--- /dev/null
+# ircd.conf - configuration file for ircd version ircu2.10
+#
+# Last Updated: 20, March 2002.
+#
+# Written by Niels <niels@undernet.org>, based on the original example.conf,
+# server code and some real-life (ahem) experience.
+#
+# Updated and heavily modified by Braden <dbtem@yahoo.com>.
+#
+# Rewritten by A1kmm(Andrew Miller)<a1kmm@mware.virtualave.net> to support
+# the new flex/bison configuration parser.
+#
+# Thanks and credits to: Run, Trillian, Cym, Morrissey, Chaos, Flynn,
+# Xorath, WildThang, Mmmm, SeKs, Ghostwolf and
+# all other Undernet IRC Admins and Operators,
+# and programmers working on the Undernet ircd.
+#
+# This is an example of the configuration file used by the Undernet ircd.
+#
+# This document is based on a (fictious) server in Europe with a
+# connection to the Undernet IRC network. It is primarily a leaf server,
+# but if all the other hubs in Europe aren't in service, it can connect
+# to one in the US by itself.
+#
+# The configuration format consists of a number of blocks in the format
+# BlockName { setting = number; setting2 = "string"; setting3 = yes; };
+# Note that comments start from a #(hash) and go to the end of the line.
+# Whitespace(space, tab, or carriage return/linefeed) are ignored and may
+# be used to make the configuration file more readable.
+#
+# Please note that when ircd puts the configuration lines into practice,
+# it parses them exactly the other way round than they are listed here.
+# It uses the blocks in reverse order.
+#
+# This means that you should start your Client blocks with the
+# "fall through", most vanilla one, and end with the most detailed.
+#
+# There is a difference between the "hostname" and the "server name"
+# of the machine that the server is run on. For example, the host can
+# have "veer.cs.vu.nl" as FQDN, and "Amsterdam.NL.EU.undernet.org" as
+# server name.
+# A "server mask" is something like "*.EU.UnderNet.org", which is
+# matched by "Amsterdam.NL.EU.undernet.org" but not by
+# "Manhattan.KS.US.undernet.org".
+#
+# Please do NOT just rename the example.conf to ircd.conf and expect
+# it to work.
+
+
+# [General]
+#
+# First some information about the server.
+# General {
+# name = "servername";
+# vhost = "ipv4vhost";
+# vhost = "ipv6vhost";
+# description = "description";
+# numeric = numericnumber;
+# dns vhost = "ipv4vhost";
+# dns vhost = "ipv6vhost";
+# dns server = "ipaddress";
+# dns server = "ipaddress2";
+# };
+#
+# If present, <virtual host> must contain a valid address in dotted
+# quad or IPv6 numeric notation (127.0.0.1 or ::1). The address MUST
+# be the address of a physical interface on the host. This address is
+# used for outgoing connections if the Connect{} block does not
+# override it. See Port{} for listener virtual hosting. If in doubt,
+# leave it out -- or use "*", which has the same meaning as no vhost.
+#
+# You may specify both an IPv4 virtual host and an IPv6 virtual host,
+# to indicate which address should be used for outbound connections
+# of the respective type.
+#
+# Note that <server numeric> has to be unique on the network your server
+# is running on, must be between 0 and 4095, and is not updated on a rehash.
+#
+# The two DNS lines allow you to specify the local IP address to use
+# for DNS lookups ("dns vhost") and one or more DNS server addresses
+# to use. If the vhost is ambiguous for some reason, you may list
+# IPV4 and/or IPV6 between the equals sign and the address string.
+# The default DNS vhost is to let the operating system assign the
+# address, and the default DNS servers are read from /etc/resolv.conf.
+# In most cases, you do not need to specify either the dns vhost or
+# the dns server.
+General {
+ name = "London.UK.Eu.UnderNet.org";
+ description = "University of London, England";
+ numeric = 1;
+};
+
+# [Admin]
+#
+# This sets information that can be retrieved with the /ADMIN command.
+# It should contain at least an admin Email contact address.
+Admin {
+ # At most two location lines are allowed...
+ Location = "The University of London";
+ Location = "Undernet IRC server";
+ Contact = "IRC Admins <irc@london.ac.uk>";
+};
+
+# [Classes]
+#
+# All connections to the server are associated with a certain "connection
+# class", be they incoming or outgoing (initiated by the server), be they
+# clients or servers.
+#
+# Class {
+# name = "<class>";
+# pingfreq = time;
+# connectfreq = time;
+# maxlinks = number;
+# sendq = size;
+# usermode = "+i";
+# };
+#
+# For connection classes used on server links, maxlinks should be set
+# to either 0 (for hubs) or 1 (for leaf servers). Client connection
+# classes may use maxlinks between 0 and approximately 4,000,000,000.
+# maxlinks = 0 means there is no limit on the number of connections
+# using the class.
+#
+# <connect freq> applies only to servers, and specifies the frequency
+# that the server tries to autoconnect. setting this to 0 will cause
+# the server to attempt to connect repeatedly with no delay until the
+# <maximum links> condition is satisfied. This is a Bad Thing(tm).
+# Note that times can be specified as a number, or by giving something
+# like: 1 minutes 20 seconds, or 1*60+20.
+#
+# Recommended server classes:
+# All your server uplinks you are not a hub for.
+Class {
+ name = "Server";
+ pingfreq = 1 minutes 30 seconds;
+ connectfreq = 5 minutes;
+ maxlinks = 1;
+ sendq = 9000000;
+};
+# All the leaf servers you hub for.
+Class {
+ name = "LeafServer";
+ pingfreq = 1 minutes 30 seconds;
+ connectfreq = 5 minutes;
+ maxlinks = 0;
+ sendq = 9000000;
+};
+
+# Client {
+# username = "ident";
+# host = "host";
+# ip = "127.0.0.0/8";
+# password = "password";
+# class = "classname";
+# maxlinks = 3;
+# };
+#
+# Everything in a Client block is optional. If a username mask is
+# given, it must match the client's username from the IDENT protocol.
+# If a host mask is given, the client's hostname must resolve and
+# match the host mask. If a CIDR-style IP mask is given, the client
+# must have an IP matching that range. If maxlinks is given, it is
+# limits the number of matching clients allowed from a particular IP
+# address.
+#
+# Take the following class blocks only as a guide.
+Class {
+ name = "Local";
+ pingfreq = 1 minutes 30 seconds;
+ sendq = 160000;
+ maxlinks = 100;
+ usermode = "+iw";
+};
+Class {
+ name = "America";
+ pingfreq = 1 minutes 30 seconds;
+ sendq = 80000;
+ maxlinks = 5;
+};
+Class {
+ name = "Other";
+ pingfreq = 1 minutes 30 seconds;
+ sendq = 160000;
+ maxlinks = 400;
+};
+Class {
+ name = "Opers";
+ pingfreq = 1 minutes 30 seconds;
+ sendq = 160000;
+ maxlinks = 10;
+
+ # For connection classes intended for operator use, you can specify
+ # privileges used when the Operator block (see below) names this
+ # class. The local (aka globally_opered) privilege MUST be defined
+ # by either the Class or Operator block. The following privileges
+ # exist:
+ #
+ # local (or propagate, with the opposite sense)
+ # whox (log oper's use of x flag with /WHO)
+ # display (oper status visible to lusers)
+ # chan_limit (can join local channels when in
+ # MAXCHANNELSPERUSER channels)
+ # mode_lchan (can /MODE &channel without chanops)
+ # deop_lchan (cannot be deopped or kicked on local channels)
+ # walk_lchan (can forcibly /JOIN &channel OVERRIDE)
+ # show_invis (see +i users in /WHO x)
+ # show_all_invis (see +i users in /WHO x)
+ # unlimit_query (show more results from /WHO)
+ # local_kill (can kill clients on this server)
+ # rehash (can use /REHASH)
+ # restart (can use /RESTART)
+ # die (can use /DIE)
+ # local_jupe (not used)
+ # set (can use /SET)
+ # local_gline (can set a G-line for this server only)
+ # local_badchan (can set a Gchan for this server only)
+ # see_chan (can see users in +s channels in /WHO)
+ # list_chan (can see +s channels with /LIST S, or modes with /LIST M)
+ # wide_gline (can use ! to force a wide G-line)
+ # see_opers (can see opers without DISPLAY privilege)
+ # local_opmode (can use OPMODE/CLEARMODE on local channels)
+ # force_local_opmode (can use OPMODE/CLEARMODE on quarantined local channels)
+ # kill (can kill clients on other servers)
+ # gline (can issue G-lines to other servers)
+ # jupe_server (not used)
+ # opmode (can use /OPMODE)
+ # badchan (can issue Gchans to other servers)
+ # force_opmode (can use OPMODE/CLEARMODE on quarantined global channels)
+ # apass_opmode (can use OPMODE/CLEARMODE on +A and +U keys)
+ #
+ # For global opers (with propagate = yes or local = no), the default
+ # is to grant all of the above privileges EXCEPT walk_lchan,
+ # unlimit_query, set, badchan, local_badchan and apass_opmode.
+ # For local opers, the default is to grant ONLY the following
+ # privileges:
+ # chan_limit, mode_lchan, show_invis, show_all_invis, local_kill,
+ # rehash, local_gline, local_jupe, local_opmode, whox, display,
+ # force_local_opmode
+ # Any privileges listed in a Class block override the defaults.
+
+ local = no;
+};
+# [Client]
+#
+# To allow clients to connect, they need authorization. This can be
+# done based on hostmask, address mask, and/or with a password.
+# With intelligent use of classes and the maxconnections field in the
+# Client blocks, you can let in a specific domain, but get rid of all other
+# domains in the same toplevel, thus setting up some sort of "reverse
+# Kill block".
+# Client {
+# host = "user@host";
+# ip = "user@ip";
+# password = "password";
+# class = "classname";
+# };
+#
+# Technical description (for examples, see below):
+# For every connecting client, the IP address is known. A reverse lookup
+# on this IP-number is done to get the (/all) hostname(s).
+# Each hostname that belongs to this IP-number is matched to <hostmask>,
+# and the Client {} is used when any matches; the client will then show
+# with this particular hostname. If none of the hostnames match, then
+# the IP-number is matched against the <IP mask ...> field, if this matches
+# then the Client{} is used nevertheless and the client will show with the
+# first (main) hostname if any; if the IP-number did not resolve then the
+# client will show with the dot notation of the IP-number.
+# There is a special case for the UNIX domain sockets and localhost connections
+# though; in this case the <IP mask ...> field is compared with the
+# name of the server (thus not with any IP-number representation). The name
+# of the server is the one returned in the numeric 002 reply, for example:
+# 002 Your host is 2.undernet.org[jolan.ppro], running version ...
+# Then the "jolan.ppro" is the name used for matching.
+# Therefore, unix domain sockets, and connections to localhost would
+# match this block:
+# host = "*@jolan.ppro";
+#
+# This is the "fallback" entry. All .uk, .nl, and all unresolved are
+# in these two lines.
+# By using two different lines, multiple connections from a single IP
+# are only allowed from hostnames which have both valid forward and
+# reverse DNS mappings.
+Client
+{
+ class = "Other";
+ ip = "*@*";
+ maxlinks = 2;
+};
+
+
+Client
+{
+ class = "Other";
+ host = "*@*";
+ maxlinks = 2;
+};
+# If you don't want unresolved dudes to be able to connect to your
+# server, do not specify any "ip = " settings.
+#
+# Here, take care of all American ISPs.
+Client
+{
+ host = "*@*.com";
+ class = "America";
+ maxlinks = 2;
+};
+
+Client
+{
+ host = "*@*.net";
+ class = "America";
+ maxlinks = 2;
+};
+# Now list all the .com / .net domains that you wish to have access...
+# actually it's less work to do it this way than to do it the other
+# way around - K-lining every single ISP in the US.
+# I wish people in Holland just got a .nl domain, and not try to be
+# cool and use .com...
+Client { host = "*@*.wirehub.net"; class = "Other"; maxlinks=2; };
+Client { host = "*@*.planete.net"; class = "Other"; maxlinks=2; };
+Client { host = "*@*.ivg.com"; class = "Other"; maxlinks=2; };
+Client { host = "*@*.ib.com"; class = "Other"; maxlinks=2; };
+Client { host = "*@*.ibm.net"; class = "Other"; maxlinks=2; };
+Client { host = "*@*.hydro.com"; class = "Other"; maxlinks=2; };
+Client { host = "*@*.nl.net"; class = "Local"; maxlinks=2; };
+
+# You can request a more complete listing, including the "list of standard
+# Kill blocks" from the Routing Committee; it will also be sent to you if
+# you apply for a server and get accepted.
+#
+# Ourselves - this makes sure that we can get in, no matter how full
+# the server is (hopefully).
+Client
+{
+ host = "*@*.london.ac.uk";
+ ip = "*@193.37.*";
+ class = "Local";
+ # A maxlinks of over 5 will automatically be glined by euworld on Undernet
+ maxlinks = 5;
+};
+
+# You can put an expression in the maxlinks value, which will make ircd
+# only accept a client when the total number of connections to the network
+# from the same IP number doesn't exceed this number.
+# The following example would accept at most one connection per IP number
+# from "*.swipnet.se" and at most two connections from dial up accounts
+# that have "dial??.*" as host mask:
+# Client {
+# host = "*@*.swipnet.se";
+# maxlinks = 1;
+# class = "Other";
+# };
+# Client {
+# host = "*@dial??.*";
+# maxlinks = 2;
+# class = "Other";
+# };
+#
+# If you are not worried about who connects, this line will allow everyone
+# to connect.
+Client {
+ host = "*@*";
+ ip = "*@*";
+ class = "Other";
+ maxlinks = 2;
+};
+
+
+# [motd]
+#
+# It is possible to show a different Message of the Day to a connecting
+# client depending on its origin.
+# motd {
+# # Note: host can also be a classname.
+# host = "Other";
+# file = "path/to/motd/file";
+# };
+#
+# More than one host = "mask"; entry may be present in one block; this
+# has the same effect as one Motd block for each host entry, but makes
+# it easier to update the messages's filename.
+#
+# DPATH/net_com.motd contains a special MOTD where users are encouraged
+# to register their domains and get their own client{} lines if they're in
+# Europe, or move to US.UnderNet.org if they're in the USA.
+motd {
+ host = "*.net";
+ file = "net_com.motd";
+};
+motd {
+ host = "*.com";
+ file = "net_com.motd";
+};
+motd {
+ host = "America";
+ file = "net_com.motd";
+};
+
+# A different MOTD for ourselves, where we point out that the helpdesk
+# better not be bothered with questions regarding irc...
+motd {
+ host = "*.london.ac.uk";
+ file = "london.motd";
+};
+
+# [UWorld]
+#
+# One of the many nice features of Undernet is "Uworld", a program
+# connected to the net as a server. This allows it to broadcast any mode
+# change, thus allowing opers to, for example, "unlock" a channel that
+# has been taken over.
+# There is only one slight problem: the TimeStamp protocol prevents this.
+# So there is a configuration option to allow them anyway from a certain
+# server.
+# UWorld {
+# # The servername or wildcard mask for it that this applies to.
+# name = "relservername";
+# };
+#
+# You may have have more than one name listed in each block.
+#
+# Note: (1) These lines are agreed on by every server admin on Undernet;
+# (2) These lines must be the same on every single server, or results
+# will be disasterous; (3) This is a useful feature, not something that
+# is a liability and abused regularly (well... :-)
+# If you're on Undernet, you MUST have these lines. I cannnot stress
+# this enough. If all of the servers don't have the same lines, the
+# servers will try to undo the mode hacks that Uworld does. Make SURE that
+# all of the servers have the EXACT same UWorld blocks.
+#
+# If your server starts on a bit larger network, you'll probably get
+# assigned one or two uplinks to which your server can connect.
+# If your uplink(s) also connect to other servers than yours (which is
+# probable), you need to define your uplink as being allowed to "hub".
+# See the Connect block documentation for details on how to do that.
+
+UWorld {
+ name = "uworld.eu.undernet.org";
+ name = "uworld2.undernet.org";
+ name = "uworld.undernet.org";
+ name = "channels.undernet.org";
+ name = "channels2.undernet.org";
+ name = "channels3.undernet.org";
+ name = "channels4.undernet.org";
+ name = "channels5.undernet.org";
+ name = "channels6.undernet.org";
+};
+
+# As of ircu2.10.05 is it possible to Jupe nicks. As per CFV-0095 and
+# CFV-0255, the following nicks must be juped, it is not allowed to
+# jupe others as well.
+Jupe {
+ nick = "A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,{,|,},~,-,_,`";
+ nick = "EuWorld,UWorld,UWorld2";
+ nick = "login,undernet,protocol,pass,newpass,org";
+ nick = "StatServ,NoteServ";
+ nick = "ChanSvr,ChanSaver,ChanServ";
+ nick = "NickSvr,NickSaver,NickServ";
+ nick = "LPT1,LPT2,COM1,COM2,COM3,COM4,AUX";
+};
+
+# [Kill]
+#
+# While running your server, you will most probably encounter individuals
+# or groups of persons that you do not wish to have access to your server.
+#
+# For this purpose, the ircd understands "kill blocks". These are also
+# known as K-lines, by virtue of the former config file format.
+# Kill
+# {
+# host = "user@host";
+# reason = "The reason the user will see";
+# };
+# It is possible to ban on the basis of the real name.
+# It is also possible to use a file as comment for the ban, using
+# file = "file":
+# Kill
+# {
+# realname = "realnametoban";
+# file = "path/to/file/with/reason/to/show";
+# };
+#
+#
+# The default reason is: "You are banned from this server"
+# Note that Kill blocks are local to the server; if you ban a person or a
+# whole domain from your server, they can get on IRC via any other server
+# that doesn't have them Killed (yet).
+#
+# With a simple comment, using quotes:
+Kill { host = "*.au"; reason = "Please use a nearer server"; };
+Kill { host = "*.edu"; reason = "Please use a nearer server"; };
+
+# You can also kill based on username.
+Kill { username = "sub7"; realname = "s*7*"; reason = "You are infected with a Trojan"; };
+
+# The file can contain for example, a reason, a link to the
+# server rules and a contact address. Note the combination
+# of username and host in the host field.
+Kill
+{
+ host = "*luser@unixbox.flooder.co.uk";
+ file = "kline/youflooded.txt";
+};
+
+# IP-based kill lines apply to all hosts, even if an IP address has a
+# properly resolving host name.
+Kill
+{
+ host = "192.168.*";
+ file = "klines/martians";
+};
+
+# The realname field lets you ban by realname...
+Kill
+{
+ realname = "*sub7*";
+ reason = "You are infected with a Trojan";
+};
+
+# [Connect]
+#
+# You probably want your server connected to other servers, so your users
+# have other users to chat with.
+# IRC servers connect to other servers forming a network with a star or
+# tree topology. Loops are not allowed.
+# In this network, two servers can be distinguished: "hub" and "leaf"
+# servers. Leaf servers connect to hubs; hubs connect to each other.
+# Of course, many servers can't be directly classified in one of these
+# categories. Both a fixed and a rule-based decision making system for
+# server links is provided for ircd to decide what links to allow, what
+# to let humans do themselves, and what links to (forcefully) disallow.
+#
+# The Connect blocks
+# define what servers the server connect to, and which servers are
+# allowed to connect.
+# Connect {
+# name = "servername";
+# host = "hostnameORip";
+# vhost = "localIP";
+# password = "passwd";
+# port = portno;
+# class = "classname";
+# maxhops = 2;
+# hub = "*.eu.undernet.org";
+# autoconnect = no;
+# };
+#
+# The "port" field defines the default port the server tries to connect
+# to if an operator uses /connect without specifying a port. This is also
+# the port used when the server attempts to auto-connect to the remote
+# server. (See Class blocks for more informationa about auto-connects).
+# You may tell ircu to not automatically connect to a server by adding
+# "autoconnect = no;"; the default is to autoconnect.
+#
+# If the vhost field is present, the server will use that IP as the
+# local end of connections that it initiates to this server. This
+# overrides the vhost value from the General block.
+#
+# The maxhops field causes an SQUIT if a hub tries to introduce
+# servers farther away than that; the element 'leaf;' is an alias for
+# 'maxhops = 0;'. The hub field limits the names of servers that may
+# be introduced by a hub; the element 'hub;' is an alias for
+# 'hub = "*";'.
+#
+# Our primary uplink.
+Connect {
+ name = "Amsterdam.NL.Eu.UnderNet.org";
+ host = "1.2.3.4";
+ password = "passwd";
+ port = 4400;
+ class = "Server";
+ hub;
+};
+
+# [crule]
+#
+# For an advanced, real-time rule-based routing decision making system
+# you can use crule blocks. For more information, see doc/readme.crules.
+# If more than one server mask is present in a single crule, the rule
+# applies to all servers.
+# CRULE
+# {
+# server = "servermask";
+# rule = "connectrule";
+# # Setting all to yes makes the rule always apply. Otherwise it only
+# # applies to autoconnects.
+# all = yes;
+# };
+CRULE
+{
+ server = "*.US.UnderNet.org";
+ rule = "connected(*.US.UnderNet.org)";
+};
+CRULE
+{
+ server = "*.EU.UnderNet.org";
+ rule = "connected(Amsterdam.NL.EU.*)";
+};
+
+# The following block is recommended for leaf servers:
+CRULE
+{
+ server = "*";
+ rule = "directcon(*)";
+};
+
+# [Operator]
+#
+# Inevitably, you have reached the part about "IRC Operators". Oper status
+# grants some special privileges to a user, like the power to make the
+# server break or (try to) establish a connection with another server,
+# and to "kill" users off IRC.
+# I can write many pages about this; I will restrict myself to saying that
+# if you want to appoint somebody as IRC Operator on your server, that
+# person should be aware of his/her responsibilities, and that you, being
+# the admin, will be held accountable for their actions.
+#
+# There are two sorts of IRC Operators: "local" and "global". Local opers
+# can squit, connect and kill - but only locally: their +o user mode
+# is not not passed along to other servers. On Undernet, this prevents
+# them from using Uworld as well.
+#
+# More than one host = "mask"; entry may be present in one block; this
+# has the same effect as one Operator block for each host entry, but
+# makes it easier to update operator nicks, passwords, classes, and
+# privileges.
+#
+# Operator {
+# host = "host/IP mask";
+# name = "opername";
+# password = "encryptedpass";
+# class = "classname";
+# # You can also set any operator privilege; see the Class block
+# # documentation for details. A privilege defined for a single
+# # Operator will override the privilege settings for the Class
+# # and the default setting.
+# };
+#
+# By default, the password is hashed using the system's native crypt()
+# function. Other password mechanisms are available; the umkpasswd
+# utility from the ircd directory can hash passwords using those
+# mechanisms. If you use a password format that is NOT generated by
+# umkpasswd, ircu will not recognize the oper's password.
+#
+# All privileges are shown with their default values; if you wish to
+# override defaults, you should set only those privileges for the
+# operator. Listing defaulted privileges just makes things harder to
+# find.
+Operator {
+ local = no;
+ host = "*@*.cs.vu.nl";
+ password = "VRKLKuGKn0jLt";
+ name = "Niels";
+ class = "Local";
+};
+Operator {
+ host = "*@*.uu.net";
+ password = "$PLAIN$notencryptedpass";
+ name = "Niels";
+ class = "Opers";
+};
+
+# Note that the <connection class> is optional, but leaving it away
+# puts the opers in class "default", which usually only accepts one
+# connection at a time. If you want users to Oper up more then once per
+# block, then use a connection class that allows more then one connection,
+# for example (using class Local as in the example above):
+#
+# Once you OPER your connection class changes no matter where you are or
+# your previous connection classes. If the defined connection class is
+# Local for the operator block, then your new connection class is Local.
+
+# [Port]
+# When your server gets more full, you will notice delays when trying to
+# connect to your server's primary listening port. It is possible via the
+# Port lines to specify additional ports for the ircd to listen to.
+# De facto ports are: 6667 - standard; 6660-6669 - additional client
+# ports;
+# Undernet uses 4400 for server listener ports.
+# These are just hints, they are in no way official IANA or IETF policies.
+# IANA says we should use port 194, but that requires us to run as root,
+# so we don't do that.
+#
+#
+# Port {
+# port = [ipv4] [ipv6] number;
+# mask = "ipmask";
+# # Use this to control the interface you bind to.
+# vhost = [ipv4] [ipv6] "virtualhostip";
+# # You can specify both virtual host and port number in one entry.
+# vhost = [ipv4] [ipv6] "virtualhostip" number;
+# # Setting to yes makes this server only.
+# server = yes;
+# # Setting to yes makes the port "hidden" from stats.
+# hidden = yes;
+# };
+#
+# The port and vhost lines allow you to specify one or both of "ipv4"
+# and "ipv6" as address families to use for the port. The default is
+# to listen on both IPv4 and IPv6.
+#
+# The mask setting allows you to specify a range of IP addresses that
+# you will allow connections from. This should only contain IP addresses
+# and '*' if used. This field only uses IP addresses. This does not use
+# DNS in any way so you can't use it to allow *.nl or *.uk. Attempting
+# to specify anything other than numbers, dots and stars [0-9.*] will result
+# in the port allowing connections from anyone.
+#
+# The interface setting allows multiply homed hosts to specify which
+# interface to use on a port by port basis, if an interface is not specified
+# the default interface will be used. The interface MUST be the complete
+# IP address for a real hardware interface on the machine running ircd.
+# If you want to use virtual hosting *YOU* *MUST* *USE* *THIS* otherwise it
+# WILL bind to all interfaces - not what most people seem to expect.
+#
+Port {
+ server = yes;
+ port = 4400;
+};
+
+# This is an IPv4-only Server port that is Hidden
+Port {
+ server = yes;
+ hidden = yes;
+ port = ipv4 4401;
+};
+
+# The following are normal client ports
+Port { port = 6667; };
+Port { port = 6668; };
+Port {
+ # This only accepts clients with IPs like 192.168.*.
+ mask = "192.168.*";
+ port = 6666;
+};
+
+# This is a hidden client port, listening on 168.8.21.107.
+Port {
+ vhost = "168.8.21.107";
+ hidden = yes;
+ port = 7000;
+};
+
+# More than one vhost may be present in a single Port block; in this case,
+# we recommend listing the port number on the vhost line for clarity.
+Port {
+ vhost = "172.16.0.1" 6667;
+ vhost = "172.16.3.1" 6668;
+ hidden = no;
+};
+
+# Quarantine blocks disallow operators from using OPMODE and CLEARMODE
+# on certain channels. Opers with the force_opmode (for local
+# channels, force_local_opmode) privilege may override the quarantine
+# by prefixing the channel name with an exclamation point ('!').
+# Wildcards are NOT supported; the channel name must match exactly.
+Quarantine {
+ "#shells" = "Thou shalt not support the h4><0rz";
+ "&kiddies" = "They can take care of themselves";
+};
+
+# This is a server-implemented alias to send a message to a service.
+# The string after Pseudo is the command name; the name entry inside
+# is the service name, used for error messages. More than one nick
+# entry can be provided; the last one listed has highest priority.
+Pseudo "CHANSERV" {
+ name = "X";
+ nick = "X@channels.undernet.org";
+};
+
+# You can also prepend text before the user's message.
+Pseudo "LOGIN" {
+ name = "X";
+ prepend = "LOGIN ";
+ nick = "X@channels.undernet.org";
+};
+
+# You can ask a separate server whether to allow users to connect.
+# Uncomment this ONLY if you have an iauth helper program.
+# IAuth {
+# program = "../path/to/iauth" "-n" "options go here";
+# };
+
+# [features]
+# IRC servers have a large number of options and features. Most of these
+# are set at compile time through the use of #define's--see "make config"
+# for more details--but we are working to move many of these into the
+# configuration file. Features let you configure these at runtime.
+# You only need one feature block in which you use
+# "featurename" = "value1" , "value2", ..., "valuen-1", "valuen";
+#
+# The entire purpose of F:lines are so that you do not have to recompile
+# the IRCD everytime you want to change a feature. All of the features
+# are listed below, and at the bottom is how to set logging.
+#
+# A Special Thanks to Kev for writing the documentation of F:lines. It can
+# be found at doc/readme.features and the logging documentation can be
+# found at doc/readme.log. The defaults used by the Undernet network are
+# below.
+#
+features
+{
+# These log features are the only way to get certain error messages
+# (such as when the server dies from being out of memory). For more
+# explanation of how they work, see doc/readme.log.
+ "LOG" = "SYSTEM" "FILE" "ircd.log";
+ "LOG" = "SYSTEM" "LEVEL" "CRIT";
+# "DOMAINNAME"="<obtained from /etc/resolv.conf by ./configure>";
+# "RELIABLE_CLOCK"="FALSE";
+# "BUFFERPOOL"="27000000";
+# "HAS_FERGUSON_FLUSHER"="FALSE";
+# "CLIENT_FLOOD"="1024";
+# "SERVER_PORT"="4400";
+# "NODEFAULTMOTD"="TRUE";
+# "MOTD_BANNER"="TRUE";
+# "KILL_IPMISMATCH"="FALSE";
+# "IDLE_FROM_MSG"="TRUE";
+# "HUB"="FALSE";
+# "WALLOPS_OPER_ONLY"="FALSE";
+# "NODNS"="FALSE";
+# "RANDOM_SEED"="<you should set one explicitly>";
+# "DEFAULT_LIST_PARAM"="TRUE";
+# "NICKNAMEHISTORYLENGTH"="800";
+# "NETWORK"="UnderNet";
+# "HOST_HIDING"="FALSE";
+# "HIDDEN_HOST"="users.undernet.org";
+# "HIDDEN_IP"="127.0.0.1";
+# "KILLCHASETIMELIMIT"="30";
+# "MAXCHANNELSPERUSER"="10";
+# "NICKLEN" = "12";
+# "AVBANLEN"="40";
+# "MAXBANS"="30";
+# "MAXSILES"="15";
+# "HANGONGOODLINK"="300";
+# "HANGONRETRYDELAY" = "10";
+# "CONNECTTIMEOUT" = "90";
+# "MAXIMUM_LINKS" = "1";
+# "PINGFREQUENCY" = "120";
+# "CONNECTFREQUENCY" = "600";
+# "DEFAULTMAXSENDQLENGTH" = "40000";
+# "GLINEMAXUSERCOUNT" = "20";
+# "MPATH" = "ircd.motd";
+# "RPATH" = "remote.motd";
+# "PPATH" = "ircd.pid";
+# "TOS_SERVER" = "0x08";
+# "TOS_CLIENT" = "0x08";
+# "POLLS_PER_LOOP" = "200";
+# "IRCD_RES_TIMEOUT" = "4";
+# "IRCD_RES_RETRIES" = "2";
+# "AUTH_TIMEOUT" = "9";
+# "IPCHECK_CLONE_LIMIT" = "4";
+# "IPCHECK_CLONE_PERIOD" = "40";
+# "IPCHECK_CLONE_DELAY" = "600";
+# "CHANNELLEN" = "200";
+# "CONFIG_OPERCMDS" = "FALSE";
+# "OPLEVELS" = "TRUE";
+# "ZANNELS" = "TRUE";
+# "LOCAL_CHANNELS" = "TRUE";
+# "ANNOUNCE_INVITES" = "FALSE";
+# These were introduced by Undernet CFV-165 to add "Head-In-Sand" (HIS)
+# behavior to hide most network topology from users.
+# "HIS_SNOTICES" = "TRUE";
+# "HIS_SNOTICES_OPER_ONLY" = "TRUE";
+# "HIS_DEBUG_OPER_ONLY" = "TRUE";
+# "HIS_WALLOPS" = "TRUE";
+# "HIS_MAP" = "TRUE";
+# "HIS_LINKS" = "TRUE";
+# "HIS_TRACE" = "TRUE";
+# "HIS_STATS_a" = "TRUE";
+# "HIS_STATS_c" = "TRUE";
+# "HIS_STATS_d" = "TRUE";
+# "HIS_STATS_e" = "TRUE";
+# "HIS_STATS_f" = "TRUE";
+# "HIS_STATS_g" = "TRUE";
+# "HIS_STATS_i" = "TRUE";
+# "HIS_STATS_j" = "TRUE";
+# "HIS_STATS_J" = "TRUE";
+# "HIS_STATS_k" = "TRUE";
+# "HIS_STATS_l" = "TRUE";
+# "HIS_STATS_L" = "TRUE";
+# "HIS_STATS_m" = "TRUE";
+# "HIS_STATS_M" = "TRUE";
+# "HIS_STATS_o" = "TRUE";
+# "HIS_STATS_p" = "TRUE";
+# "HIS_STATS_q" = "TRUE";
+# "HIS_STATS_r" = "TRUE";
+# "HIS_STATS_R" = "TRUE";
+# "HIS_STATS_t" = "TRUE";
+# "HIS_STATS_T" = "TRUE";
+# "HIS_STATS_u" = "FALSE";
+# "HIS_STATS_U" = "TRUE";
+# "HIS_STATS_v" = "TRUE";
+# "HIS_STATS_w" = "TRUE";
+# "HIS_STATS_x" = "TRUE";
+# "HIS_STATS_y" = "TRUE";
+# "HIS_STATS_z" = "TRUE";
+# "HIS_STATS_IAUTH" = "TRUE";
+# "HIS_WHOIS_SERVERNAME" = "TRUE";
+# "HIS_WHOIS_IDLETIME" = "TRUE";
+# "HIS_WHOIS_LOCALCHAN" = "TRUE";
+# "HIS_WHO_SERVERNAME" = "TRUE";
+# "HIS_WHO_HOPCOUNT" = "TRUE";
+# "HIS_MODEWHO" = "TRUE";
+# "HIS_BANWHO" = "TRUE";
+# "HIS_KILLWHO" = "TRUE";
+# "HIS_REWRITE" = "TRUE";
+# "HIS_REMOTE" = "TRUE";
+# "HIS_NETSPLIT" = "TRUE";
+# "HIS_SERVERNAME" = "*.undernet.org";
+# "HIS_SERVERINFO" = "The Undernet Underworld";
+# "HIS_URLSERVERS" = "http://www.undernet.org/servers.php";
+# "URLREG" = "http://cservice.undernet.org/live/";
+};
+
+# Well, you have now reached the end of this sample configuration
+# file. If you have any questions, feel free to mail
+# <coder-com@undernet.org>. If you are interested in linking your
+# server to the Undernet IRC network visit
+# http://www.routing-com.undernet.org/, and if there are any
+# problems then contact <routing-com@undernet.org> asking for
+# information. Upgrades of the Undernet ircd can be found on
+# http://coder-com.undernet.org/.
+#
+# For the rest: Good Luck!
+#
+# -- Niels.
projects / ircu2.10.12-pk.git / blobdiff