# First some information about the server.
# General {
# name = "servername";
-# vhost = "virtualhost";
+# vhost = "ipv4vhost";
+# vhost = "ipv6vhost";
# description = "description";
# numeric = numericnumber;
# };
#
-# <virtual host> must contain either a * or a valid IPv4 address in
-# dotted quad notation. (127.0.0.1) The address MUST be the address
-# of a physical interface on the host. This address is used for outgoing
-# connections only, see Port{} for listener virtual hosting.
-# If in doubt put a * or the IP of your primary interface here.
-# The server must be compiled with virtual hosting turned on to get this
-# to work correctly.
+# If present, <virtual host> must contain a valid address in dotted
+# quad or IPv6 numeric notation (127.0.0.1 or ::1). The address MUST
+# be the address of a physical interface on the host. This address is
+# used for outgoing connections if the Connect{} block does not
+# override it. See Port{} for listener virtual hosting. If in doubt,
+# leave it out -- or use "*", which has the same meaning as no vhost.
+#
+# You may specify both an IPv4 virtual host and an IPv6 virtual host,
+# to indicate which address should be used for outbound connections
+# of the respective type.
#
# Note that <server numeric> has to be unique on the network your server
# is running on, must be between 0 and 4095, and is not updated on a rehash.
# usermode = "+i";
# };
#
+# maxlinks should be set at either 0 or 1.
+#
# <connect freq> applies only to servers, and specifies the frequency
# that the server tries to autoconnect. setting this to 0 will cause
# the server to attempt to connect repeatedly with no delay until the
# <maximum links> condition is satisfied. This is a Bad Thing(tm).
# Note that times can be specified as a number, or by giving something
# like: 1 minutes 20 seconds, or 1*60+20.
-# Client {
-# host = "user@host";
-# ip = "ip@host";
-# password = "password";
-# class = "classname";
-# };
-#
-# <maximum links> should be set at either 0 or 1.
#
# Recommended server classes:
# All your server uplinks you are not a hub for.
sendq = 9000000;
};
+# Client {
+# username = "ident";
+# host = "host";
+# ip = "127.0.0.0/8";
+# password = "password";
+# class = "classname";
+# maxlinks = 3;
+# };
+#
+# Everything in a Client block is optional. If a username mask is
+# given, it must match the client's username from the IDENT protocol.
+# If a host mask is given, the client's hostname must resolve and
+# match the host mask. If a CIDR-style IP mask is given, the client
+# must have an IP matching that range. If maxlinks is given, it is
+# limits the number of matching clients allowed from a particular IP
+# address.
+#
# Recommended client classes:
# Client classes. 10 = locals; 2 = for all .net and .com that are not
# in Europe; 1 = for everybody.
Client
{
class = "Other";
- host = "*@*";
+ username = "*";
};
Class {
name = "America";
# exist:
#
# local (or propagate, with the opposite sense)
- # whox (can use x flag with /WHO)
+ # whox (log oper's use of x flag with /WHO)
# display (oper status visible to lusers)
# chan_limit (can join local channels when in
# MAXCHANNELSPERUSER channels)
# unlimit_query (show more results from /WHO)
# local_kill (can kill clients on this server)
# rehash (can use /REHASH)
+ # restart (can use /RESTART)
# die (can use /DIE)
- # local_jupe_server (not used)
+ # local_jupe (not used)
# set (can use /SET)
# local_gline (can set a G-line for this server only)
# local_badchan (can set a Gchan for this server only)
# see_chan (can see users in +s channels in /WHO)
# wide_gline (can use ! to force a wide G-line)
# see_opers (can see opers without DISPLAY privilege)
+ # local_opmode (can use OPMODE/CLEARMODE on local channels)
# force_local_opmode (can use OPMODE/CLEARMODE on quarantined local channels)
# kill (can kill clients on other servers)
# gline (can issue G-lines to other servers)
# opmode (can use /OPMODE)
# badchan (can issue Gchans to other servers)
# force_opmode (can use OPMODE/CLEARMODE on quarantined global channels)
+ # apass_opmode (can use OPMODE/CLEARMODE on +A and +U keys)
#
# For global opers (with propagate = yes or local = no), the default
- # is to grant all of the above privileges. For local opers, the
- # default is to grant ONLY the following privileges:
+ # is to grant all of the above privileges EXCEPT apass_opmode. For
+ # local opers, the default is to grant ONLY the following privileges:
# chan_limit, mode_lchan, show_invis, show_all_invis, local_kill,
# rehash, local_gline, local_jupe, local_opmode, whox, display,
# force_local_opmode
class = "Local";
};
-# You can put a digit (0..9) in the password value, which will make ircd
+# You can put an expression in the maxlinks value, which will make ircd
# only accept a client when the total number of connections to the network
# from the same IP number doesn't exceed this number.
# The following example would accept at most one connection per IP number
# that have "dial??.*" as host mask:
# Client {
# host = "*@*.swipnet.se";
-# password = "1";
+# maxlinks = 1;
# class = "Other";
# };
# Client {
# host = "*@dial??.*";
-# password = "2";
+# maxlinks = 2;
# class = "Other";
# };
#
file = "london.motd";
};
-# [Server]
+# [UWorld]
#
# One of the many nice features of Undernet is "Uworld", a program
# connected to the net as a server. This allows it to broadcast any mode
# There is only one slight problem: the TimeStamp protocol prevents this.
# So there is a configuration option to allow them anyway from a certain
# server.
-# Server {
+# UWorld {
# # The servername or wildcard mask for it that this applies to.
# name = "relservername";
-# # The mask of servers they are allowed to introduce(for hub=yes;) or
-# # not allowed to introduce(for leaf=yes).
-# mask = "servermask";
-# # No is assumed for these unless you set it to yes.
-# uworld = no;
-# hub = no;
-# # Yes is assumed for "leaf" unless you set it to no.
-# leaf = yes;
# };
#
+# You may have have more than one name listed in each block.
+#
# Note: (1) These lines are agreed on by every server admin on Undernet;
# (2) These lines must be the same on every single server, or results
# will be disasterous; (3) This is a useful feature, not something that
# If you're on Undernet, you MUST have these lines. I cannnot stress
# this enough. If all of the servers don't have the same lines, the
# servers will try to undo the mode hacks that Uworld does. Make SURE that
-# all of the servers have the EXACT same Ulines.
+# all of the servers have the EXACT same UWorld blocks.
#
# If your server starts on a bit larger network, you'll probably get
# assigned one or two uplinks to which your server can connect.
# If your uplink(s) also connect to other servers than yours (which is
# probable), you need to define your uplink as being allowed to "hub".
-# To do this, set "hub = yes;"
-# You can also force a server(even one that doesn't connect to you)
-# to be a leaf with "leaf = yes;"
+# See the Connect block documentation for details on how to do that.
-Server {
+UWorld {
name = "uworld.eu.undernet.org";
- mask = "*";
- uworld = yes;
- hub = yes;
-};
-Server {
name = "uworld2.undernet.org";
- mask = "*";
- uworld = yes;
- hub = yes;
-};
-Server {
name = "uworld.undernet.org";
- mask = "*";
- uworld = yes;
- hub = yes;
-};
-Server {
name = "channels.undernet.org";
- mask = "*";
- uworld = yes;
- hub = yes;
-};
-Server {
name = "channels2.undernet.org";
- mask = "*";
- uworld = yes;
- hub = yes;
-};
-Server {
name = "channels3.undernet.org";
- mask = "*";
- uworld = yes;
- hub = yes;
-};
-Server {
name = "channels4.undernet.org";
- mask = "*";
- uworld = yes;
- hub = yes;
-};
-Server {
name = "channels5.undernet.org";
- mask = "*";
- uworld = yes;
- hub = yes;
-};
-Server {
name = "channels6.undernet.org";
- mask = "*";
- uworld = yes;
- hub = yes;
-};
-Server {
- name = "Amsterdam.NL.Eu.UnderNet.org";
- mask = "*";
- hub = yes;
-};
-# An example just to make sure IRCnet doesn't get on undernet...
-Server {
- name = "*";
- mask = "eris.berkeley.edu";
- hub = yes;
};
-# As of ircu2.10.05 is it possible to Jupe nicks. As per CFV-0095, the
-# following nicks must be juped, it is not allowed to jupe others as well.
+# As of ircu2.10.05 is it possible to Jupe nicks. As per CFV-0095 and
+# CFV-0255, the following nicks must be juped, it is not allowed to
+# jupe others as well.
Jupe {
- nick = "EuWorld,E,StatServ,NoteServ";
- nick = "UWorld2,ChanSvr,ChanSaver,ChanServ";
- nick = "Uworld,NickSvr,NickSaver,NickServ";
- nick = "LPT1,X,login,LPT2,W,Undernet,COM1,V,protocol,COM2";
- nick = "U,pass,COM3,Y,AUX,COM4,Z,newpass";
+ nick = "A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,{,|,},~,-,_,`";
+ nick = "EuWorld,UWorld,UWorld2";
+ nick = "login,undernet,protocol,pass,newpass,org";
+ nick = "StatServ,NoteServ";
+ nick = "ChanSvr,ChanSaver,ChanServ";
+ nick = "NickSvr,NickSaver,NickServ";
+ nick = "LPT1,LPT2,COM1,COM2,COM3,COM4,AUX";
};
# [Kill]
#
#
# The default reason is: "You are banned from this server"
-# Note that K-lines are local to the server; if you ban a person or a
+# Note that Kill blocks are local to the server; if you ban a person or a
# whole domain from your server, they can get on IRC via any other server
-# that doesn't have them K-lined (yet).
+# that doesn't have them Killed (yet).
#
# With a simple comment, using quotes:
Kill { host = "*.au"; reason = "Please use a nearer server"; };
Kill { host = "*.edu"; reason = "Please use a nearer server"; };
+# You can also kill based on username.
+Kill { username = "sub7"; realname = "s*7*"; reason = "You are infected with a Trojan"; };
+
# The file can contain for example, a reason, a link to the
-# server rules and a contact address.
+# server rules and a contact address. Note the combination
+# of username and host in the host field.
Kill
{
host = "*luser@unixbox.flooder.co.uk";
# The realname field lets you ban by realname...
Kill
{
- host = "*sub7*";
+ realname = "*sub7*";
reason = "You are infected with a Trojan";
};
# password = "passwd";
# port = portno;
# class = "classname";
+# maxhops = 2;
+# hub = "*.eu.undernet.org";
+# autoconnect = no;
# };
#
# The "port" field defines the default port the server tries to connect
# to if an operator uses /connect without specifying a port. This is also
-# the port used when the server attempts to auto-connect to the remote
+# the port used when the server attempts to auto-connect to the remote
# server. (See Class blocks for more informationa about auto-connects).
+# You may tell ircu to not automatically connect to a server by adding
+# "autoconnect = no;"; the default is to autoconnect.
+#
+# The maxhops field causes an SQUIT if a hub tries to introduce
+# servers farther away than that; the element 'leaf;' is an alias for
+# 'maxhops = 0;'. The hub field limits the names of servers that may
+# be introduced by a hub; the element 'hub;' is an alias for
+# 'hub = "*";'.
#
# Our primary uplink.
Connect {
host = "1.2.3.4";
password = "passwd";
port = 4400;
- class = "Servers";
+ class = "Server";
+ hub;
};
# [crule]
# # and the default setting.
# };
#
-# The encrypted password is optional. If you wish to encrypt your
-# password, there is a utility in the ircd. Please read the file
-# tools/README.
+# By default, the password is hashed using the system's native crypt()
+# function. Other password mechanisms are available; the umkpasswd
+# utility from the ircd directory can hash passwords using those
+# mechanisms.
+#
# All privileges are shown with their default values; if you wish to
# override defaults, you should set only those privileges for the
# operator. Listing defaulted privileges just makes things harder to
};
Operator {
host = "*@*.uu.net";
- password = "notencryptedpass";
+ password = "$PLAIN$notencryptedpass";
name = "Niels";
class = "Opers";
};
Port { port = 6667; };
Port { port = 6668; };
Port {
+ # This only accepts clients with IPs like 192.168.*.
mask = "192.168.*";
port = 6666;
};
-# This is a hidden client port, listening on the interface associated
-# with the IP address 168.8.21.107
+# This is a hidden client port, listening on 168.8.21.107.
Port {
- mask = "168.8.21.107";
+ vhost = "168.8.21.107";
hidden = yes;
port = 7000;
};
+# Quarantine blocks disallow operators from using OPMODE and CLEARMODE
+# on certain channels. Opers with the force_opmode (for local
+# channels, force_local_opmode) privilege may override the quarantine
+# by prefixing the channel name with an exclamation point ('!').
+# Wildcards are NOT supported; the channel name must match exactly.
+Quarantine {
+ "#shells" = "Thou shalt not support the h4><0rz";
+ "&kiddies" = "They can take care of themselves";
+};
+
# This is a server-implemented alias to send a message to a service.
# The string after Pseudo is the command name; the name entry inside
# is the service name, used for error messages. More than one nick
#
features
{
+# These log features are the only way to get certain error messages
+# (such as when the server dies from being out of memory). For more
+# explanation of how they work, see doc/readme.log.
+ "LOG" = "SYSTEM" "FILE" "ircd.log";
+ "LOG" = "SYSTEM" "LEVEL" "CRIT";
# "DOMAINNAME"="<obtained from /etc/resolv.conf by ./configure>";
# "RELIABLE_CLOCK"="FALSE";
# "BUFFERPOOL"="27000000";
# "IPCHECK_CLONE_LIMIT" = "4";
# "IPCHECK_CLONE_PERIOD" = "40";
# "IPCHECK_CLONE_DELAY" = "600";
+# "CHANNELLEN" = "200";
# "CONFIG_OPERCMDS" = "FALSE";
# "OPLEVELS" = "TRUE";
# "LOCAL_CHANNELS" = "TRUE";
# "HIS_STATS_e" = "TRUE";
# "HIS_STATS_f" = "TRUE";
# "HIS_STATS_g" = "TRUE";
-# "HIS_STATS_h" = "TRUE";
# "HIS_STATS_i" = "TRUE";
# "HIS_STATS_j" = "TRUE";
+# "HIS_STATS_J" = "TRUE";
# "HIS_STATS_k" = "TRUE";
# "HIS_STATS_l" = "TRUE";
# "HIS_STATS_L" = "TRUE";
projects / ircu2.10.12-pk.git / blobdiff