME; try also using first
1732 argument to search in /etc/resolv.conf; removed many compile-time
1733 options that now can be configured through the features system
1735 2000-12-18 Kevin L. Mitchell <klmitch@mit.edu>
1737 * doc/api/log.txt: how to use the logging API
1739 * doc/api/features.txt: how to use the features API
1741 * doc/api/api.txt: how to write API documentation
1743 * include/ircd_features.h: rearranged a couple of features for
1746 * ircd/ircd_features.c: cleaned up the macros some; rearranged
1747 some code to all go into the switch; rearranged a couple of
1748 features for neatness purposes
1750 2000-12-16 Greg Sikorski <gte@atomicrevs.demon.co.uk>
1751 * ircd/os_bsd.c: Added os_set_tos for BSD users.
1753 2000-12-16 Kevin L. Mitchell <klmitch@mit.edu>
1755 * ircd/ircd_features.c: Isomer almost got it right; you need to
1756 use F_I(), since it's an integer value, not a boolean value. The
1757 asserts in feature_int would catch you out... Also made the F_*
1760 * ircd/s_err.c: define RPL_PRIVS reply
1762 * ircd/parse.c: put new PRIVS command into command table
1764 * ircd/m_privs.c (mo_privs): message handler to report operator
1767 * ircd/ircd_features.c: declare new features OPER_SET and
1768 LOCOP_SET; redo boolean testing routine to accept TRUE, YES, and
1769 ON for boolean TRUE, and FALSE, NO, and OFF for boolean FALSE
1771 * ircd/client.c: simplify client_set_privs() with a table that
1772 defines what features to test for; add new client_report_privs()
1774 * ircd/Makefile.in: compile new m_privs.c; run make depend
1776 * include/numeric.h (RPL_PRIVS): new reply numeric for displaying
1777 an operator's privileges
1779 * include/msg.h: define new command: PRIVS
1781 * include/ircd_features.h: create new features OPER_SET and
1782 LOCOP_SET for controlling access to /set
1784 * include/handlers.h (mo_privs): declare message handler for
1785 reporting oper privileges
1787 * include/client.h (client_report_privs): declare function to
1788 report what privileges an oper has
1790 * ircd/m_whois.c (do_whois): fix a bug that caused /whois to
1791 report that a user is an oper if the oper doing the /whois had
1794 2000-12-17 Isomer <Isomer@coders.net>
1795 * ircd/listener.c: added support for TOS twiddling as a 'feature'.
1797 2000-12-17 Isomer <Isomer@coders.net>
1798 * ircd/os_linux.c: add TOS stuffs
1800 * ircd/listener.c: add TOS stuffs
1802 2000-12-16 Kevin L. Mitchell <klmitch@mit.edu>
1804 * ircd/whocmds.c (do_who): use HasPriv to determine whether or not
1805 to indicate a user is an oper
1807 * ircd/s_user.c: clear privileges setting when deopping; don't
1808 propagate +o unless user has PRIV_PROPAGATE privilege
1810 * ircd/s_debug.c (debug_serveropts): created debug_serveropts()
1811 function and replaced how the server option string is generated
1813 * ircd/parse.c: remove conditional on CONFIG_OPERCMDS
1815 * ircd/m_whois.c (do_whois): use HasPriv to determine whether or
1816 not to indicate the user is an operator
1818 * ircd/m_who.c: use HasPriv to determine whether or not a user
1819 should be displayed in the list of opers
1821 * ircd/m_version.c: call debug_serveropts() to get server option
1824 * ircd/m_userip.c (userip_formatter): use HasPriv to determine
1825 whether or not to show oper status
1827 * ircd/m_userhost.c (userhost_formatter): use HasPriv to determine
1828 whether or not to show oper status
1830 * ircd/m_restart.c (mo_restart): replace ugly #ifdef conditional
1831 checks with HasPriv check; remove dead code
1833 * ircd/m_rehash.c (mo_rehash): replace ugly #ifdef conditional
1834 checks with HasPriv check
1836 * ircd/m_opmode.c (mo_opmode): use HasPriv to check permissions;
1837 use feature_bool to check if disabled
1839 * ircd/m_oper.c (m_oper): set oper priviliges
1841 * ircd/m_mode.c (m_mode): replace #ifdef conditional with HasPriv
1844 * ircd/m_kill.c (mo_kill): use HasPriv checks to determine if we
1847 * ircd/m_kick.c (m_kick): replace #ifdef conditional with HasPriv
1850 * ircd/m_jupe.c (mo_jupe): rework permissions checking structure;
1851 use feature_bool to check if disabled
1853 * ircd/m_join.c (m_join): remove BADCHAN conditional; replace
1854 #ifdef conditional with a HasPriv check
1856 * ircd/m_gline.c (mo_gline): rework permissions checking
1857 structure; use feature_bool to check if any part is disabled
1859 * ircd/m_die.c: replace ugly #ifdef conditionals with HasPriv
1860 check; remove dead code
1862 * ircd/m_clearmode.c: use feature_bool() to detect if we're
1863 disabled; use HasPriv to figure out what we're permitted to do;
1864 only allow clearmode on moded channels
1866 * ircd/ircd_features.c: define various features; use HasPriv to
1867 verify permissions to set/reset
1869 * ircd/gline.c (gline_add): use HasPriv instead of #ifdef
1872 * ircd/client.c (client_set_privs): function to set an oper's
1875 * ircd/channel.c: use HasPriv calls instead of #ifdef conditionals
1877 * include/whocmds.h: deconditionalize several macros and
1878 substitute appropriate calls to HasPriv()
1880 * include/s_debug.h: get rid of global serveropts[]; define new
1881 function debug_serveropts() to build that string on the fly
1883 * include/ircd_features.h: define some features
1885 * include/client.h: add privs member to struct Connection; define
1888 * include/channel.h: no longer using IsOperOnLocalChannel; remove
1889 conditional of MAGIC_OPER_OVERRIDE on OPER_WALK_THROUGH_LMODES
1891 * doc/Configure.help: remove help information for deprecated
1894 * config/config-sh.in: remove certain deprecated options having to
1895 do with what opers can and cannot do--first stage in moving
1896 compile-time constants into the .conf
1898 2000-12-16 Isomer <Isomer@coders.net>
1899 * ircd/parse.c: detect if the prefix is missing and try and recover
1902 2000-12-15 Kevin L. Mitchell <klmitch@mit.edu>
1904 * ircd/ircd_log.c: found and fixed some bugs in the debug logging
1905 code that would sometimes result in the log file not being
1906 reopened--which meant that a user could connect and get the
1907 logging output--oops
1909 * ircd/Makefile.in: run make depend...
1911 * ircd/s_stats.c: get rid of report_feature_list()
1913 * ircd/s_err.c: add the 'bad value' error message, shift error
1914 messages over somewhat
1916 * ircd/s_debug.c (debug_init): call log_debug_init with the
1919 * ircd/s_conf.c (read_configuration_file): unmark features before
1920 reading the config file, then reset unmarked features after
1921 reading the config file
1923 * ircd/m_stats.c: use feature_report() instead of
1924 report_feature_list()
1926 * ircd/ircd_log.c: fix log_debug_file (bogus assertion); add
1927 special 'mark' flags and use them; add the stuff needed by the
1930 * ircd/ircd_features.c: rework the features API and add gobs of
1931 comments to try to explain what some of these complex functions
1934 * include/s_stats.h: get rid of report_feature_list(); use
1935 feature_report() instead
1937 * include/numeric.h: added a new error message and shifted old
1938 values over some--this is, after all, an alpha
1940 * include/ircd_log.h: log_debug_init now takes an integer to tell
1941 it if it should be using the tty; added a couple of functions
1942 required by the features API
1944 * include/ircd_features.h: add an enum and some more functions to
1945 flesh out the feature API--it should now be possible to put all
1946 those compile-time constants in the config file!
1948 * ircd/send.c: got the direction of the assert incorrect...
1950 * ircd/send.c: implement the efficiency of flush_connections by
1951 creating a linked list of struct Connection's with queued data;
1952 also get rid of flush_sendq_except and make sure to yank
1953 connections out of the list when their sendQs become empty (notice
1954 the assertion in flush_connections!)
1956 * ircd/s_bsd.c (close_connection): must yank the Connection out of
1959 * ircd/list.c (dealloc_connection): must yank the Connection out
1962 * ircd/dbuf.c (dbuf_put): call flush_connections instead of the
1963 deprecated flush_sendq_except
1965 * ircd/client.c: define a couple new helper functions for sendq
1966 threading--this will make the flush_connections function in send.c
1967 considerably more efficient by creating a linked list of
1968 Connections that have queued data to send
1970 * include/send.h: remove flush_sendq_except, as it's not used
1973 * include/client.h: declare a couple new helper functions for the
1974 sendq threading system
1976 2000-12-14 Kevin L. Mitchell <klmitch@mit.edu>
1978 * ircd/m_ison.c (m_ison): Apply Diane Bruce's patch to make ISON
1981 * ircd/s_debug.c (count_memory): modify to report for clients and
1982 connections, not local clients and remote clients
1984 * ircd/list.c: fiddle with the client-fiddling functions to take
1985 into account the divorce of struct Connection from struct Client
1987 * ircd/ircd.c: define a struct Connection for me, initialize it,
1988 and link it into the right place (ewww, globals!)
1990 * include/client.h: remove CLIENT_{LOCAL,REMOTE}_SIZE; split
1991 struct Client into struct Client and struct Connection; redefine
1992 local-portion accessor macros to go through struct Client to the
1993 struct Connection; define struct Connection accessor macros
1995 2000-12-13 Kevin L. Mitchell <klmitch@mit.edu>
1997 * ircd/whowas.c: missed a couple of accesses to a struct Client
1999 * ircd/uping.c: missed a couple of accesses to a struct Client
2001 * ircd/send.c: missed a couple of accesses to a struct Client
2003 * ircd/s_user.c: missed a couple of accesses to a struct Client
2005 * ircd/s_misc.c: missed a couple of accesses to a struct Client
2007 * ircd/s_conf.c: missed a couple of accesses to a struct Client
2009 * ircd/s_bsd.c: missed a couple of accesses to a struct Client
2011 * ircd/s_auth.c: missed a couple of accesses to a struct Client
2013 * ircd/res.c: missed a couple of accesses to a struct Client
2015 * ircd/parse.c: missed a couple of accesses to a struct Client
2017 * ircd/m_whois.c: use new accessor macros for struct Client
2019 * ircd/m_who.c: use new accessor macros for struct Client
2021 * ircd/m_wallchops.c: use new accessor macros for struct Client
2023 * ircd/m_version.c: use new accessor macros for struct Client
2025 * ircd/m_userip.c: use new accessor macros for struct Client
2027 * ircd/m_userhost.c: use new accessor macros for struct Client
2029 * ircd/m_user.c: use new accessor macros for struct Client
2031 * ircd/m_uping.c: use new accessor macros for struct Client
2033 * ircd/m_trace.c: use new accessor macros for struct Client
2035 * ircd/m_topic.c: use new accessor macros for struct Client
2037 * ircd/m_time.c: use new accessor macros for struct Client
2039 * ircd/m_stats.c: use new accessor macros for struct Client
2041 * ircd/m_squit.c: use new accessor macros for struct Client
2043 * ircd/m_silence.c: use new accessor macros for struct Client
2045 * ircd/m_server.c: use new accessor macros for struct Client;
2048 * ircd/m_rpong.c: use new accessor macros for struct Client
2050 * ircd/m_rping.c: use new accessor macros for struct Client
2052 * ircd/m_quit.c: use new accessor macros for struct Client
2054 * ircd/m_privmsg.c: use new accessor macros for struct Client
2056 * ircd/m_pong.c: use new accessor macros for struct Client; remove
2059 * ircd/m_ping.c: use new accessor macros for struct Client
2061 * ircd/m_pass.c: use new accessor macros for struct Client
2063 * ircd/m_part.c: use new accessor macros for struct Client
2065 * ircd/m_oper.c: use new accessor macros for struct Client
2067 * ircd/m_notice.c: use new accessor macros for struct Client
2069 * ircd/m_nick.c: use new accessor macros for struct Client
2071 * ircd/m_names.c: use new accessor macros for struct Client
2073 * ircd/m_mode.c: use new accessor macros for struct Client
2075 * ircd/m_map.c: use new accessor macros for struct Client
2077 * ircd/m_list.c: use new accessor macros for struct Client
2079 * ircd/m_links.c: use new accessor macros for struct Client;
2080 remove some dead code
2082 * ircd/m_kill.c: use new accessor macros for struct Client; remove
2085 * ircd/m_kick.c: use new accessor macros for struct Client
2087 * ircd/m_join.c: use new accessor macros for struct Client; remove
2090 * ircd/m_ison.c: use new accessor macros for struct Client
2092 * ircd/m_invite.c: use new accessor macros for struct Client
2094 * ircd/m_info.c: use new accessor macros for struct Client
2096 * ircd/m_gline.c: use new accessor macros for struct Client
2098 * ircd/m_error.c: use new accessor macros for struct Client
2100 * ircd/m_create.c: use new accessor macros for struct Client
2102 * ircd/m_connect.c: use new accessor macros for struct Client;
2103 removed some dead code
2105 * ircd/m_burst.c: use new accessor macros for struct Client
2107 * ircd/m_away.c: use new accessor macros for struct Client
2109 * ircd/m_admin.c: use new accessor macros for struct Client
2111 * ircd/hash.c: missed a couple of accesses to a struct Client
2113 * ircd/gline.c: missed a couple of accesses to a struct Client
2115 * ircd/crule.c: missed a couple of accesses to a struct Client
2117 * ircd/class.c: missed an access to a struct Client
2119 * ircd/channel.c: missed a couple of accesses to a struct Client
2121 * ircd/IPcheck.c: missed an access to a struct Client
2123 * include/querycmds.h: fix a couple of stats macros to use
2124 structure accessor macros
2126 * include/client.h: change structure member names to highlight any
2127 places in the code I've missed
2129 2000-12-12 Kevin L. Mitchell <klmitch@mit.edu>
2131 * ircd/whowas.c: use new struct Client accessor macros
2133 * ircd/whocmds.c: use new struct Client accessor macros
2135 * ircd/send.c: use new struct Client accessor macros
2137 * ircd/s_user.c: use new struct Client accessor macros; removed
2140 * ircd/s_serv.c: use new struct Client accessor macros; removed
2143 * ircd/s_numeric.c: use new struct Client accessor macros
2145 * ircd/s_misc.c: use new struct Client accessor macros
2147 * ircd/s_debug.c: use new struct Client accessor macros
2149 * ircd/s_conf.c: use new struct Client accessor macros
2151 * ircd/s_bsd.c: use new struct Client accessor macros
2153 * ircd/s_auth.c: use new struct Client accessor macros
2155 * ircd/parse.c: use new struct Client accessor macros
2157 * ircd/packet.c: use new struct Client accessor macros
2159 * ircd/numnicks.c: use new struct Client accessor macros
2161 * ircd/motd.c: use new struct Client accessor macros
2163 * ircd/listener.c: use new struct Client accessor macros
2165 * ircd/list.c: use new struct Client accessor macros
2167 * ircd/jupe.c: use new struct Client accessor macros
2169 * ircd/ircd_snprintf.c: use new struct Client accessor macros
2171 * ircd/ircd_reply.c: use new struct Client accessor macros
2173 * ircd/ircd_relay.c: use new struct Client accessor macros
2175 * ircd/ircd.c: use new struct Client accessor macros
2177 * ircd/gline.c: catch some instances of me.<stuff> I missed
2180 * ircd/client.c: use cli_ instead of con_
2182 * ircd/class.c: use cli_ instead of con_
2184 * ircd/channel.c: use cli_ instead of con_
2186 * ircd/IPcheck.c: use cli_ instead of con_; catch some instances
2187 of me.<stuff> I missed previously
2189 * include/client.h: use cli_ instead of con_...seemed like a good
2190 idea at the time *shrug*
2192 2000-12-11 Kevin L. Mitchell <klmitch@mit.edu>
2194 * ircd/hash.c: use struct Client accessor macros
2196 * ircd/gline.c: use struct Client accessor macros
2198 * ircd/crule.c: use struct Client accessor macros
2200 * ircd/client.c: use struct Client accessor macros; remove some
2203 * ircd/class.c: use struct Client accessor macros
2205 * ircd/channel.c: use struct Client accessor macros; remove some
2208 * ircd/IPcheck.c: use struct Client accessor macros
2210 * include/numnicks.h: use struct Client accessor macros
2212 * include/client.h: first step to divorcing struct Client and
2213 struct Connection--define accessor macros and use them
2215 * ircd/gline.c: When Uworld removed Uworld-set G-lines, only the
2216 uplink would remove them. This is because the removal protocol
2217 message wasn't being sent to the uplinks. This is fixed by fixing
2218 propagate_gline() to send the proper number of arguments depending
2219 on whether or not we're adding or deleting the Uworld gline, and
2220 by having gline_deactivate() make sure to turn off the active bit
2221 and call propagate_gline() if it's a Uworld gline
2223 2000-12-10 Kevin L. Mitchell <klmitch@mit.edu>
2225 * ircd/os_generic.c: make sure IOV_MAX gets defined, just in case
2227 * ircd/os_bsd.c: apparently BSD doesn't have IOV_MAX defined
2228 anywhere intelligent...
2230 2000-12-09 Kevin L. Mitchell <klmitch@mit.edu>
2232 * ircd/send.c (send_queued): call deliver_it with appropriate
2235 * ircd/s_serv.c: reorder a couple of headers--cosmetic
2237 * ircd/s_bsd.c (deliver_it): make deliver_it work with a struct
2240 * ircd/os_solaris.c (os_sendv_nonb): function for calling writev
2241 with appropriate iovec
2243 * ircd/os_linux.c (os_sendv_nonb): function for calling writev
2244 with appropriate iovec
2246 * ircd/os_generic.c (os_sendv_nonb): function for calling writev
2247 with appropriate iovec
2249 * ircd/os_bsd.c (os_sendv_nonb): function for calling writev with
2252 * ircd/msgq.c (msgq_mapiov): add a len_p argument for totalling up
2253 exactly how much we're trying to write out to the fd
2255 * include/s_bsd.h: make deliver_it take a struct MsgQ
2257 * include/msgq.h: add a len_p argument to msgq_mapiov to help
2258 detect short writes that indicate possible socket blocking
2260 * include/ircd_osdep.h: declare os_sendv_nonb()
2262 * ircd/channel.c (modebuf_mode): don't add empty modes...
2264 2000-12-08 Kevin L. Mitchell <klmitch@mit.edu>
2266 * include/send.h: add prio argument to send_buffer to select
2267 between normal and priority queues
2269 * ircd/s_user.c (send_user_info): add prio argument to send_buffer
2272 * ircd/m_ison.c (m_ison): add prio argument to send_buffer call
2274 * ircd/ircd_reply.c (send_reply): add prio argument to send_buffer
2277 * ircd/channel.c (send_channel_modes): add prio argument to
2280 * ircd/send.c (send_buffer): add a prio argument to select the
2281 priority queue; update send.c functions to use it
2283 * ircd/msgq.c (msgq_add): remove msgq_prio; fold msgq_link and
2284 msgq_add; add a prio argument to msgq_add to select the priority
2287 * include/msgq.h: remove msgq_prio; add a prio argument to
2290 * ircd/send.c: remove sendbuf; remove GODMODE code; switch to
2291 using msgq functions instead of dbuf functions; remove old, dead
2292 sendto_* functions; redo send_buffer to take a struct MsgBuf;
2293 rework sendcmdto_* functions to make use of the new struct MsgBuf
2295 * ircd/s_user.c: remove hunt_server; restructure send_user_info to
2296 make appropriate use of struct MsgBuf
2298 * ircd/s_debug.c (count_memory): count memory used by the MsgQ
2299 system and report it
2301 * ircd/s_conf.c (read_configuration_file): use
2302 sendto_opmask_butone instead of the now dead sendto_op_mask
2304 * ircd/s_bsd.c: switch to using appropriate MsgQLength and other
2307 * ircd/parse.c (parse_server): get rid of a piece of GODMODE code
2309 * ircd/msgq.c: add msgq_append and msgq_bufleft; fix a bug in
2312 * ircd/m_version.c: fix spelling in comments marking dead code
2314 * ircd/m_userip.c (userip_formatter): restructure to make use of
2317 * ircd/m_userhost.c (userhost_formatter): restructure to make use
2320 * ircd/m_stats.c: use MsgQLength on a sendQ
2322 * ircd/m_settime.c: use MsgQLength instead of DBufLength on a
2323 sendQ; mark a piece of dead code
2325 * ircd/m_names.c: use send_reply instead of sendto_one
2327 * ircd/m_mode.c: use new mode; remove old dead code
2329 * ircd/m_ison.c (m_ison): restructure to make use of struct MsgBuf
2331 * ircd/m_burst.c: use BUFSIZE instead of IRC_BUFSIZE; remove old
2334 * ircd/listener.c (accept_connection): use sendto_opmask_butone
2335 instead of sendto_op_mask
2337 * ircd/list.c (free_client): use MsgQClear to clear sendQ
2339 * ircd/ircd_reply.c: remove send_error_to_client; restructure
2340 send_reply to make use of struct MsgBuf
2342 * ircd/dbuf.c (dbuf_put): remove argument to flush_sendq_except,
2343 since its no longer used (at least currently)
2345 * ircd/channel.c: restructure send_channel_modes to make use of
2346 struct MsgBuf; remove set_mode, add_token_to_sendbuf, cancel_mode,
2347 and send_hack_notice; use BUFSIZE instead of IRC_BUFSIZE
2349 * ircd/Makefile.in: add msgq.c to list of sources; run make depend
2351 * ircd/IPcheck.c: use sendcmdto_one instead of sendto_one
2353 * include/send.h: send_buffer now takes a struct MsgBuf * instead
2354 of a char *; flush_sendq_except now takes no arguments, as sendq
2355 flushing currently only happens in dbuf.h and sendQ is a struct
2356 MsgQ; remove prototypes for a lot of old sendto_* functions that
2357 aren't used anymore; remove sendbuf and IRC_BUFSIZE--the former is
2358 no longer needed, and the latter is identical to BUFSIZE in
2361 * include/s_user.h: make InfoFormatter take a struct MsgBuf*
2362 instead of a char *; also make it return void, instead of char *
2364 * include/msgq.h: add msgq_append and msgq_bufleft functions
2366 * include/client.h: use a struct MsgQ instead of a struct DBuf for
2369 * doc/Configure.help: Remove help for compile-time options that
2372 * config/config-sh.in: remove CONFIG_NEWMODE
2374 * ircd/m_server.c (mr_server): don't send server IPs in any server
2377 * ircd/msgq.c (msgq_vmake): add \r\n to messages
2379 2000-12-07 Kevin L. Mitchell <klmitch@mit.edu>
2381 * include/msgq.h: declare the MsgQ API
2383 * ircd/msgq.c: implementation of new MsgQ system
2385 2000-12-06 Kevin L. Mitchell <klmitch@mit.edu>
2387 * ircd/ircd_features.c: #include was supposed to be for
2388 ircd_features.h, not features.h--missed when I had to do a
2389 rename because of namespace collision
2391 2000-12-05 Greg Sikorski <gte@atomicrevs.demon.co.uk>
2392 * ircd/m_topic.c: Added missing braces that caused all remote
2393 topics to be ignored.
2395 2000-12-04 Kevin L. Mitchell <klmitch@mit.edu>
2397 * ircd/m_create.c: I'm tired of the exit_client warning :)
2398 (ms_create): discovered that exit_client() was being called with
2401 * ircd/s_misc.c (exit_client): remove all dependance on
2402 FNAME_USERLOG, since that's now gone; log only to LS_USER
2404 * ircd/s_debug.c: USE_SYSLOG no longer means anything
2406 * ircd/m_oper.c (m_oper): no longer log to LS_OPERLOG--we already
2409 * ircd/m_kill.c: no longer conditionalize on SYSLOG_KILL
2411 * ircd/ircd_log.c: remove LS_OPERLOG, LS_USERLOG
2413 * include/ircd_log.h: remove LS_OPERLOG, LS_USERLOG--they serve
2414 the same purpose as LS_USER and LS_OPER
2416 * config/config-sh.in: remove no longer relevant log config
2419 * ircd/uping.c (uping_init): use log_write instead of ircd_log
2421 * ircd/s_misc.c (exit_client): use log_write instead of ircd_log
2423 * ircd/s_conf.c: use log_write instead of ircd_log
2425 * ircd/s_bsd.c (report_error): use log_write instead of ircd_log
2427 * ircd/s_auth.c (timeout_auth_queries): use log_write instead of
2430 * ircd/res.c (send_res_msg): use log_write instead of ircd_log
2432 * ircd/m_who.c: use log_write instead of write_log; no longer
2433 conditionalize on WPATH; mark dead ircd_log calls
2435 * ircd/m_uping.c: mark dead ircd_log call
2437 * ircd/m_server.c (mr_server): use log_write instead of ircd_log
2439 * ircd/m_restart.c: use log_write instead of ircd_log; mark dead
2442 * ircd/m_rehash.c (mo_rehash): use log_write instead of ircd_log
2444 * ircd/m_oper.c: use log_write instead of ircd_log; no longer
2445 conditionalize on FNAME_OPERLOG; mark dead ircd_log calls
2447 * ircd/m_kill.c: mark dead ircd_log calls
2449 * ircd/m_connect.c: use log_write instead of ircd_log; mark dead
2452 * ircd/m_clearmode.c: use log_write instead of write_log; no
2453 longer conditionalize on OPATH
2455 * ircd/jupe.c: use log_write instead of write_log; no longer
2456 conditionalize on JPATH
2458 * ircd/ircd_log.c: add USER subsystem; remove ircd_log() compat
2459 function; fix a couple of bugs
2461 * ircd/ircd_alloc.c: fixed a comment
2463 * ircd/ircd.c: use log_write instead of ircd_log; fold server
2464 notice generation in a couple of cases
2466 * ircd/gline.c: use log_write instead of write_log; no longer
2467 conditionalize on GPATH
2469 * ircd/channel.c (modebuf_flush_int): use log_write instead of
2470 write_log; no longer conditionalize on OPATH
2472 * ircd/Makefile.in: run make depend, since dependencies have
2475 * doc/example.conf: add system USER to documentation
2477 * include/ircd_log.h: add system USER; remove old ircd_log()
2480 2000-12-04 Isomer <isomer@coders.net>
2481 * ircd/m_names.c: Add NAMES_EON to do_names to say add a
2482 'end_of_names' reply when done.
2483 * ircd/m_join.c: use NAMES_EON as mentioned above
2485 2000-12-01 net <simms@LUCIDA.QC.CA>
2487 * ircd/motd.c: add a freelist for struct Motds
2489 2000-11-30 Kevin L. Mitchell <klmitch@mit.edu>
2491 * ircd/s_stats.c (report_feature_list): report features--only
2492 local opers can see logging configuration, since it doesn't really
2493 mean anything to users
2495 * ircd/s_err.c: add reply messages for new feature subsystem
2497 * ircd/s_conf.c: add F lines to .conf
2499 * ircd/parse.c: add the message descriptions for /set, /reset, and
2502 * ircd/m_stats.c: add /stats f
2504 * ircd/m_set.c (mo_set): implement /set
2506 * ircd/m_reset.c (mo_reset): implement /reset
2508 * ircd/m_rehash.c: /rehash m now flushes MOTD cache, and /rehash l
2509 reopens log files (for log file rotation)
2511 * ircd/m_get.c (mo_get): implement /get
2513 * ircd/ircd_log.c: use int instead of void return value; add
2514 log_report_features() and log_canon(); fix a function that
2515 disappears if DEBUGMODE not #define'd
2517 * ircd/ircd_features.c: functions to manipulate feature settings
2518 either from the config file or with the new /set, /reset, and /get
2521 * ircd/Makefile.in: add new .c files, run make depend
2523 * include/s_stats.h: declare report_feature_list() (/stats f
2526 * include/numeric.h: add RPL_STATSFLINE, RPL_FEATURE,
2527 ERR_NOFEATURE, ERR_BADLOGTYPE, ERR_BADLOGSYS, and ERR_BADLOGVALUE
2530 * include/msg.h: add defines for SET, RESET, and GET
2532 * include/ircd_log.h: add a function to canonicalize subsystem
2533 names; change some void return values to int
2535 * include/ircd_features.h: new features subsystem handles all the
2536 manipulation of special features, like log files
2538 * include/handlers.h: declare new mo_{s,res,g}et message handlers
2539 for fiddling with features run-time
2541 * include/client.h (SNO_DEFAULT): don't set SNO_DEBUG by default;
2542 seemed like a good idea at the time...
2544 * doc/example.conf: document new F lines
2546 2000-11-29 Kevin L. Mitchell <klmitch@mit.edu>
2548 * ircd/s_debug.c: rewrite debug_init() and vdebug() in terms of
2549 new logging functions, which have special support for the debug
2550 log; added loop detection to vdebug(), so that I can
2551 sendto_opmask_butone() from log_vwrite() without incurring another
2554 * ircd/s_conf.c (rehash): call log_reopen() from rehash routine;
2555 this allows log file rotations
2557 * ircd/m_kill.c: call log_write_kill() instead of ircd_log_kill()
2559 * ircd/ircd_log.c: much more work fleshing out the interface;
2560 removed old interface; included backwards-compat ircd_log()
2561 function that logs to subsystem LS_OLDLOG
2563 * ircd/ircd.c: switch to new log_init()/log_close()/log_reopen()
2566 * include/ircd_log.h: include stdarg.h for va_list; move ordering
2567 warning to top of file; fill out LogSys enum; declare new
2568 log_debug_init(), log_vwrite(), log_write_kill(), and
2569 log_[sg]et_*() functions; add flags argument to log_write();
2570 defined flags to inhibit various logging actions
2572 * include/client.h: added support for new SNO_DEBUG, enabled only
2573 if DEBUGMODE is defined
2575 2000-11-28 Kevin L. Mitchell <klmitch@mit.edu>
2577 * ircd/ircd_log.c: make sure the various LOG_* constants are
2578 defined (probably not needed, since #include <syslog.h> isn't
2579 conditional); various static data needed for the new logging
2580 functions; definitions of new logging functions
2582 * include/ircd_log.h: new LogSys enum, declarations for part of
2585 * ircd/motd.c: we were setting type to MOTD_CLASS unconditionally,
2586 which was of course stupid; switched to using switch/case in
2587 initialization in motd_create(); zero the MotdList.other pointer
2590 * ircd/ircd.c (main): motd_init() has to come before init_conf(),
2591 or we overwrite init_conf()'s hard work with respect to T-lines
2593 2000-11-27 Kevin L. Mitchell <klmitch@mit.edu>
2595 * ircd/s_stats.c: comment out report_motd_list and include a
2596 reference to motd_report()
2598 * ircd/s_conf.c: rip out the old MOTD manipulation functions; call
2599 motd_add() from the conf parser; call motd_clear() from the rehash
2600 routine; remove the no longer needed memory clearing and reloading
2601 stuff from the rehash service routine
2603 * ircd/motd.c: loads new API, including static internal functions
2604 to do allocation/deallocation, etc.
2606 * ircd/m_stats.c: use new motd_report() instead of
2609 * ircd/m_motd.c: use new syntax for motd_send()
2611 * ircd/ircd.c: use new motd_init() function
2613 * ircd/Makefile.in (SRC): forgot to add motd.c to SRC in
2614 Makefile.(in); also ran make depend
2616 * include/motd.h: don't need config.h, but now do need time.h;
2617 define new structures and constants; redefine old API and define
2620 2000-11-22 Kevin L. Mitchell <klmitch@mit.edu>
2622 * ircd/s_user.c (register_user): use motd_signon() instead of
2623 calling m_motd; much cleaner this way
2625 * ircd/motd.c: write the new motd_* stuff to make MOTD handling
2628 * ircd/m_motd.c: rewrite m{,s}_motd to call out to new motd_*
2631 * include/motd.h: define new MOTD API stuff
2633 2000-11-20 Kevin L. Mitchell <klmitch@mit.edu>
2635 * ircd/ircd_reply.c (protocol_violation): rewrite
2636 protocol_violation so it'll actually work
2638 oh, yeah, use %s -> cptr->name, instead of %c -> cptr, so we get
2639 the client's real name in there.
2641 * ircd/m_motd.c (m_motd): Iso's addition of get_client_class(sptr)
2642 resulted in core dumps if NODEFAULTMOTD is defined, because m_motd
2643 gets called from register_user with a NULL sptr. This is probably
2644 a design problem, but this bandaid will do for now...
2646 2000-11-19 Isomer <isomer@coders.net>
2647 * ircd/ircd_reply.c: added 'protocol_violation', thus alerting us
2648 to problems in the server<->server protocol.
2650 * ircd/m_connect.c: allow remote connects with a port of '0'
2651 meaning to use the port in the config file.
2653 * ircd/m_create.c: Enable hacking protection, lets see how far we
2656 * ircd/m_error.c: The RFC says never accept ERROR from unreg'd
2657 clients, so we don't any more.
2659 * ircd/m_kill.c: The kill path is now made up of numnicks of servers,
2660 and the user@host is displayed of the victim.
2662 * ircd/m_map.c: reloaded 'dump_map'.
2664 * ircd/m_trace.c: allow per class T:
2666 * ircd/m_stats.c: allow local opers /remote stats anywhere on the 'net.
2668 2000-11-17 Isomer <isomer@coders.net>
2670 * ircd/m_topic.c: Fixed bug where we'd only send to clients topics
2671 that were the *same* instead of different. Oh the embarrasment!
2673 * ircd/IPcheck.c: Merged net's fix.
2675 2000-11-02 Kevin L. Mitchell <klmitch@mit.edu>
2677 * ircd/m_whois.c: remove compiler warning by adding a newline to
2680 * ircd/m_names.c: moved the flags up to s_user.h
2682 * ircd/m_join.c: call do_names instead of m_names; restructure
2683 ms_join to never transmute a JOIN into a CREATE, but use the TS in
2684 the JOIN (if present) to timestamp the channel
2686 * ircd/channel.c: send JOINs individually, instead of grouping
2687 them, so that we can send the channel's creation time
2689 * include/s_user.h: declare do_names()
2691 2000-10-30 Isomer <isomer@coders.net>
2692 * ircd/m_oper.c: Fixed warning
2694 2000-10-30 Isomer <isomer@coders.net>
2695 * ircd/m_oper.c: Fixed over agressive cut and no paste
2697 2000-10-30 Isomer <isomer@coders.net>
2699 * ircd/m_topic.c: Restructured, fixed bug where topics on local
2700 channels are propergated (I forget who pointed this out to me, but
2701 thanks anyway). Also to save bandwidth don't send the topic to
2702 users if the topic is already the same on the server (but still
2703 propergate to other servers). X/W's "autotopic" feature must
2704 chew a lot of bandwidth, hopefully this will help reduce this.
2706 * doc/rfc1459.rfc: Updated documentation on /topic.
2708 * ircd/listener.c: snotice warnings about failed accept()'s
2709 potentially warning admins that they're running out of fd's.
2711 * ircd/stats.c, ircd/class.c: Removed /stats v, added number of
2712 people in a class in /stats y
2714 * ircd/m_create.c: Checks for timewarp hacking and squit's
2715 evil servers. (currently disabled)
2718 2000-10-30 net <simms@lucida.qc.ca>
2720 * ircd/gline.c: Fixed various bugs Isomer left behind.
2722 2000-10-26 Kevin L. Mitchell <klmitch@mit.edu>
2724 * ircd/m_join.c (m_join): reply on attempt to join a BADCHANed
2725 channel is now ERR_BANNEDFROMCHAN instead of ERR_BADCHANNAME
2727 2000-10-24 Kevin L. Mitchell <klmitch@mit.edu>
2729 * ircd/channel.c: ok, now last mode rules; mode +ps will always
2730 result in +s (and won't send a mode if the channel is already +s);
2731 mode +sp will always result in +p; -n+n on a +n channel results in
2732 no mode change; -n+n on a -n channel results in a +n mode change;
2735 2000-10-23 Kevin L. Mitchell <klmitch@mit.edu>
2737 * ircd/channel.c: add "add" and "del" elements to ParseState to
2738 avoid not-too-pretty -p+s when +s is sufficient; fix a bug in
2739 mode_parse_limit that caused it to clear all channel modes
2740 prematurely; restructure mode_parse_mode to avoid calling
2741 modebuf_mode too early (ties in with first mentioned change);
2742 better logic for +p/+s mutual exclusivity; initialize "add" and
2743 "del" elements in mode_parse; send simple modes down to
2744 modebuf_mode after the loop in mode_parse
2746 2000-09-28 Greg Sikorski <gte@atomicrevs.demon.co.uk>
2747 * ircd/m_names.c: Fixed a non-lethal logic error that
2748 triggers an assert() in find_member_link while debugging.
2749 (Spotted by Maniac-).
2750 2000-09-19 Thomas Helvey <helveytw@home.com>
2751 * ircd/s_conf.c: move K:lines to their own list and data
2752 structures, add supporting code.
2753 * ircd/m_stats.c: cleanup stats processing a bit move
2754 kline listing code to a new function, haven't figured
2755 out where it goes yet tho'
2756 * ircd/s_stats.c: added K:line bulk lister
2757 * include/s_conf.h: added new DenyConf struct
2758 * *[ch]: fixeup code that depended on changes
2760 2000-09-17 Thomas Helvey <helveytw@home.com>
2761 * ircd/class.c: encapsulate class list
2762 * include/class.h: clean up classes
2763 * * fixup code that depended on changes
2765 2000-09-17 Thomas Helvey <helveytw@home.com>
2766 * ircd/s_conf.c: add me to local conf
2767 * include/s_conf.h: move CONF_ME macro to chkconf.c
2768 * ircd/s_bsd.c: cleanup initialization, allow virtual host
2769 to be changed by rehash
2771 2000-09-17 Thomas Helvey <helveytw@home.com>
2772 * include/class.h: add missing prototype
2773 * ircd/class.c: make argument to get_conf_class const
2775 2000-09-17 Thomas Helvey <helveytw@home.com>
2776 * ircd/*.c: merged in changes from 2.10.10.pl12, cleanup
2778 * ircd/*.h: merged in changes from 2.10.10.pl12, cleanup
2781 2000-09-16 Thomas Helvey <helveytw@home.com>
2782 * ircd/s_conf.c: add code for server struct
2783 * ircd/client.c: copy of class.c sort of, new file for client
2784 specific operations, will move things here as appropriate,
2785 currently only one function is exported from here.
2786 * ircd/*.c: general logic cleanups, convert negatives to
2787 positives in places.
2789 2000-09-16 Thomas Helvey <helveytw@home.com>
2790 * ircd/s_conf.c: add code for new crule data structs, strip quotes
2791 * ircd/crule.c: clean up scary casting a bit, type safety stuff
2792 * include/s_conf.h: add CRuleConf struct and support, remove
2794 * include/crule.h: type safety cleanups
2795 * ircd/*.c: fixup code that depended on stuff I changed
2797 2000-09-15 Thomas Helvey <helveytw@home.com>
2798 * ircd/s_conf.c: start adding code for new conf data structs, changed
2799 listeners, admin line, motd lines, class lines. Move validate_hostent
2800 to resolver. General mayhem.
2801 * include/s_conf.h: new data structs and accessors
2802 * ircd/res.c: move validate_hostent here, rewrite, use regular
2803 expression for validation.
2804 * doc/example.conf: update docs for port
2806 2000-09-14 Thomas Helvey <helveytw@home.com>
2807 * ircd/s_conf.c (conf_init): rewrite conf file parser, start to break
2808 up conf_init into managable chunks.
2809 * ircd/listener.c (set_listener_mask): fix logic bug core dump.
2810 * include/s_conf.h: add new data struct for local info (unwinding the mess).
2812 2000-09-13 Thomas Helvey <helveytw@home.com>
2813 * ircd/list.c: put Clients in free lists, pre-allocate MAXCONNECTIONS
2815 * ircd/list.c: put SLinks in free lists
2816 * ircd/channel.c: put Memberships in free lists
2817 * ircd/ircd.c: rearrange initializations a bit in main
2818 Note: With these changes, ircd NEVER frees Clients, SLinks or
2819 Memberships. It will also rarely need to allocate new
2820 ones during net bursts and other disruptions. This should
2821 cut down on memory fragmentation a bit as well.
2823 2000-08-30 Kevin L. Mitchell <klmitch@mit.edu>
2825 * ircd/m_names.c (do_names): pull-up from do_names fix in
2828 2000-07-15 Perry Lorier <Isomer@coders.net>
2829 * various: IP only k:'s and G:'s now do bit tests instead of two(!)
2830 match()'s. Major Major cpu savings. Also speed up the
2831 other case slightly. As a side effect you can now
2832 k/Gline *@10.0.0.0/8. I'll do bans tomorrow, it's nearing
2835 2000-07-15 Perry Lorier <Isomer@coders.net>
2836 * various: Fixed warnings after compiling on an alpha.
2837 2000-07-09 Perry Lorier <Isomer@coders.net>
2838 * doc/ircd.8: Applied grammitical changes by Liandrin, applied
2839 changes suggested by various other people.
2840 * ircd/IPcheck.c: More bug fixes. Current problem appears to be
2841 that it gets a corrupt entry somehow.
2842 2000-07-09 Greg Sikorski <gte@atomicrevs.demon.co.uk>
2843 * ircd/m_oper.c: Clean up compiler warning.
2845 2000-07-08 Perry Lorier <Isomer@coders.net>
2846 * doc/ircd.8: Updated the documentation, it was slightly out of date
2847 being updated around 1989.
2848 * ircd/m_whois.c: Rewrote for clarity, and probably a bit more speed.
2849 fixed a few minor glitches.
2850 * doc/rfc1459.unet: Updated.
2851 * ircd/IPcheck.c: Fixed more bugs.
2852 * ircd/s_bsd.c: We now keep track of servers we've conected.
2854 2000-07-02 Perry Lorier <Isomer@coders.net>
2855 * ircd/s_misc.c: Fixed remote IPcheck bug. Ok, I'm a moron, so sue
2856 me. Thanks to Hektik, thanks thanks thanks thanks
2857 thanks thanks thanks thanks thank thanks thank thanks
2859 2000-07-01 Perry Lorier <Isomer@coders.net>
2860 * ircd/s_conf.c: "Fixed" the "bug" where people would "evade" K:'s.
2861 * ircd/s_conf.c, include/IPcheck.h: Fixed compile warnings.
2863 2000-06-22 Perry Lorier <Isomer@coders.net>
2864 * ircd/IPcheck.c: Large chunks redone.
2865 * ircd/s_conf.c: Changes due to IPcheck - ONE nolonger supported,
2866 single AND double digit limits are allowed now.
2867 * misc other: Changes to IPcheck.
2869 2000-06-30 Perry Lorier <Isomer@coders.net>
2870 * ircd/ircd.c: Fix command line parameter bugs.
2872 2000-06-30 Perry Lorier <Isomer@coders.net>
2873 * ircd/m_kill.c: Fixed bug with LOCAL_KILL_ONLY
2874 * ircd/m_nick.c: Tidied things up.
2876 2000-06-12 Joseph Bongaarts <foxxe@trms.com>
2877 * ircd/m_stats.c: Iso forgot mo_stats when he added /stats v
2879 2000-05-29 Perry Lorier <Isomer@coders.net>
2880 * ircd/m_stats.c: add /stats v to do only the last part of the /trace
2881 * ircd/IPcheck.c: Cosmetic change, if we meddle with it enough do
2882 you think it'll get bored and fix itself?
2884 2000-06-09 Greg Sikorski <gte@atomicrevs.demon.co.uk>
2886 * ircd/m_names.c: Clean up compiler warnings.
2888 2000-06-09 Kevin L. Mitchell <klmitch@mit.edu>
2890 * ircd/channel.c (mode_parse_client): don't send warning if
2891 there's not enough arguments for a +/-o/v; means the habit of
2892 doing "/mode #channel +oooooo bob" doesn't result in a bunch of
2895 2000-06-04 Greg Sikorski <gte@atomicrevs.demon.co.uk>
2897 * ircd/m_names.c: Re-factor code to remove unneccessary
2898 GlobalChannelList iteration every time someone joins a channel.
2900 2000-06-02 Kevin L. Mitchell <klmitch@mit.edu>
2902 * ircd/s_user.c: add struct Gline * argument to register_user;
2903 look up global glines and repropagate them if necessary; send
2904 acknowledgement of gline to remote servers when registering users
2906 * ircd/s_serv.c (server_estab): don't send acknowledgement of
2907 local glines to remote servers; do send gline acknowledgement of
2910 * ircd/m_user.c (m_user): pass new struct Gline * argument to
2913 * ircd/m_pong.c: pass new struct Gline * argument to register_user
2915 * ircd/m_nick.c (ms_nick): document protocol change
2917 * ircd/gline.c: support GLINE_LASTMOD
2919 * include/s_user.h: add struct Gline * argument to register_user
2921 * include/gline.h: add GLINE_LASTMOD to look up non-zero lastmods
2923 * ircd/s_conf.c (find_kill): add unsigned int argument to
2926 * ircd/gline.c: add GLINE_GLOBAL to lookup or find only global
2927 glines; add unsigned int argument to gline_lookup()
2929 * include/gline.h: add GLINE_GLOBAL flag; add unsigned int
2930 argument to gline_lookup()
2932 * ircd/m_server.c: Resend jupe only when there is no %<lastmod>
2933 parameter, or when it falls out of bounds: see comments prior to
2934 call to jupe_resend(); call server_estab with struct Jupe
2935 parameter, so that we place the appropriate %<lastmod> in the
2938 * ircd/s_serv.c (server_estab): send %<lastmod> for introduced
2939 server, as well as for servers when we're sending the BURST
2941 * include/s_serv.h: add a struct Jupe * to the arguments for
2942 server_estab() so that we can send the appropriate lastmod
2945 * ircd/m_gline.c (ms_gline): actually, this should be the
2946 slightest bit more efficient...
2948 * ircd/m_jupe.c (ms_jupe): actually, this should be the slightest
2949 bit more efficient...
2951 * ircd/m_gline.c (ms_gline): inhibit GLINE processing resends
2954 * ircd/m_jupe.c (ms_jupe): inhibit JUPE processing resends during
2957 * ircd/channel.c (joinbuf_join): really remove user from local
2960 2000-05-29 Perry Lorier <Isomer@coders.net>
2961 * ircd/m_names.c: Removed redundant space.
2962 * ircd/s_bsd.c: Fixed incorrect syntax on ERROR line.
2964 2000-05-18 Kevin L. Mitchell <klmitch@mit.edu>
2966 * ircd/m_burst.c (ms_burst): er...that should have been a ",", not
2969 2000-05-04 Kevin L. Mitchell <klmitch@mit.edu>
2971 * ircd/channel.c: replace bogus assertions with returns, which is
2972 logically correct; only wipe out limit/key if they were originally
2973 set in the first place; remove user from channel when doing a
2974 PARTALL; only send MODE +o for user CREATEing channel if user is
2975 not MyUser--CREATE will only be used if the channel did not
2976 originally exist, therefore we can assume no one local is on the
2977 channel anyway, and we don't exactly need for the user to see an
2978 explicit +o for themselves
2980 * doc/readme.gline: describe the syntax of the GLINE command
2982 * doc/readme.jupe: update to reflect a couple of changes to JUPE
2984 * ircd/gline.c: don't propagate local changes
2986 * ircd/jupe.c: don't propagate local changes
2988 * ircd/m_gline.c (mo_gline): force local flag when deactivating
2989 glines with 0 lastmod
2991 * ircd/gline.c (gline_deactivate): G-lines with zero lastmod time
2992 are now removed instead of being deactivated
2994 * ircd/m_gline.c (ms_gline): make G-lines of the form "GLINE *
2995 -<mask>" be accepted
2997 * ircd/channel.c (send_channel_modes): deal with one of the last
3000 * ircd/m_burst.c (ms_burst): debugged ban processing; removed
3003 * ircd/channel.c (modebuf_extract): remove debugging
3004 sendto_opmask_butone calls
3006 2000-05-03 Kevin L. Mitchell <klmitch@mit.edu>
3008 * ircd/channel.c: support a couple of new flags to support using
3009 mode_parse; fix some bugs with 0 struct ModeBuf *; implementation
3010 of modebuf_extract to extract added flags for use by ms_burst
3012 * include/channel.h: a couple of new flags to support using
3013 mode_parse inside ms_burst
3015 * ircd/m_burst.c (ms_burst): brand new implementation of BURST
3017 * ircd/m_endburst.c: add loop to processing of end_of_burst to
3018 free empty channels after the BURST is over.
3020 * ircd/m_server.c: convert to use new send.c functions--I wanted
3021 to rewrite it from scratch, but the logic's pretty complex; I may
3022 still rewrite it, though...
3024 2000-05-02 Thomas Helvey <tomh@inxpress.net>
3026 * ircd/ircd.c: fix broken header include ordering
3028 2000-05-02 Thomas Helvey <tomh@inxpress.net>
3030 * ircd/IPcheck.c: cleanups for ZenShadow's cleanups
3031 review emailed privately
3033 * include/IPcheck.h: removed unneeded include
3035 2000-05-02 Kevin L. Mitchell <klmitch@mit.edu>
3037 * ircd/s_user.c (hunt_server): throw in a comment so I know what
3038 the sendto_one is for
3040 * include/querycmds.h (Count_unknownbecomesclient): convert to
3041 sendto_opmask_butone
3043 * ircd/send.c: start removing dead code
3045 * include/send.h: start removing dead code
3047 * ircd/m_rping.c: convert to sendcmdto_one / send_reply /
3050 * ircd/m_rpong.c: convert to sendcmdto_one / send_reply
3052 2000-05-01 Kevin L. Mitchell <klmitch@mit.edu>
3054 * ircd/m_stats.c: convert to sendcmdto_one / send_reply
3056 * ircd/m_kick.c: Completely reimplement m_kick
3058 * ircd/channel.c: send_user_joins removed; it was dead code,
3061 2000-05-01 Perry Lorier <isomer@coders.net>
3062 * ircd/m_invite.c: Fix for the rest of m_invite.c, and again.
3063 * ircd/channels.c: My fix for the part problem. Untested, probably
3064 won't work. Can't be much worse than the current problem.
3065 it'll either work or core, take your pick.
3068 2000-04-30 Perry Lorier <isomer@coders.net>
3069 * config/config-sh.in: Fix for CONNEXIT
3070 * ircd/s_{user,misc}.c: Fix for CONNEXIT
3071 * ircd/m_invite.c: Fix for incorrectly numnickified invite.
3072 (Kev: Want to come talk to me about this?)
3074 2000-04-30 Steven M. Doyle <steven@doyle.net>
3076 - general cleanups and readability enhancements
3077 - rewrite of setuid/chroot code.
3078 - server will no longer run as root
3079 - -DPROFIL compile option removed
3080 - Fixed IPcheck API calls
3082 * config/config-sh.in
3083 - Fixed up chroot compile options
3084 - Added options for debug and profile compiles
3086 * config/gen.ircd.Makefile
3087 - Support for new debug/profile options
3090 - Support for new debug/profile options
3092 * ircd/ircd_signal.c
3096 - Removed old API prototypes, added new ones
3099 - Readability cleanups (well, I -think-...)
3100 - Changed IPRegistryEntry.last_connect to a time_t. The previously
3101 used unsigned short was probably causing interesting things after
3102 a client had been connected longer than about 65,535 seconds...
3103 - Removed old API functions.
3106 - Removed IPcheck.h include
3108 * Additionally modified IPcheck API calls in:
3118 2000-04-30 Perry Lorier <isomer@coders.net>
3119 * ircd/s_bsd.c: Sigh. :)
3120 * ircd/m_mode.c: fix for modeless channels by poptix.
3122 2000-04-29 Kevin L. Mitchell <klmitch@mit.edu>
3124 * ircd/m_join.c: reimplement JOIN in terms of struct JoinBuf
3126 * ircd/channel.c (clean_channelname): make clean_channelname also
3127 truncate long channel names
3129 2000-04-28 Kevin L. Mitchell <klmitch@mit.edu>
3131 * ircd/m_create.c: reimplement CREATE in terms of struct JoinBuf
3133 * ircd/channel.c: implemented joinbuf_init, joinbuf_join,
3136 * include/channel.h: definitions and declarations for the struct
3139 2000-04-29 Perry Lorier <isomer@coders.net>
3140 * ircd/s_bsd.c: Ok, so I thought I compiled and tested this...
3142 2000-04-29 Perry Lorier <isomer@coders.net>
3143 * ircd/s_bsd.c: Add debugging code to IPcheck
3145 2000-04-28 Kevin L. Mitchell <klmitch@mit.edu>
3147 * include/ircd_reply.h (SND_EXPLICIT): use instead of RPL_EXPLICIT
3149 * ircd/ircd_reply.c (send_reply): use SND_EXPLICIT instead of
3152 * ircd/m_userhost.c (m_userhost): add a dead code comment
3154 * ircd/m_desynch.c: forgot one...
3156 * ircd/m_rehash.c (mo_rehash): er, duplicates :)
3158 * ircd/m_proto.c (proto_send_supported): just change a comment so
3159 it doesn't show up in my scans
3161 * ircd/ircd_reply.c (send_reply): fix a slight bug...
3163 * ircd/s_numeric.c (do_numeric): use new sendcmdto_* functions,
3166 * ircd/parse.c (parse_server): argument wrangling to make
3167 processing in do_numeric a little easier to deal with
3169 * ircd/s_serv.c (server_estab): SERVER should come from
3170 acptr->serv->up, not &me
3172 * ircd/m_lusers.c: accidentally left out sptr for a %C
3174 * ircd/send.c: hack to support doing wallchops...
3176 * ircd/m_whowas.c: convert to new send functions
3178 * ircd/m_whois.c: convert to new send functions
3180 * ircd/m_who.c: convert to new send functions
3182 * ircd/m_wallops.c: convert to new send functions
3184 * ircd/m_wallchops.c: convert to new send functions
3186 * ircd/m_version.c: convert to new send functions
3188 * ircd/m_userip.c: convert to new send functions
3190 * ircd/m_userhost.c: convert to new send functions
3192 * ircd/m_uping.c: convert to new send functions
3194 * ircd/m_trace.c: convert to new send functions
3196 * ircd/m_topic.c: convert to new send functions
3198 * ircd/m_time.c: convert to new send functions
3200 * ircd/m_squit.c: convert to new send functions
3202 * ircd/m_silence.c: convert to new send functions
3204 * ircd/m_settime.c: convert to new send functions
3206 * ircd/m_restart.c: convert to new send functions
3208 * ircd/m_rehash.c: convert to new send functions
3210 * ircd/m_privmsg.c: convert to new send functions
3212 * ircd/m_pong.c: convert to new send functions
3214 * ircd/m_ping.c: convert to new send functions
3216 * ircd/m_pass.c: convert to new send functions
3218 * ircd/m_opmode.c: convert to new send functions
3220 * ircd/m_oper.c: convert to new send functions
3222 * ircd/m_notice.c: convert to new send functions
3224 * ircd/m_nick.c: convert to new send functions
3226 * ircd/m_names.c: convert to new send functions
3228 * ircd/m_motd.c: convert to new send functions
3230 * ircd/m_mode.c: convert to new send functions
3232 * ircd/m_map.c: convert to new send functions
3234 * ircd/m_lusers.c: convert to new send functions
3236 * ircd/m_list.c: convert to new send functions
3238 * ircd/m_links.c: convert to new send functions
3240 * ircd/m_kill.c: convert to new send functions
3242 * ircd/m_jupe.c: convert to new send functions
3244 * ircd/m_invite.c: convert to new send functions
3246 * ircd/m_info.c: convert to new send functions
3248 * ircd/m_help.c: convert to new send functions
3250 * ircd/m_gline.c: convert to new send functions
3252 * ircd/m_error.c: convert to new send functions
3254 * ircd/m_endburst.c: convert to new send functions
3256 * ircd/m_die.c: convert to new send functions
3258 * ircd/m_destruct.c: convert to new send functions
3260 * ircd/m_defaults.c: convert to new send functions
3262 * ircd/m_connect.c: convert to new send functions
3264 2000-04-28 Perry Lorier <isomer@coders.net>
3265 * RELEASE.NOTES: Describe a few more undocumented features.
3266 * config/config-sh.in: change the default paths for logging
3267 and the recommended number of channels.
3268 * include/supported.h: Rearrange slightly, added CHANTYPE's
3270 2000-04-27 Kevin L. Mitchell <klmitch@mit.edu>
3272 * ircd/m_close.c: convert to send_reply
3274 * ircd/m_clearmode.c: convert to send_reply, sendcmdto_serv_butone
3276 * ircd/m_away.c: convert to send_reply and sendcmdto_serv_butone
3278 * ircd/m_admin.c: convert to send_reply and hunt_server_cmd
3280 * ircd/s_user.c (hunt_server_cmd): new hunt_server replacement
3281 that takes cmd and tok arguments, etc. NOTE: THIS IMPLEMENTATION
3282 HAS A MAJOR HACK!!! The whole hunt_server architecture should be
3283 carefully rethought...
3285 * ircd/s_stats.c (hunt_stats): use new hunt_server_cmd
3287 * include/s_user.h: hunt_server_cmd -- replacement for hunt_server
3289 * ircd/s_misc.c: *sigh* 2.10.10 doesn't support squitting by
3290 numeric nick; therefore, we have to use the server name
3292 * ircd/m_squit.c (ms_squit): allow to squit by server numeric nick
3294 * ircd/send.c: fix minor bugs
3296 * ircd/s_user.c (check_target_limit): mark dead code so I filter
3299 * ircd/s_serv.c (exit_new_server): mark dead code so I filter it
3302 * ircd/parse.c: mark dead code so I filter it when I grep
3304 * ircd/map.c: mark dead code so I filter it when I grep
3306 * ircd/ircd.c: mark dead code so I filter it when I grep
3308 * ircd/ircd_relay.c: convert over to new sendcmdto_*, send_reply
3311 * ircd/channel.c: mark dead code so I filter it when I grep
3313 * ircd/s_stats.c: use send_reply instead of sendto_one w/rpl_str;
3314 hope I'm not stepping on toes...
3316 * ircd/s_conf.c: more sendto_opmask_butone / send_reply
3317 conversions; use ircd_snprintf in a couple of cases to negate the
3318 possibility of buffer overflow
3320 2000-04-26 Kevin L. Mitchell <klmitch@mit.edu>
3322 * ircd/channel.c: convert as much as possible to new send
3325 * ircd/send.c (sendcmdto_common_channels): fix a subtle bug --
3326 test member->user->from->fd, not from->fd
3328 * ircd/gline.c (gline_add): go ahead and add badchans; we just
3329 won't look for them in m_gline; this way, they always work...
3331 * ircd/jupe.c: use ircd_vsnprintf conversion specifiers
3333 * ircd/gline.c: since write_log now uses ircd_vsnprintf, use
3334 ircd_vsnprintf conversion specifiers
3336 * ircd/support.c (write_log): use ircd_vsnprintf for write_log, so
3337 I have my conversion specifiers
3339 * ircd/gline.c (do_gline): use send_reply for ERR_YOUREBANNEDCREEP
3341 * ircd/send.c (sendcmdto_flag_butone): explicitly send WALLOPS to
3344 * ircd/s_serv.c (exit_new_server): rewrite exit_new_server to be a
3345 little less brain-dead
3347 * ircd/s_misc.c: use sendcmdto_one, sendrawto_one, and send_reply
3349 * ircd/s_debug.c: use send_reply with RPL_EXPLICIT for
3352 * ircd/res.c (cres_mem): use send_reply with RPL_EXPLICIT for
3355 * ircd/list.c (send_listinfo): use send_reply with RPL_EXPLICIT
3358 * ircd/m_pong.c: use RPL_EXPLICIT for ERR_BADPING
3360 * ircd/ircd.c: use RPL_EXPLICIT for ERR_BADPING
3362 * ircd/s_user.c (register_user): use RPL_EXPLICIT for
3365 * ircd/ircd_reply.c (send_reply): support RPL_EXPLICIT
3367 * include/ircd_reply.h (RPL_EXPLICIT): somewhat of a hack to mark
3368 a numeric as needing to use an explicit pattern, which will be the
3369 first argument in the variable argument list
3371 * ircd/s_user.c: use sendrawto_one instead of sendto_one to send
3372 non-prefixed nospoof PING
3374 * ircd/s_bsd.c: use sendrawto_one instead of sendto_one to send
3375 non-prefixed SERVER login
3377 * ircd/ircd.c (check_pings): fix last sendto_one calls (except for
3378 a numeric usage further up)
3380 * include/send.h: declare sendrawto_one
3382 * ircd/send.c (sendrawto_one): new function to use ONLY for
3383 non-prefixed commands, like PING to client, or PASS/SERVER on
3386 2000-04-25 Kevin L. Mitchell <klmitch@mit.edu>
3388 * ircd/ircd_snprintf.c (doprintf): implement %H for possible
3389 future expansion (channel numerics?)
3391 * include/ircd_snprintf.h: added documentation to # to explain use
3392 with %C; added documentation for : to explain use with %C; added
3393 documentation for %H for channels
3395 * ircd/whocmds.c: use send_reply
3397 * ircd/userload.c: use sendcmdto_one
3399 * ircd/uping.c: use sendcmdto_one
3401 * ircd/send.c: use new flags to %C format string; ':' prefixes
3402 client name with a colon for local connects, '#' uses
3403 nick!user@host form for local connects
3405 * ircd/s_user.c: use send_reply, sendto_opmask_butone,
3406 sendcmdto_one, sendcmdto_serv_butone, sendcmdto_flag_butone
3408 * ircd/s_serv.c: use sendcmdto_one, sendto_opmask_butone
3410 * ircd/s_bsd.c: use sendto_opmask_butone, send_reply,
3413 * ircd/s_auth.c: use sendto_opmask_butone
3415 * ircd/res.c: use sendcmdto_one
3417 * ircd/ircd_snprintf.c (doprintf): minor bug fixes and some
3418 debugging assertions
3420 2000-04-24 Kevin L. Mitchell <klmitch@mit.edu>
3422 * ircd/support.c: dumpcore is no longer used, so get rid of it
3424 * ircd/parse.c: use send_reply, sendcmdto_one
3426 * ircd/map.c: use send_reply
3428 * ircd/listener.c: use send_reply
3430 * ircd/jupe.c: use sendto_opmask_butone, send_reply
3432 * ircd/ircd_reply.c: use send_reply
3434 * ircd/ircd.c: use sendto_opmask_butone
3436 * ircd/gline.c: use sendto_opmask_butone, send_reply
3438 * ircd/ircd_snprintf.c (doprintf): make it deal with incompletely
3439 registered clients; make FLAG_ALT print nick!user@host; make
3440 FLAG_COLON print :blah
3442 * ircd/class.c (report_classes): use send_reply instead of
3445 * ircd/hash.c (m_hash): replace sendto_one with sendcmdto_one
3447 * ircd/IPcheck.c (ip_registry_connect_succeeded): replace
3448 sendto_one with sendcmdto_one
3450 2000-04-21 Kevin L. Mitchell <klmitch@mit.edu>
3452 * ircd/send.c: clean up logic in sendcmdto_channel_butone; use
3453 MyConnect() instead of IsServer() in sendcmdto_flag_butone; define
3454 sendcmdto_match_butone
3456 * include/send.h: declare sendcmdto_match_butone
3458 2000-04-20 Kevin L. Mitchell <klmitch@mit.edu>
3460 * ircd/jupe.c: update to use send_reply()
3462 * ircd/gline.c: update to use send_reply()
3464 * include/ircd_reply.h: declare send_reply
3466 * ircd/ircd_reply.c (send_reply): send_error_to_client, but for
3467 replies; uses ircd_snprintf
3469 * ircd/send.c: added comments to redirect searchers to appropriate
3470 sendcmdto_* function; moved new functions to end of file; added
3471 explanatory comments; reordered arguments; defined new functions
3474 * ircd/m_jupe.c: reorder arguments to sendcmdto_* functions
3476 * ircd/m_gline.c: reorder arguments to sendcmdto_* functions
3478 * ircd/jupe.c: reorder arguments to sendcmdto_* functions
3480 * ircd/gline.c: reorder arguments to sendcmdto_* functions
3482 * include/send.h: reorder arguments, add explanatory comments,
3483 declare new functions sendcmdto_flag_butone, sendto_opmask_butone,
3484 and vsendto_opmask_butone
3486 2000-04-19 Kevin L. Mitchell <klmitch@mit.edu>
3488 * ircd/send.c: define sendcmdto_channel_butone, wrote a simplified
3489 vsendto_op_mask that uses '*' instead of the receiving client
3492 * include/send.h: declare sendcmdto_channel_butone; takes a skip
3493 argument that allows you to skip (or not to skip) deaf users,
3494 users behind bursting servers, and non channel operators
3496 2000-04-17 Kevin L. Mitchell <klmitch@mit.edu>
3498 * ircd/send.c: new sendcmdto_channel_butserv -- note that old
3499 sendto_channel_butserv has a subtle bug; also wrote
3500 sendcmdto_common_channels.
3502 * include/send.h: declare new sendcmdto_* functions
3504 * ircd/jupe.c: support local deactivations of jupes
3506 * ircd/gline.c: support local deactivations of glines
3508 * include/jupe.h: JUPE_LDEACT allows jupes to be locally
3509 deactivated; if they aren't locally deactivated, then it slaves to
3510 the net-wide activation status; JupeIsRemActive() tests only
3511 whether the jupe is active everywhere else
3513 * include/gline.h: GLINE_LDEACT allows glines to be locally
3514 deactivated; if they aren't locally deactivated, then it slaves to
3515 the net-wide activation status; GlineIsRemActive() tests only
3516 whether the gline is active everywhere else
3518 * ircd/gline.c: detect overlapping G-lines; if an existing, wider
3519 gline expires after the new one will, we drop the new one,
3520 otherwise we add the G-line after that one (so the wide one will
3521 apply first); if the new one contains an existing G-line and if it
3522 will expire after the existing one, we drop the existing one to
3525 * ircd/m_gline.c (mo_gline): opers could issue remote local
3526 glines when CONFIG_OPERCMDS was off; fixed
3528 2000-04-16 Kevin L. Mitchell <klmitch@mit.edu>
3530 * ircd/m_jupe.c (mo_jupe): allow target argument to be dropped if
3531 this is a local JUPE
3533 * ircd/gline.c: add flags argument to gline_activate and
3534 gline_deactivate for future expansion
3536 * ircd/m_gline.c: pass flags to gline_activate and
3539 * include/gline.h: add flags argument to gline_activate and
3542 * ircd/jupe.c: add flags argument to jupe_activate and
3543 jupe_deactivate for future expansion
3545 * include/jupe.h: add flags argument to jupe_activate and
3548 * ircd/m_jupe.c: pass a flags argument to jupe_add instead of
3549 local, active; pass flags to jupe_activate and jupe_deactivate
3551 * include/gline.h: remove dead code
3553 * ircd/gline.c: make gline expire times relative to CurrentTime,
3554 since that should be monotonically increasing, instead of
3555 TStime(), which can be set backwards, and which can therefore
3556 cause an expire time to increase; make local glines be removed
3557 instead of just deactivated; don't let gline_find() look for
3558 user@host glines if the mask being looked up is a channel mask
3560 * ircd/send.c (vsendcmdto_one): forgot to account for the case
3561 where origin is a server and destination is a user
3563 * ircd/jupe.c: make jupe expire times relative to CurrentTime,
3564 since that should be monotonically increasing, instead of
3565 TStime(), which can be set backwards, and which can therefore
3566 cause an expire time to increase; make local jupes be removed
3567 instead of just deactivated
3569 * ircd/ircd_snprintf.c: d'oh, thanks for catching that; short for
3570 limit is fine. any other warnings I should know about?
3572 2000-04-15 Thomas Helvey <tomh@inxpress.net>
3574 * ircd/*.c: const correctness and type safety cleanups to
3575 get code to compile with C++ compiler. Still has
3576 signed/unsigned comparison warnings.
3578 2000-04-15 Greg Sikorski <gte@atomicrevs.demon.co.uk>
3580 * ircd/userload.c: change <sys/time.h> include to <time.h> for
3583 2000-04-14 Kevin L. Mitchell <klmitch@mit.edu>
3585 * ircd/m_gline.c (mo_gline): d'oh, target isn't a numeric; use %C
3586 and convert acptr...
3588 * ircd/s_user.c: move gline_lookup function call into
3589 register_user, where it'll have a username to lookup!
3591 * ircd/m_gline.c: modify to utilize new sendcmdto_* series of
3592 functions; also stuff send_error_to_client into return clauses
3594 * ircd/m_jupe.c: modify to utilize new sendcmdto_* series of
3595 functions; also use send_error_to_client where that makes sense
3597 * ircd/jupe.c: modify to utilize new sendcmdto_* series of
3598 functions; also use send_error_to_client where that makes sense
3600 * ircd/gline.c: modify to utilize new sendcmdto_* series of
3601 functions; also fix gline_lookup() to deal properly with remote
3602 clients--boy, do struct Client and struct User need to be cleaned
3605 * ircd/ircd_snprintf.c (doprintf): a dest of &me is a server,
3608 * ircd/send.c: wrote sendcmdto_one(), vsendcmdto_one(), and
3609 sendcmdto_serv_butone(), all utilizing the %v conversion of
3612 * include/send.h: define IRC_BUFSIZE, max size of a message;
3613 declare sendcmdto_one(), vsendcmdto_one(), and
3614 sendcmdto_serv_butone()
3616 * include/msg.h: define all the CMD_* constants needed to utilize
3617 the new sendcmdto_* series of functions
3619 * ircd/Makefile.in (SRC): list ircd_snprintf.c; run make depend
3621 * ircd/gline.c: remove old, dead code.
3623 * ircd/m_gline.c (mo_gline): disallow setting of global G-lines
3624 unless CONFIG_OPERCMDS is enabled; disallow listing of all G-lines
3625 (don't advertise proxies); remove dead code
3627 * ircd/parse.c: oper handler for JUPE only lists jupes unless
3628 CONFIG_OPERCMDS is enabled
3630 * ircd/m_jupe.c (mo_jupe): don't compile mo_jupe() if
3631 CONFIG_OPERCMDS is not enabled; we'll disable it in parse.c
3633 * ircd/m_opmode.c (mo_opmode): if CONFIG_OPERCMDS is not enabled,
3634 always return ERR_DISABLED
3636 * ircd/m_clearmode.c (mo_clearmode): if CONFIG_OPERCMDS is not
3637 enabled, always return ERR_DISABLED
3639 * ircd/s_err.c: add error message to indicate disabled commands
3641 * include/numeric.h (ERR_DISABLED): to indicate disabled commands
3643 * doc/Configure.help: add documentation for CONFIG_OPERCMDS
3645 * config/config-sh.in: add CONFIG_OPERCMDS, default both it and
3646 CONFIG_NEW_MODE to 'y' for now
3648 * ircd/gline.c (gline_list): fix a minor formatting bogon
3650 * BUGS: since I fixed that bug, might as well mark it fixed.
3652 * ircd/m_join.c: look up badchans with GLINE_EXACT
3654 * ircd/m_gline.c: fix parc count problems; look up existing
3655 G-lines with GLINE_EXACT; only set new lastmod when
3656 activating/deactivating existing glines if old lastmod was not 0
3658 * ircd/gline.c: forgot to copy the gline reason over; don't
3659 propagate a gline with 0 lastmod if origin is user; add
3660 GLINE_EXACT to force exact matching of gline mask
3662 * ircd/ircd_snprintf.c (doprintf): forgot to deal with the zero
3665 * ircd/s_conf.c (find_kill): gline_find() takes a char *userhost,
3666 but gline_lookup() actually takes a client--d'oh.
3668 2000-04-13 Thomas Helvey <tomh@inxpress.net>
3669 * ircd/IPcheck.c: Back port BLMet's bugfix from 2.10.10
3671 2000-04-13 Greg Sikorski <gte@atomicrevs.demon.co.uk>
3673 * ircd/whocmds.c: Don't make idle flag default in /who, to prevent:
3675 "Gte3 H*iwg Gte@212.49.240.217 :1 :0 I am the one that was."
3678 * ircd/whocmds.c: Change idle time calc from socket idle to user
3681 2000-04-13 Kevin L. Mitchell <klmitch@mit.edu>
3683 * config/aclocal.m4 (unet_CHECK_TYPE_SIZES): check size of void *,
3684 too, for ircd_snprintf.c
3686 * include/ircd_snprintf.h: documentation for ircd_(v)snprintf, in
3687 comments; mostly descended from the Linux manpage for printf, but
3688 also documenting the extensions.
3690 * ircd/ircd_snprintf.c: NULL dest is equivalent to going to a
3691 client; make 'q' be the same as 'L'; remove __inline__; only
3692 define EXTENSION if HAVE_LONG_LONG is defined
3694 * include/handlers.h: declare m_gline()
3696 * ircd/parse.c: gline can be called by users, but it only lists
3699 * ircd/s_user.c (set_nick_name): resend gline if a remote server
3700 introduces a glined client
3702 * ircd/s_serv.c (server_estab): burst glines, too
3704 * ircd/gline.c: fix up all the expire times to be offsets;
3705 simplify gline_resend()
3707 * ircd/m_gline.c: begin coding replacements for ms_gline(),
3708 mo_gline(), and m_gline()
3710 * ircd/gline.c (gline_add): allow *@#channel to work correctly;
3711 also, prohibit local BADCHANs if LOCAL_BADCHAN not defined
3713 2000-04-13 Greg Sikorski <gte@atomicrevs.demon.co.uk>
3715 * tools/Bouncer/*: Add comments/documentation/tags.
3716 * tools/Bouncer/*: Add debug defines, make task fork().
3718 2000-04-12 Thomas Helvey <tomh@inxpress.net>
3719 * ircd/s_err.c: Cleanup s_err.c make one table so we
3720 don't have to do anything tricky to get an error string.
3722 2000-04-12 Greg Sikorski <gte@atomicrevs.demon.co.uk>
3723 * Add port bouncer for http (x/w)
3725 2000-04-12 Kevin L. Mitchell <klmitch@mit.edu>
3727 * ircd/s_conf.c (find_kill): replaced call to find_gline() with a
3728 call to gline_find(); also used GlineReason() instead of direct
3729 reference to structure member
3731 * ircd/m_join.c (m_join): replace bad_channel() calls with calls
3732 to gline_find(name, GLINE_BADCHAN), and also check to see if gline
3735 * ircd/channel.c: nothing seems to be called anywhere...
3737 * ircd/s_err.c: update a couple of replies to dovetail with new
3740 * ircd/gline.c: begin complete re-implementation of gline.c along
3741 the lines of the final design of jupe.c
3743 * include/gline.h: begin complete re-implementation of gline.c
3744 along the lines of the final design of jupe.c
3746 * ircd/channel.c (mode_process_clients): fix "Deop of +k user on
3747 %s by %s" message...
3749 * ircd/ircd_snprintf.c: my new snprintf()-like functions
3751 * include/ircd_snprintf.h: my new snprintf()-like functions
3753 2000-04-11 Thomas Helvey <tomh@inxpress.net>
3754 * ircd/IPcheck.c: removed old dead code
3755 * ircd/s_user.c (send_user_info): removed non-standard
3756 user not found message for userhost/userip
3758 2000-04-11 Greg Sikorski <gte@atomicrevs.demon.co.uk>
3760 * ircd/s_err.c: Added missing quotes to ERR_DONTCHEAT numeric.
3761 * doc/p10.html: Work on chapter 4.
3763 2000-04-10 Kevin L. Mitchell <klmitch@mit.edu>
3765 * ircd/channel.c (mode_parse_client): fix coredump on /mode
3766 #foobar +o nosuchnick
3768 2000-04-10 Perry Lorier <Isomer@coders.net>
3771 2000-04-09 Thomas Helvey <tomh@inxpress.net>
3772 * include/IPcheck.h: fix prototype
3773 * ircd/s_user.c: fix usage of IPcheck_remote_connect
3774 * ircd/IPcheck.c: removed unused args
3776 2000-04-09 Thomas Helvey <tomh@inxpress.net>
3777 * include/IPcheck.h: add proto for IPcheck_expire
3779 * ircd/IPcheck.c: Rewrote
3781 * ircd/ircd.c: Add IPcheck_expire to main message loop
3783 * ircd/s_user.c: Redo target hashing, refactor target code
3785 * include/numeric.h: Cleaned up numerics, added which ones are
3786 in use by other networks and what they are in use for.
3788 * ircd/channel.c: cleaned can_join(), allow anyone through anything
3789 if /invited, simplified the function. Opers overusing OPEROVERRIDE
3790 will get a message explaining to them not to cheat.
3792 * ircd/m_join.c: cleaned up the various join functions, should be
3793 a lot more efficient. Still needs work. Now assumes that s<->s
3794 won't send it a JOIN 0. Service coders - note this and tread with
3797 * ircd/m_stats.c: added Gte-'s stats doc patch.
3799 * ircd/m_version.c: /version now returns the 005 numeric as well.
3800 as requested by Liandrin.
3803 2000-04-07 Kevin L. Mitchell <klmitch@mit.edu>
3805 * ircd/m_clearmode.c: add include for support.h for write_log()
3807 * configure: move ircd/crypt/* to tools/*
3809 2000-04-06 Thomas Helvey <tomh@inxpress.net>
3810 * ircd/s_auth.c: Shorten auth connect timeout to 60 seconds
3811 set client host to server alias if connection from localhost
3813 2000-04-06 Perry Lorier <isomer@coders.net>
3814 * ircd/ircd.c: Fix core during pinging (oops)
3816 2000-04-06 Perry Lorier <isomer@coders.net>
3817 * ircd/send.c: fixed wrong ident being sent to channels bug.
3818 * include/numerics.h: Updated some of the numerics from other
3819 networks. Flagged some as 'unused' by undernet.
3821 2000-03-30 Perry Lorier <isomer@coders.net>
3822 * ircd/ircd.c: Lets see if this helps the ping problem at all.
3823 * ircd/whocmds.c, /doc/readme.who: Added %l specifier to get idle
3824 time for local clients. (as requested), extended who now returns all
3825 the flags (@+!) so you can tell the complete state of a client.
3827 2000-03-30 Thomas Helvey <tomh@inxpress.net>
3828 * m_rping.c m_rpong.c: add Gte's rping/rpong fixes
3830 2000-03-30 Perry Lorier <isomer@coders.net>
3831 * ircd/parse.c: oops, missed opers.
3833 2000-03-30 Perry Lorier <isomer@coders.net>
3834 * ircd/parse.c: fixed mystifying ping bug thats been plaguing us
3835 for so long. Remember: m_ping MUST be in the parse array. :)
3837 2000-03-30 Perry Lorier <isomer@coders.net>
3838 * ircd/ircd.c: test in check_pings was wrong. I move that we
3839 disallow cvs commit after 10pm localtime....
3841 2000-03-30 Perry Lorier <isomer@coders.net>
3842 * ircd/m_pong.c: Fix it for servers too.
3844 2000-03-30 Perry Lorier <isomer@coders.net>
3845 * ircd/m_pong.c: Fix ping timeout bugs
3847 2000-03-30 Perry Lorier <isomer@coders.net>
3848 * ircd/channel.c: Bans had CurrentTime in their when field instead
3851 2000-03-31 Thomas Helvey <tomh@ixpress.net>
3852 * ircd/numnicks.c (SetXYYCapacity): fix for extended
3855 2000-03-30 Perry Lorier <isomer@coders.net>
3856 * ircd/m_nick.c: send kills both ways so when we add nick change
3857 on collision we don't desync the network.
3859 * ircd/map.c: Fixup the map a bit more.
3861 2000-03-31 Kevin L. Mitchell <klmitch@mit.edu>
3863 * ircd/m_clearmode.c (do_clearmode): Log the CLEARMODE to OPATH
3865 * ircd/m_opmode.c: Log the mode changes to OPATH
3867 * ircd/channel.c (modebuf_flush_int): Log the mode changes to
3870 * include/channel.h (MODEBUF_DEST_LOG): Log the mode changes to
3873 * doc/Configure.help: help text for CONFIG_LOG_OPMODE / OPATH
3875 * config/config-sh.in: added OPATH for opmode log file
3877 * ircd/m_clearmode.c (do_clearmode): updated uses of
3878 modebuf_mode_string() for the new usage
3880 * ircd/channel.c: added flag MODE_FREE and an int argument to
3881 modebuf_mode_string() to indicate that the string must be free'd;
3882 updated calls to modebuf_mode_string() for the new usage; called
3883 collapse(pretty_mask()) on the ban string and use allocated memory
3884 for it; added ban list length accounting; fixed a number of small
3885 bugs in ban processing
3887 * include/channel.h: added flag MODE_FREE and an int argument to
3888 modebuf_mode_string() to indicate that the string must be free'd
3890 * ircd/m_clearmode.c (do_clearmode): made sure clearmode removed
3891 keys and limits that are set
3893 2000-03-30 Perry Lorier <isomer@coders.net>
3894 * ircd/ircd.c: rewrote check_pings() for maintainability
3895 and speed. Also changed quit msg's so they don't have
3896 redundant nick[host] info in them.
3898 * ircd/send.c: Changed write errors to report what error
3899 occured (if possible).
3901 * ircd/gline.c: added gline comment to the quit.
3903 * ircd/m_server.c: Added suggestions to server quits mentioning
3904 what went wrong so the admin can fix it earlier instead of asking
3907 * ircd/map.c: Changed m_map() to hide numerics, show a * beside
3908 servers that aren't fully burst yet. And show '(--s)' for servers
3911 * doc/example.conf: Fixed wrapped U:
3913 2000-03-30 Kevin L. Mitchell <klmitch@mit.edu>
3915 * ircd/m_mode.c (ms_mode): implemented a new m_mode in terms of
3916 mode_parse() (version selectable at compile time)
3918 * ircd/m_clearmode.c (mo_clearmode): clean_channelname(parv[1])
3920 * ircd/m_opmode.c (mo_opmode): clean_channelname(parv[1])
3922 * config/config-sh.in: add new config option to enable new m_mode
3925 * doc/Configure.help: add documentation for new config option
3928 * ircd/channel.c (mode_parse_client): /opmode #foobar -o -- 461
3929 MODE -v : Not enough parameters
3931 * ircd/m_clearmode.c (do_clearmode): do_clearmode() would remove
3932 +k and +l even if they weren't set...
3934 * ircd/m_opmode.c: implement the OPMODE command using mode_parse()
3936 * ircd/channel.c: make mode_process_clients() clear the DEOPPED
3937 flag; fix +s+p exclusivity; add MODE_ADD/MODE_DEL to flag list
3938 for; test the 0-th member, not the i-th member, of the client
3941 * ircd/m_clearmode.c (do_clearmode): use the new
3942 mode_invite_clear() function
3944 * ircd/channel.c: cleared up all the compile-time warnings and
3947 * include/channel.h: added declarations for mode_ban_invalidate()
3948 and mode_invite_clear()
3950 * ircd/channel.c: finished mode_parse(), then broke it up into a
3951 dozen or so helper functions to make the code easier to read
3953 2000-03-29 Thomas Helvey <tomh@inxpress.net>
3954 * ircd/ircd.c: refactor server initialization a bit, use
3955 getopt for parsing command line, refactor init_sys, main,
3958 * ircd/s_bsd.c: add functions for initialization to clean
3959 up logic a bit and remove duplicated code.
3961 * include/ircd.h: add struct for server process related
3964 2000-03-29 Kevin L. Mitchell <klmitch@mit.edu>
3966 * ircd/channel.c: initial definition of mode_parse(); flags to
3967 prevent doing the same thing multiple times; helper method
3968 send_notoper() to send a "Not oper"/"Not on channel" notice
3970 * include/channel.h: declare mode_parse() and helper flags
3972 * ircd/channel.c (modebuf_flush_int): fiddled with timestamp
3973 sending to match the current action of set_mode() closely enough
3974 that hopefully there won't be major conflicts
3976 * ircd/channel.c (modebuf_flush_int): consolidated the mode string
3977 building logic, reversed the order of the arguments to mode
3978 commands to have '-' preceed '+'
3980 2000-03-29 Thomas Helvey <tomh@inxpress.net>
3981 * ircd/s_bsd.c (add_connection): don't disable socket options
3982 let OS tune itself and allow important performance tweaks to
3985 2000-03-28 Kevin L. Mitchell <klmitch@mit.edu>
3987 * ircd/channel.c (modebuf_flush_int): use %d, not %-15d; I got
3988 confused by set_mode, which is doing some really weird logic;
3989 guess what I'm going to rewrite next? ;)
3991 2000-03-28 Kevin L. Mitchell <klmitch@emc.com>
3993 * include/channel.h: added MODE_SAVE for the bounds checking stuff
3996 * ircd/channel.c: make modebuf_flush into modebuf_flush_int and
3997 make it do bounds checking on the buffer; all modes are sent only
3998 if the all parameter is 1; modebuf_flush is the exported wrapper
4000 * include/channel.h: add BOUNCE, renumber flags to get a little
4003 * ircd/channel.c (modebuf_flush): don't overload HACK2, add
4004 BOUNCE; send DESYNCH message
4006 2000-03-27 Kevin L. Mitchell <klmitch@emc.com>
4008 * ircd/m_clearmode.c (do_clearmode): only mark the modes the
4009 channel actually has in effect for deletion
4011 * ircd/channel.c: added explanatory comments to all added
4012 functions; made flushing take place at the correct place even if
4013 the MODEBUF_DEST_DEOP flag is set; rewrote build_string() helper
4014 to bash some stupid bugs; made modebuf_flush() return if ModeBuf
4015 is empty, fixed the apparent source, removed some bogus string
4016 termination code, properly terminate the mode strings, add support
4017 for HACK2 and HACK3, made limit strings not be sent if the limit
4018 is being removed, changed where '+' and '-' come from in sent
4019 strings, added support for DEOP flag, set up bouncing code for
4022 * ircd/Makefile.in: ran make depend
4024 * include/channel.h: added new defines for future functionality,
4025 made modebuf_flush() return int so I can use tail recursion
4027 * ircd/m_clearmode.c: add msg.h to includes; other misc cleanups
4028 to make it all compile
4030 * ircd/m_opmode.c: add msg.h to includes...
4032 * ircd/m_clearmode.c: implemented mo_clearchan()/ms_clearchan()
4034 * ircd/channel.c (modebuf_flush): realized I forgot to
4035 nul-terminate addbuf/rembuf properly...
4037 * ircd/m_clearmode.c (do_clearmode): wrote do_clearmode()...
4039 * ircd/channel.c (modebuf_flush): correct sendto_server_butone to
4040 sendto_serv_butone--blah^2
4042 * ircd/send.c (sendto_serv_butone): stupid comments confused me
4044 * ircd/channel.c (modebuf_flush): if there are no mode changes to
4045 propagate, we're done...
4047 * ircd/channel.c (modebuf_flush): duh; it's sendto_server_butone,
4048 not sendto_all_butone
4050 * ircd/m_clearmode.c: define skeleton for m{o,s}_clearmode
4052 * ircd/m_opmode.c: define skeleton for m{o,s}_opmode
4054 * ircd/Makefile.in (SRC): added m_opmode() and m_clearmode() to
4057 * ircd/parse.c: added messages for opmode and clearmode
4059 * include/handlers.h: added declarations for mo_opmode(),
4060 ms_opmode(), mo_clearmode(), and ms_clearmode()
4062 * include/msg.h: define MSG_OPMODE, TOK_OPMODE, MSG_CLEARMODE, and
4065 * include/channel.h (MODEBUF_DEST_OPMODE): Define the
4066 MODEBUF_DEST_OPMODE flag
4068 * ircd/channel.c (modebuf_flush): added new flag,
4069 MODEBUF_DEST_OPMODE; causes channel MODE/HACK(4) notice to appear
4070 to originate from source's server (or source itself, if
4071 IsServer(source)); also causes a server-level MODE to be sent as
4074 * include/channel.h: defined MODEBUF_DEST_SERVER,
4077 * ircd/channel.c: Add another argument to build_string() to handle
4078 numeric nicks; implemented MODEBUF_DEST_SERVER to send MODEs to
4079 servers; implemented MODEBUF_DEST_HACK4 to cause HACK(4) notices
4082 2000-03-27 Perry Lorier <isomer@coders.net>
4084 * ircd/s_bsd.c: fixed missing 'u' typo.
4086 2000-03-26 Kevin L. Mitchell <klmitch@emc.com>
4088 * ircd/channel.c: implement modebuf_init(), _mode(), _mode_uint(),
4089 _mode_string(), _mode_client(), _flush(); also implemented a
4090 simple build_string()
4092 * include/channel.h: added definition of ModeBuf, modebuf_*
4093 manipulation functions, and a couple of helper macros
4095 2000-03-24 Thomas Helvey <tomh@inxpress.net>
4096 * numicks.c: convert extended numerics to use original mask version
4099 2000-03-23 Thomas Helvey <tomh@inxpress.net>
4100 * Merge in changes from production
4101 2000-03-22 Thomas Helvey <tomh@inxpress.net>
4102 * numicks.c: Tweak to numnick generator to reduce possibility of duplicates.
4103 * rfc1459.unet: Add Maniac's documentation for /names 0
4104 * Fix misc. jupe bugs that somehow made it into the tree
4105 * Escape /names 0 to mean /names --Maniac
4106 * Don't core when server asks for info --Maniac
4107 * Add Kev's jupe patch --Bleep
4108 * Add Maniacs squit patch --Bleep
4109 * Merge in u2_10_10_beta07 changes --Bleep
4110 * Merge in u2_10_10_beta06 changes --Bleep
4111 * Start ircu2.10.11 development, beta branch u2_10_10 --Bleep
4112 #-----------------------------------------------------------------------------