-# ircd.conf configuration file for ircd version ircu2.9.mu and ircu2.10
+# ircd.conf - configuration file for ircd version ircu2.10
#
-# Last Updated: 26, June 2001.
+# Last Updated: 20, March 2002.
#
# Written by Niels <niels@undernet.org>, based on the original example.conf,
# server code and some real-life (ahem) experience.
#
# Updated and heavily modified by Braden <dbtem@yahoo.com>.
#
+# Rewritten by A1kmm(Andrew Miller)<a1kmm@mware.virtualave.net> to support
+# the new flex/bison configuration parser.
+#
# Thanks and credits to: Run, Trillian, Cym, Morrissey, Chaos, Flynn,
# Xorath, WildThang, Mmmm, SeKs, Ghostwolf and
# all other Undernet IRC Admins and Operators,
# but if all the other hubs in Europe aren't in service, it can connect
# to one in the US by itself.
#
-# All configuration options start with a letter identifying the option,
-# and a colon separated list of options. Unused fields should be left
-# blank.
+# The configuration format consists of a number of blocks in the format
+# BlockName { setting = number; setting2 = "string"; setting3 = yes; };
+# Note that comments start from a #(hash) and go to the end of the line.
+# Whitespace(space, tab, or carriage return/linefeed) are ignored and may
+# be used to make the configuration file more readable.
#
# Please note that when ircd puts the configuration lines into practice,
# it parses them exactly the other way round than they are listed here.
-# It reads the lines in reverse order.
+# It uses the blocks in reverse order.
#
-# This means that you should start your I: lines with the "fall through",
-# most vanilla one and end with the most detailed.
+# This means that you should start your Client blocks with the
+# "fall through", most vanilla one, and end with the most detailed.
#
# There is a difference between the "hostname" and the "server name"
# of the machine that the server is run on. For example, the host can
# it to work.
-# [M:line]
+# [General]
#
# First some information about the server.
-# M:<server name>:<virtual host>:<description>:<not used>:<server numeric>
-#
-# <virtual host> must contain either a * or a valid IPv4 address in
-# dotted quad notation. (127.0.0.1) The address MUST be the address
-# of a physical interface on the host. This address is used for outgoing
-# connections only, see P:lines for listener virtual hosting.
-# If in doubt put a * or the IP of your primary interface here.
-# The server must be compiled with virtual hosting turned on to get this
-# to work correctly.
+# General {
+# name = "servername";
+# vhost = "ipv4vhost";
+# vhost = "ipv6vhost";
+# description = "description";
+# numeric = numericnumber;
+# dns vhost = "ipv4vhost";
+# dns vhost = "ipv6vhost";
+# dns server = "ipaddress";
+# dns server = "ipaddress2";
+# };
+#
+# If present, <virtual host> must contain a valid address in dotted
+# quad or IPv6 numeric notation (127.0.0.1 or ::1). The address MUST
+# be the address of a physical interface on the host. This address is
+# used for outgoing connections if the Connect{} block does not
+# override it. See Port{} for listener virtual hosting. If in doubt,
+# leave it out -- or use "*", which has the same meaning as no vhost.
+#
+# You may specify both an IPv4 virtual host and an IPv6 virtual host,
+# to indicate which address should be used for outbound connections
+# of the respective type.
#
# Note that <server numeric> has to be unique on the network your server
# is running on, must be between 0 and 4095, and is not updated on a rehash.
-M:London.UK.Eu.UnderNet.org::University of London, England::1
-
-
-# [A:line]
+#
+# The two DNS lines allow you to specify the local IP address to use
+# for DNS lookups ("dns vhost") and one or more DNS server addresses
+# to use. If the vhost is ambiguous for some reason, you may list
+# IPV4 and/or IPV6 between the equals sign and the address string.
+# The default DNS vhost is to let the operating system assign the
+# address, and the default DNS servers are read from /etc/resolv.conf.
+# In most cases, you do not need to specify either the dns vhost or
+# the dns server.
+General {
+ name = "London.UK.Eu.UnderNet.org";
+ description = "University of London, England";
+ numeric = 1;
+};
+
+# [Admin]
#
# This sets information that can be retrieved with the /ADMIN command.
# It should contain at least an admin Email contact address.
-# A:<line 1>:<line 2>:<line 3>
-A:The University of London:Undernet IRC server:IRC Admins <irc@london.ac.uk>
-
+Admin {
+ # At most two location lines are allowed...
+ Location = "The University of London";
+ Location = "Undernet IRC server";
+ Contact = "IRC Admins <irc@london.ac.uk>";
+};
-# [Y:lines]
+# [Classes]
#
# All connections to the server are associated with a certain "connection
# class", be they incoming or outgoing (initiated by the server), be they
-# clients, servers or Martians. (Note that ircd doesn't have direct support
-# for Martians (yet?); they will have to register as normal users. ;-)
-# Take the following Y: lines only as a guide.
-# Y:<class>:<ping freq>:<connect freq>:<maximum links>:<sendq size>
-#
+# clients or servers.
+#
+# Class {
+# name = "<class>";
+# pingfreq = time;
+# connectfreq = time;
+# maxlinks = number;
+# sendq = size;
+# usermode = "+i";
+# };
+#
+# For connection classes used on server links, maxlinks should be set
+# to either 0 (for hubs) or 1 (for leaf servers). Client connection
+# classes may use maxlinks between 0 and approximately 4,000,000,000.
+# maxlinks = 0 means there is no limit on the number of connections
+# using the class.
+#
# <connect freq> applies only to servers, and specifies the frequency
# that the server tries to autoconnect. setting this to 0 will cause
# the server to attempt to connect repeatedly with no delay until the
# <maximum links> condition is satisfied. This is a Bad Thing(tm).
-#
-# <maximum links> should be set at either 0 or 1.
-#
-# Server classes: 90 = all your uplinks for who you do not wish to hub;
-# 80 = leaf servers (only used if your server is a hub)
-Y:90:90:300:1:9000000
-Y:80:90:300:0:9000000
-
-# Client classes. 10 = locals; 2 = for all .net and .com that are not
-# in Europe; 1 = for everybody.
-Y:10:90:0:100:160000
-Y:2:90:0:5:80000
-Y:1:90:0:400:160000
-
-
-# [I:lines]
+# Note that times can be specified as a number, or by giving something
+# like: 1 minutes 20 seconds, or 1*60+20.
+#
+# Recommended server classes:
+# All your server uplinks you are not a hub for.
+Class {
+ name = "Server";
+ pingfreq = 1 minutes 30 seconds;
+ connectfreq = 5 minutes;
+ maxlinks = 1;
+ sendq = 9000000;
+};
+# All the leaf servers you hub for.
+Class {
+ name = "LeafServer";
+ pingfreq = 1 minutes 30 seconds;
+ connectfreq = 5 minutes;
+ maxlinks = 0;
+ sendq = 9000000;
+};
+
+# Client {
+# username = "ident";
+# host = "host";
+# ip = "127.0.0.0/8";
+# password = "password";
+# class = "classname";
+# maxlinks = 3;
+# };
+#
+# Everything in a Client block is optional. If a username mask is
+# given, it must match the client's username from the IDENT protocol.
+# If a host mask is given, the client's hostname must resolve and
+# match the host mask. If a CIDR-style IP mask is given, the client
+# must have an IP matching that range. If maxlinks is given, it is
+# limits the number of matching clients allowed from a particular IP
+# address.
+#
+# Take the following class blocks only as a guide.
+Class {
+ name = "Local";
+ pingfreq = 1 minutes 30 seconds;
+ sendq = 160000;
+ maxlinks = 100;
+ usermode = "+iw";
+};
+Class {
+ name = "America";
+ pingfreq = 1 minutes 30 seconds;
+ sendq = 80000;
+ maxlinks = 5;
+};
+Class {
+ name = "Other";
+ pingfreq = 1 minutes 30 seconds;
+ sendq = 160000;
+ maxlinks = 400;
+};
+Class {
+ name = "Opers";
+ pingfreq = 1 minutes 30 seconds;
+ sendq = 160000;
+ maxlinks = 10;
+
+ # For connection classes intended for operator use, you can specify
+ # privileges used when the Operator block (see below) names this
+ # class. The local (aka globally_opered) privilege MUST be defined
+ # by either the Class or Operator block. The following privileges
+ # exist:
+ #
+ # local (or propagate, with the opposite sense)
+ # whox (log oper's use of x flag with /WHO)
+ # display (oper status visible to lusers)
+ # chan_limit (can join local channels when in
+ # MAXCHANNELSPERUSER channels)
+ # mode_lchan (can /MODE &channel without chanops)
+ # deop_lchan (cannot be deopped or kicked on local channels)
+ # walk_lchan (can forcibly /JOIN &channel OVERRIDE)
+ # show_invis (see +i users in /WHO x)
+ # show_all_invis (see +i users in /WHO x)
+ # unlimit_query (show more results from /WHO)
+ # local_kill (can kill clients on this server)
+ # rehash (can use /REHASH)
+ # restart (can use /RESTART)
+ # die (can use /DIE)
+ # local_jupe (not used)
+ # set (can use /SET)
+ # local_gline (can set a G-line for this server only)
+ # local_badchan (can set a Gchan for this server only)
+ # see_chan (can see users in +s channels in /WHO)
+ # list_chan (can see +s channels with /LIST S, or modes with /LIST M)
+ # wide_gline (can use ! to force a wide G-line)
+ # see_opers (can see opers without DISPLAY privilege)
+ # local_opmode (can use OPMODE/CLEARMODE on local channels)
+ # force_local_opmode (can use OPMODE/CLEARMODE on quarantined local channels)
+ # kill (can kill clients on other servers)
+ # gline (can issue G-lines to other servers)
+ # jupe_server (not used)
+ # opmode (can use /OPMODE)
+ # badchan (can issue Gchans to other servers)
+ # force_opmode (can use OPMODE/CLEARMODE on quarantined global channels)
+ # apass_opmode (can use OPMODE/CLEARMODE on +A and +U keys)
+ #
+ # For global opers (with propagate = yes or local = no), the default
+ # is to grant all of the above privileges EXCEPT walk_lchan,
+ # unlimit_query, set, badchan, local_badchan and apass_opmode.
+ # For local opers, the default is to grant ONLY the following
+ # privileges:
+ # chan_limit, mode_lchan, show_invis, show_all_invis, local_kill,
+ # rehash, local_gline, local_jupe, local_opmode, whox, display,
+ # force_local_opmode
+ # Any privileges listed in a Class block override the defaults.
+
+ local = no;
+};
+# [Client]
#
# To allow clients to connect, they need authorization. This can be
# done based on hostmask, address mask, and/or with a password.
# With intelligent use of classes and the maxconnections field in the
-# Y: lines, you can let in a specific domain, but get rid of all other
+# Client blocks, you can let in a specific domain, but get rid of all other
# domains in the same toplevel, thus setting up some sort of "reverse
-# K: line".
-# I:<IP mask or crap to force resolving>:<opt passwd>:<hostmask>::<class>
+# Kill block".
+# Client {
+# host = "user@host";
+# ip = "user@ip";
+# password = "password";
+# class = "classname";
+# };
#
# Technical description (for examples, see below):
# For every connecting client, the IP address is known. A reverse lookup
# on this IP-number is done to get the (/all) hostname(s).
# Each hostname that belongs to this IP-number is matched to <hostmask>,
-# and the I: line is used when any matches; the client will then show
+# and the Client {} is used when any matches; the client will then show
# with this particular hostname. If none of the hostnames match, then
# the IP-number is matched against the <IP mask ...> field, if this matches
-# then the I: line is used nevertheless and the client will show with the
+# then the Client{} is used nevertheless and the client will show with the
# first (main) hostname if any; if the IP-number did not resolve then the
# client will show with the dot notation of the IP-number.
# There is a special case for the UNIX domain sockets and localhost connections
# 002 Your host is 2.undernet.org[jolan.ppro], running version ...
# Then the "jolan.ppro" is the name used for matching.
# Therefore, unix domain sockets, and connections to localhost would
-# match this I: line:
-# I:jolan.ppro::foobar::1
-# Finally, I: lines with empty <IP mask ..> or <hostmask> fields are skipped.
+# match this block:
+# host = "*@jolan.ppro";
#
# This is the "fallback" entry. All .uk, .nl, and all unresolved are
# in these two lines.
# By using two different lines, multiple connections from a single IP
# are only allowed from hostnames which have both valid forward and
# reverse DNS mappings.
-I:*@*:1:Unresolved::1
-I:Resolved::*@*::1
-
+Client
+{
+ class = "Other";
+ ip = "*@*";
+ maxlinks = 2;
+};
+
+
+Client
+{
+ class = "Other";
+ host = "*@*";
+ maxlinks = 2;
+};
# If you don't want unresolved dudes to be able to connect to your
-# server, use just:
-# I:NotMatchingCrap::*@*::1
+# server, do not specify any "ip = " settings.
#
# Here, take care of all American ISPs.
-I:Resolved::*@*.com::2
-I:Resolved::*@*.net::2
-
+Client
+{
+ host = "*@*.com";
+ class = "America";
+ maxlinks = 2;
+};
+
+Client
+{
+ host = "*@*.net";
+ class = "America";
+ maxlinks = 2;
+};
# Now list all the .com / .net domains that you wish to have access...
# actually it's less work to do it this way than to do it the other
-# way around - K: lining every single ISP in the US.
+# way around - K-lining every single ISP in the US.
# I wish people in Holland just got a .nl domain, and not try to be
# cool and use .com...
-I:Resolved::*@*.wirehub.net::1
-I:Resolved::*@*.planete.net::1
-I:Resolved::*@*.ivg.com::1
-I:Resolved::*@*.ib.com::1
-I:Resolved::*@*.ibm.net::1
-I:Resolved::*@*.hydro.com::1
-I:Resolved::*@*.NL.net::1
+Client { host = "*@*.wirehub.net"; class = "Other"; maxlinks=2; };
+Client { host = "*@*.planete.net"; class = "Other"; maxlinks=2; };
+Client { host = "*@*.ivg.com"; class = "Other"; maxlinks=2; };
+Client { host = "*@*.ib.com"; class = "Other"; maxlinks=2; };
+Client { host = "*@*.ibm.net"; class = "Other"; maxlinks=2; };
+Client { host = "*@*.hydro.com"; class = "Other"; maxlinks=2; };
+Client { host = "*@*.nl.net"; class = "Local"; maxlinks=2; };
# You can request a more complete listing, including the "list of standard
-# K-lines" from the Routing Committee; it will also be sent to you if
+# Kill blocks" from the Routing Committee; it will also be sent to you if
# you apply for a server and get accepted.
#
# Ourselves - this makes sure that we can get in, no matter how full
# the server is (hopefully).
-I:*@193.37.*::*@*.london.ac.uk::10
-
-# You can put a digit (0..9) in the password field, which will make ircd
+Client
+{
+ host = "*@*.london.ac.uk";
+ ip = "*@193.37.*";
+ class = "Local";
+ # A maxlinks of over 5 will automatically be glined by euworld on Undernet
+ maxlinks = 5;
+};
+
+# You can put an expression in the maxlinks value, which will make ircd
# only accept a client when the total number of connections to the network
# from the same IP number doesn't exceed this number.
# The following example would accept at most one connection per IP number
# from "*.swipnet.se" and at most two connections from dial up accounts
# that have "dial??.*" as host mask:
-# I:Resolved:1:*@*.swipnet.se::1
-# I:Resolved:2:*@dial??.*::1
+# Client {
+# host = "*@*.swipnet.se";
+# maxlinks = 1;
+# class = "Other";
+# };
+# Client {
+# host = "*@dial??.*";
+# maxlinks = 2;
+# class = "Other";
+# };
#
# If you are not worried about who connects, this line will allow everyone
# to connect.
-I:*::*::1
+Client {
+ host = "*@*";
+ ip = "*@*";
+ class = "Other";
+ maxlinks = 2;
+};
-# [T:lines]
+# [motd]
#
# It is possible to show a different Message of the Day to a connecting
# client depending on its origin.
-# T:<hostmask>:<path to motd file>
-# or:
-# T:<classnumber>:<path to motd file>
+# motd {
+# # Note: host can also be a classname.
+# host = "Other";
+# file = "path/to/motd/file";
+# };
+#
+# More than one host = "mask"; entry may be present in one block; this
+# has the same effect as one Motd block for each host entry, but makes
+# it easier to update the messages's filename.
#
# DPATH/net_com.motd contains a special MOTD where users are encouraged
-# to register their domains and get their own I: lines if they're in
+# to register their domains and get their own client{} lines if they're in
# Europe, or move to US.UnderNet.org if they're in the USA.
-T:*.net:net_com.motd
-T:*.com:net_com.motd
-T:2:net_com.motd
+motd {
+ host = "*.net";
+ file = "net_com.motd";
+};
+motd {
+ host = "*.com";
+ file = "net_com.motd";
+};
+motd {
+ host = "America";
+ file = "net_com.motd";
+};
# A different MOTD for ourselves, where we point out that the helpdesk
# better not be bothered with questions regarding irc...
-T:*.london.ac.uk:london.motd
+motd {
+ host = "*.london.ac.uk";
+ file = "london.motd";
+};
-
-# [U:lines]
+# [UWorld]
#
# One of the many nice features of Undernet is "Uworld", a program
# connected to the net as a server. This allows it to broadcast any mode
# There is only one slight problem: the TimeStamp protocol prevents this.
# So there is a configuration option to allow them anyway from a certain
# server.
-# U:<Server Name>:<Juped Nicks>:*
+# UWorld {
+# # The servername or wildcard mask for it that this applies to.
+# name = "relservername";
+# };
+#
+# You may have have more than one name listed in each block.
#
# Note: (1) These lines are agreed on by every server admin on Undernet;
# (2) These lines must be the same on every single server, or results
# If you're on Undernet, you MUST have these lines. I cannnot stress
# this enough. If all of the servers don't have the same lines, the
# servers will try to undo the mode hacks that Uworld does. Make SURE that
-# all of the servers have the EXACT same Ulines.
+# all of the servers have the EXACT same UWorld blocks.
#
-# As of ircu2.10.05 is it possible to Jupe nicks. Juped nicks need to be
-# added to U: lines. As per CFV-0095, the following nicks must be juped,
-# it is not allowed to jupe others as well.
-U:Uworld.EU.undernet.org:EuWorld,E,StatServ,NoteServ:*
-U:Uworld2.undernet.org:UWorld2,ChanSvr,ChanSaver,ChanServ:*
-U:Uworld.undernet.org:Uworld,NickSvr,NickSaver,NickServ:*
-U:channels.undernet.org:LPT1,X,login:*
-U:channels2.undernet.org:LPT2,W,Undernet:*
-U:channels3.undernet.org:COM1,V,protocol:*
-U:channels4.undernet.org:COM2,U,pass:*
-U:channels5.undernet.org:COM3,Y,AUX:*
-U:channels6.undernet.org:COM4,Z,newpass:*
-
-
-# [K:lines]
+# If your server starts on a bit larger network, you'll probably get
+# assigned one or two uplinks to which your server can connect.
+# If your uplink(s) also connect to other servers than yours (which is
+# probable), you need to define your uplink as being allowed to "hub".
+# See the Connect block documentation for details on how to do that.
+
+UWorld {
+ name = "uworld.eu.undernet.org";
+ name = "uworld2.undernet.org";
+ name = "uworld.undernet.org";
+ name = "channels.undernet.org";
+ name = "channels2.undernet.org";
+ name = "channels3.undernet.org";
+ name = "channels4.undernet.org";
+ name = "channels5.undernet.org";
+ name = "channels6.undernet.org";
+};
+
+# As of ircu2.10.05 is it possible to Jupe nicks. As per CFV-0095 and
+# CFV-0255, the following nicks must be juped, it is not allowed to
+# jupe others as well.
+Jupe {
+ nick = "A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z,{,|,},~,-,_,`";
+ nick = "EuWorld,UWorld,UWorld2";
+ nick = "login,undernet,protocol,pass,newpass,org";
+ nick = "StatServ,NoteServ";
+ nick = "ChanSvr,ChanSaver,ChanServ";
+ nick = "NickSvr,NickSaver,NickServ";
+ nick = "LPT1,LPT2,COM1,COM2,COM3,COM4,AUX";
+};
+
+# [Kill]
#
# While running your server, you will most probably encounter individuals
# or groups of persons that you do not wish to have access to your server.
#
-# For this purpose, the ircd understands "kill lines".
-# K:<host/IP mask>:"<opt reason>":<username mask>
+# For this purpose, the ircd understands "kill blocks". These are also
+# known as K-lines, by virtue of the former config file format.
+# Kill
+# {
+# host = "user@host";
+# reason = "The reason the user will see";
+# };
+# It is possible to ban on the basis of the real name.
+# It is also possible to use a file as comment for the ban, using
+# file = "file":
+# Kill
+# {
+# realname = "realnametoban";
+# file = "path/to/file/with/reason/to/show";
+# };
#
-# It is possible to use a file as comment for the ban.
-# K:<host/IP mask>:!<path to file>:<usermask>
#
# The default reason is: "You are banned from this server"
-# Note that K: lines are local to the server; if you ban a person or a
+# Note that Kill blocks are local to the server; if you ban a person or a
# whole domain from your server, they can get on IRC via any other server
-# that doesn't have them K: lined (yet).
+# that doesn't have them Killed (yet).
#
# With a simple comment, using quotes:
-K:*.au:"Please use a nearer server":*
-K:*.edu:"Please use a nearer server":*
-
-# With a file, prepending a '!' before the filename.
-# The file can contain for example, a reason, a link to the
-# server rules and a contact address.
-K:unixbox.flooder.co.uk:!kline/youflooded.txt:*luser
-
-#
-# IP-based kill lines are designated with a lowercase 'k'. These lines
-# use the same format as normal K: lines, except they apply to all hosts,
-# even if an IP address has a properly resolving host name.
-k:192.168.*:!klines/martians:*
+Kill { host = "*.au"; reason = "Please use a nearer server"; };
+Kill { host = "*.edu"; reason = "Please use a nearer server"; };
-# Additionally, you may specify a hostmask prefixed with $R to indicate
-# a match should be performed against the "real-name" / "info" field
-# instead of the host/IP.
-K:$R*sub7*:"You are infected with a Trojan":*
+# You can also kill based on username.
+Kill { username = "sub7"; realname = "s*7*"; reason = "You are infected with a Trojan"; };
-
-# [C:lines]
+# The file can contain for example, a reason, a link to the
+# server rules and a contact address. Note the combination
+# of username and host in the host field.
+Kill
+{
+ host = "*luser@unixbox.flooder.co.uk";
+ file = "kline/youflooded.txt";
+};
+
+# IP-based kill lines apply to all hosts, even if an IP address has a
+# properly resolving host name.
+Kill
+{
+ host = "192.168.*";
+ file = "klines/martians";
+};
+
+# The realname field lets you ban by realname...
+Kill
+{
+ realname = "*sub7*";
+ reason = "You are infected with a Trojan";
+};
+
+# [Connect]
#
# You probably want your server connected to other servers, so your users
# have other users to chat with.
# server links is provided for ircd to decide what links to allow, what
# to let humans do themselves, and what links to (forcefully) disallow.
#
-# The Connection lines (also known as C lines)
+# The Connect blocks
# define what servers the server connect to, and which servers are
# allowed to connect.
-# C:<remote hostname or IP>:<password>:<remote server name>:<port>:<class>
+# Connect {
+# name = "servername";
+# host = "hostnameORip";
+# vhost = "localIP";
+# password = "passwd";
+# port = portno;
+# class = "classname";
+# maxhops = 2;
+# hub = "*.eu.undernet.org";
+# autoconnect = no;
+# };
#
# The "port" field defines the default port the server tries to connect
# to if an operator uses /connect without specifying a port. This is also
-# the port used when the server attempts to auto-connect to the remote
-# server. (See Y:lines for more informationa about auto-connects).
+# the port used when the server attempts to auto-connect to the remote
+# server. (See Class blocks for more informationa about auto-connects).
+# You may tell ircu to not automatically connect to a server by adding
+# "autoconnect = no;"; the default is to autoconnect.
#
-# Our primary uplink.
-C:1.2.3.4:passwd:Amsterdam.NL.Eu.UnderNet.org:4400:90
-
-
-# [H:lines]
+# If the vhost field is present, the server will use that IP as the
+# local end of connections that it initiates to this server. This
+# overrides the vhost value from the General block.
#
-# If your server starts on a bit larger network, you'll probably get
-# assigned one or two uplinks to which your server can connect.
-# If your uplink(s) also connect to other servers than yours (which is
-# probable), you need to define your uplink as being allowed to "hub".
-# H:<allowed hostmask>::<server name>
-H:*.*::Amsterdam.NL.Eu.UnderNet.org
-
-
-# [L:lines]
+# The maxhops field causes an SQUIT if a hub tries to introduce
+# servers farther away than that; the element 'leaf;' is an alias for
+# 'maxhops = 0;'. The hub field limits the names of servers that may
+# be introduced by a hub; the element 'hub;' is an alias for
+# 'hub = "*";'.
#
-# Of course, the opposite is also possible: forcing a server to be
-# a leaf. L: lines follow Murphy's Law: if you use them, there's a big
-# chance that routing will be screwed up afterwards.
-# L:<opt disallowed hostmask>::<server mask>:<opt max depth>
-
+# Our primary uplink.
+Connect {
+ name = "Amsterdam.NL.Eu.UnderNet.org";
+ host = "1.2.3.4";
+ password = "passwd";
+ port = 4400;
+ class = "Server";
+ hub;
+};
-# [D:lines]
+# [crule]
#
# For an advanced, real-time rule-based routing decision making system
-# you can use Disallow lines. For more information, see doc/readme.crules.
-# D:<server mask that ircd will refuse to connect to>::<rule>
-# d:<server mask that ircd will not autoconnect to>::<rule>
-# D:*.US.UnderNet.org::connected(*.US.UnderNet.org)
-# d:*.EU.UnderNet.org::connected(Amsterdam.NL.EU.*)
-#
-# The following line is recommended for leaf servers:
-# d:*::directcon(*)
-
-
-# [O:lines]
+# you can use crule blocks. For more information, see doc/readme.crules.
+# If more than one server mask is present in a single crule, the rule
+# applies to all servers.
+# CRULE
+# {
+# server = "servermask";
+# rule = "connectrule";
+# # Setting all to yes makes the rule always apply. Otherwise it only
+# # applies to autoconnects.
+# all = yes;
+# };
+CRULE
+{
+ server = "*.US.UnderNet.org";
+ rule = "connected(*.US.UnderNet.org)";
+};
+CRULE
+{
+ server = "*.EU.UnderNet.org";
+ rule = "connected(Amsterdam.NL.EU.*)";
+};
+
+# The following block is recommended for leaf servers:
+CRULE
+{
+ server = "*";
+ rule = "directcon(*)";
+};
+
+# [Operator]
#
# Inevitably, you have reached the part about "IRC Operators". Oper status
# grants some special privileges to a user, like the power to make the
# can squit, connect and kill - but only locally: their +o user mode
# is not not passed along to other servers. On Undernet, this prevents
# them from using Uworld as well.
-# Depending on some defines in include/config.h, local operators are also
-# not allowed to /DIE and /RESTART the server.
-# Local operators are designated with a lowercase 'o'
-# O:<host/IP mask>:<encrypted password>:<Nick>::<connection class>
-# o:<host/IP mask>:<encrypted password>:<Nick>::<connection class>
#
-# The encrypted password is optional. If you wish to encrypt your password,
-# there is a utility in the ircd. Please read the file tools/README.
-O:*@*.cs.vu.nl:VRKLKuGKn0jLs:Niels::10
-o:*@*.uu.net:noncryptedpass:Braden::10
+# More than one host = "mask"; entry may be present in one block; this
+# has the same effect as one Operator block for each host entry, but
+# makes it easier to update operator nicks, passwords, classes, and
+# privileges.
+#
+# Operator {
+# host = "host/IP mask";
+# name = "opername";
+# password = "encryptedpass";
+# class = "classname";
+# # You can also set any operator privilege; see the Class block
+# # documentation for details. A privilege defined for a single
+# # Operator will override the privilege settings for the Class
+# # and the default setting.
+# };
+#
+# By default, the password is hashed using the system's native crypt()
+# function. Other password mechanisms are available; the umkpasswd
+# utility from the ircd directory can hash passwords using those
+# mechanisms. If you use a password format that is NOT generated by
+# umkpasswd, ircu will not recognize the oper's password.
+#
+# All privileges are shown with their default values; if you wish to
+# override defaults, you should set only those privileges for the
+# operator. Listing defaulted privileges just makes things harder to
+# find.
+Operator {
+ local = no;
+ host = "*@*.cs.vu.nl";
+ password = "VRKLKuGKn0jLt";
+ name = "Niels";
+ class = "Local";
+};
+Operator {
+ host = "*@*.uu.net";
+ password = "$PLAIN$notencryptedpass";
+ name = "Niels";
+ class = "Opers";
+};
# Note that the <connection class> is optional, but leaving it away
-# puts the O: lines in class 0, which usually only accepts one connection
-# at a time. If you want users to Oper up more then once per O: line,
-# then use a connection class that allows more then one connection,
-# for example (using class 10 as in the example above):
+# puts the opers in class "default", which usually only accepts one
+# connection at a time. If you want users to Oper up more then once per
+# block, then use a connection class that allows more then one connection,
+# for example (using class Local as in the example above):
#
# Once you OPER your connection class changes no matter where you are or
-# your previous connection classes. If the defined connection class is 10
-# for the O:line, then your new connection class is 10.
-# Y:10:90:0:100:160000
+# your previous connection classes. If the defined connection class is
+# Local for the operator block, then your new connection class is Local.
-
-# [P:lines]
+# [Port]
# When your server gets more full, you will notice delays when trying to
# connect to your server's primary listening port. It is possible via the
# Port lines to specify additional ports for the ircd to listen to.
# ports;
# Undernet uses 4400 for server listener ports.
# These are just hints, they are in no way official IANA or IETF policies.
-# IANA says we should use port 194, but that requires us to run as root, so
-# we don't do that.
-#
-# P:<hostmask>:<interface>:<[CS][H]>:<port number>
-#
-# The hostmask setting allows you to specify a range of IP addresses that
+# IANA says we should use port 194, but that requires us to run as root,
+# so we don't do that.
+#
+#
+# Port {
+# port = [ipv4] [ipv6] number;
+# mask = "ipmask";
+# # Use this to control the interface you bind to.
+# vhost = [ipv4] [ipv6] "virtualhostip";
+# # You can specify both virtual host and port number in one entry.
+# vhost = [ipv4] [ipv6] "virtualhostip" number;
+# # Setting to yes makes this server only.
+# server = yes;
+# # Setting to yes makes the port "hidden" from stats.
+# hidden = yes;
+# };
+#
+# The port and vhost lines allow you to specify one or both of "ipv4"
+# and "ipv6" as address families to use for the port. The default is
+# to listen on both IPv4 and IPv6.
+#
+# The mask setting allows you to specify a range of IP addresses that
# you will allow connections from. This should only contain IP addresses
# and '*' if used. This field only uses IP addresses. This does not use
# DNS in any way so you can't use it to allow *.nl or *.uk. Attempting
# If you want to use virtual hosting *YOU* *MUST* *USE* *THIS* otherwise it
# WILL bind to all interfaces - not what most people seem to expect.
#
-# The [CS][H] field is an optional field to specify that a port is a
-# server port or a client port and whether it's hidden or not.
-# If used the first character MUST be either a C or S.
-# If you want to hide a port from /stats p from non-opers follow the C
-# or S with an H
-#
-# C = Client (Ports 6660-6669)
-# S = Server (Port 4400)
-#
-# P:<hostmask>:<interface>:<[CS][H]>:<port number>
-#
-# This is a normal server port, you need to have at least one server
-# port defined if you want to connect your server to other servers.
-P:::S:4400
+Port {
+ server = yes;
+ port = 4400;
+};
-# This is a Server port that is Hidden
-#P:::SH:4401
+# This is an IPv4-only Server port that is Hidden
+Port {
+ server = yes;
+ hidden = yes;
+ port = ipv4 4401;
+};
# The following are normal client ports
-P:::C:6667
-P::::6668
-P:192.168.*:::6666
-
-# This is a hidden client port, listening on the interface associated
-# with the IP address 168.8.21.107
-#P:*:168.8.21.107:CH:7000
-
-
-# [F:lines]
-#
+Port { port = 6667; };
+Port { port = 6668; };
+Port {
+ # This only accepts clients with IPs like 192.168.*.
+ mask = "192.168.*";
+ port = 6666;
+};
+
+# This is a hidden client port, listening on 168.8.21.107.
+Port {
+ vhost = "168.8.21.107";
+ hidden = yes;
+ port = 7000;
+};
+
+# More than one vhost may be present in a single Port block; in this case,
+# we recommend listing the port number on the vhost line for clarity.
+Port {
+ vhost = "172.16.0.1" 6667;
+ vhost = "172.16.3.1" 6668;
+ hidden = no;
+};
+
+# Quarantine blocks disallow operators from using OPMODE and CLEARMODE
+# on certain channels. Opers with the force_opmode (for local
+# channels, force_local_opmode) privilege may override the quarantine
+# by prefixing the channel name with an exclamation point ('!').
+# Wildcards are NOT supported; the channel name must match exactly.
+Quarantine {
+ "#shells" = "Thou shalt not support the h4><0rz";
+ "&kiddies" = "They can take care of themselves";
+};
+
+# This is a server-implemented alias to send a message to a service.
+# The string after Pseudo is the command name; the name entry inside
+# is the service name, used for error messages. More than one nick
+# entry can be provided; the last one listed has highest priority.
+Pseudo "CHANSERV" {
+ name = "X";
+ nick = "X@channels.undernet.org";
+};
+
+# You can also prepend text before the user's message.
+Pseudo "LOGIN" {
+ name = "X";
+ prepend = "LOGIN ";
+ nick = "X@channels.undernet.org";
+};
+
+# You can ask a separate server whether to allow users to connect.
+# Uncomment this ONLY if you have an iauth helper program.
+# IAuth {
+# program = "../path/to/iauth" "-n" "options go here";
+# };
+
+# [features]
# IRC servers have a large number of options and features. Most of these
# are set at compile time through the use of #define's--see "make config"
# for more details--but we are working to move many of these into the
-# configuration file. Feature lines are the hook we're using for this.
-# F:<Option>:<Value>
+# configuration file. Features let you configure these at runtime.
+# You only need one feature block in which you use
+# "featurename" = "value1" , "value2", ..., "valuen-1", "valuen";
#
# The entire purpose of F:lines are so that you do not have to recompile
# the IRCD everytime you want to change a feature. All of the features
# found at doc/readme.log. The defaults used by the Undernet network are
# below.
#
-# F:DOMAINNAME:<obtained from /etc/resolv.conf by ./configure>
-# F:RELIABLE_CLOCK:FALSE
-# F:BUFFERPOOL:27000000
-# F:HAS_FERGUSON_FLUSHER:FALSE
-# F:CLIENT_FLOOD:1024
-# F:SERVER_PORT:4400
-# F:NODEFAULTMOTD:TRUE
-# F:KILL_IPMISMATCH:FALSE
-# F:IDLE_FROM_MSG:TRUE
-# F:HUB:FALSE
-# F:WALLOPS_OPER_ONLY:FALSE
-# F:NODNS:FALSE
-# F:RANDOM_SEED:<you should set one explicitly>
-# F:DEFAULT_LIST_PARAM
-# F:NICKNAMEHISTORYLENGTH:800
-# F:KILLCHASETIMELIMIT:30
-# F:MAXCHANNELSPERUSER:10
-# F:AVBANLEN:40
-# F:MAXBANS:30
-# F:MAXSILES:15
-# F:HANGONGOODLINK:300
-# F:HANGONRETRYDELAY:10
-# F:CONNECTTIMEOUT:90
-# F:TIMESEC:60
-# F:MAXIMUM_LINKS:1
-# F:PINGFREQUENCY:120
-# F:CONNECTFREQUENCY:600
-# F:DEFAULTMAXSENDQLENGTH:40000
-# F:MPATH:ircd.motd
-# F:RPATH:remote.motd
-# F:PPATH:ircd.pid
-# F:VIRTUAL_HOST:FALSE
-# F:TOS_SERVER:0x08
-# F:TOS_CLIENT:0x08
-# F:CRYPT_OPER_PASSWORD:TRUE
-# F:OPER_NO_CHAN_LIMIT:TRUE
-# F:OPER_MODE_LCHAN:TRUE
-# F:OPER_WALK_THROUGH_LMODES:FALSE
-# F:NO_OPER_DEOP_LCHAN:FALSE
-# F:SHOW_INVISIBLE_USERS:TRUE
-# F:SHOW_ALL_INVISIBLE_USERS:TRUE
-# F:UNLIMIT_OPER_QUERY:FALSE
-# F:LOCAL_KILL_ONLY:FALSE
-# F:CONFIG_OPERCMDS:FALSE
-# F:OPER_KILL:TRUE
-# F:OPER_REHASH:TRUE
-# F:OPER_RESTART:TRUE
-# F:OPER_DIE:TRUE
-# F:OPER_GLINE:TRUE
-# F:OPER_LGLINE:TRUE
-# F:OPER_JUPE:TRUE
-# F:OPER_LJUPE:TRUE
-# F:OPER_OPMODE:TRUE
-# F:OPER_LOPMODE:TRUE
-# F:OPER_BADCHAN:FALSE
-# F:OPER_LBADCHAN:FALSE
-# F:OPER_SET:TRUE
-# F:OPERS_SEE_IN_SECRET_CHANNELS:TRUE
-# F:LOCOP_KILL:TRUE
-# F:LOCOP_REHASH:TRUE
-# F:LOCOP_RESTART:FALSE
-# F:LOCOP_DIE:FALSE
-# F:LOCOP_LGLINE:TRUE
-# F:LOCOP_LJUPE:TRUE
-# F:LOCOP_LOPMODE:TRUE
-# F:LOCOP_LBADCHAN:FALSE
-# F:LOCOP_SET:FALSE
-# F:LOCOP_SEE_IN_SECRET_CHANNELS:FALSE
-
+features
+{
+# These log features are the only way to get certain error messages
+# (such as when the server dies from being out of memory). For more
+# explanation of how they work, see doc/readme.log.
+ "LOG" = "SYSTEM" "FILE" "ircd.log";
+ "LOG" = "SYSTEM" "LEVEL" "CRIT";
+# "DOMAINNAME"="<obtained from /etc/resolv.conf by ./configure>";
+# "RELIABLE_CLOCK"="FALSE";
+# "BUFFERPOOL"="27000000";
+# "HAS_FERGUSON_FLUSHER"="FALSE";
+# "CLIENT_FLOOD"="1024";
+# "SERVER_PORT"="4400";
+# "NODEFAULTMOTD"="TRUE";
+# "MOTD_BANNER"="TRUE";
+# "KILL_IPMISMATCH"="FALSE";
+# "IDLE_FROM_MSG"="TRUE";
+# "HUB"="FALSE";
+# "WALLOPS_OPER_ONLY"="FALSE";
+# "NODNS"="FALSE";
+# "RANDOM_SEED"="<you should set one explicitly>";
+# "DEFAULT_LIST_PARAM"="TRUE";
+# "NICKNAMEHISTORYLENGTH"="800";
+# "NETWORK"="UnderNet";
+# "HOST_HIDING"="FALSE";
+# "HIDDEN_HOST"="users.undernet.org";
+# "HIDDEN_IP"="127.0.0.1";
+# "KILLCHASETIMELIMIT"="30";
+# "MAXCHANNELSPERUSER"="10";
+# "NICKLEN" = "12";
+# "AVBANLEN"="40";
+# "MAXBANS"="30";
+# "MAXSILES"="15";
+# "HANGONGOODLINK"="300";
+# "HANGONRETRYDELAY" = "10";
+# "CONNECTTIMEOUT" = "90";
+# "MAXIMUM_LINKS" = "1";
+# "PINGFREQUENCY" = "120";
+# "CONNECTFREQUENCY" = "600";
+# "DEFAULTMAXSENDQLENGTH" = "40000";
+# "GLINEMAXUSERCOUNT" = "20";
+# "MPATH" = "ircd.motd";
+# "RPATH" = "remote.motd";
+# "PPATH" = "ircd.pid";
+# "TOS_SERVER" = "0x08";
+# "TOS_CLIENT" = "0x08";
+# "POLLS_PER_LOOP" = "200";
+# "IRCD_RES_TIMEOUT" = "4";
+# "IRCD_RES_RETRIES" = "2";
+# "AUTH_TIMEOUT" = "9";
+# "IPCHECK_CLONE_LIMIT" = "4";
+# "IPCHECK_CLONE_PERIOD" = "40";
+# "IPCHECK_CLONE_DELAY" = "600";
+# "CHANNELLEN" = "200";
+# "CONFIG_OPERCMDS" = "FALSE";
+# "OPLEVELS" = "TRUE";
+# "ZANNELS" = "TRUE";
+# "LOCAL_CHANNELS" = "TRUE";
+# "ANNOUNCE_INVITES" = "FALSE";
+# These were introduced by Undernet CFV-165 to add "Head-In-Sand" (HIS)
+# behavior to hide most network topology from users.
+# "HIS_SNOTICES" = "TRUE";
+# "HIS_SNOTICES_OPER_ONLY" = "TRUE";
+# "HIS_DEBUG_OPER_ONLY" = "TRUE";
+# "HIS_WALLOPS" = "TRUE";
+# "HIS_MAP" = "TRUE";
+# "HIS_LINKS" = "TRUE";
+# "HIS_TRACE" = "TRUE";
+# "HIS_STATS_a" = "TRUE";
+# "HIS_STATS_c" = "TRUE";
+# "HIS_STATS_d" = "TRUE";
+# "HIS_STATS_e" = "TRUE";
+# "HIS_STATS_f" = "TRUE";
+# "HIS_STATS_g" = "TRUE";
+# "HIS_STATS_i" = "TRUE";
+# "HIS_STATS_j" = "TRUE";
+# "HIS_STATS_J" = "TRUE";
+# "HIS_STATS_k" = "TRUE";
+# "HIS_STATS_l" = "TRUE";
+# "HIS_STATS_L" = "TRUE";
+# "HIS_STATS_m" = "TRUE";
+# "HIS_STATS_M" = "TRUE";
+# "HIS_STATS_o" = "TRUE";
+# "HIS_STATS_p" = "TRUE";
+# "HIS_STATS_q" = "TRUE";
+# "HIS_STATS_r" = "TRUE";
+# "HIS_STATS_R" = "TRUE";
+# "HIS_STATS_t" = "TRUE";
+# "HIS_STATS_T" = "TRUE";
+# "HIS_STATS_u" = "FALSE";
+# "HIS_STATS_U" = "TRUE";
+# "HIS_STATS_v" = "TRUE";
+# "HIS_STATS_w" = "TRUE";
+# "HIS_STATS_x" = "TRUE";
+# "HIS_STATS_y" = "TRUE";
+# "HIS_STATS_z" = "TRUE";
+# "HIS_STATS_IAUTH" = "TRUE";
+# "HIS_WHOIS_SERVERNAME" = "TRUE";
+# "HIS_WHOIS_IDLETIME" = "TRUE";
+# "HIS_WHOIS_LOCALCHAN" = "TRUE";
+# "HIS_WHO_SERVERNAME" = "TRUE";
+# "HIS_WHO_HOPCOUNT" = "TRUE";
+# "HIS_MODEWHO" = "TRUE";
+# "HIS_BANWHO" = "TRUE";
+# "HIS_KILLWHO" = "TRUE";
+# "HIS_REWRITE" = "TRUE";
+# "HIS_REMOTE" = "TRUE";
+# "HIS_NETSPLIT" = "TRUE";
+# "HIS_SERVERNAME" = "*.undernet.org";
+# "HIS_SERVERINFO" = "The Undernet Underworld";
+# "HIS_URLSERVERS" = "http://www.undernet.org/servers.php";
+# "URLREG" = "http://cservice.undernet.org/live/";
+};
# Well, you have now reached the end of this sample configuration
# file. If you have any questions, feel free to mail