# connectfreq = time;
# maxlinks = number;
# sendq = size;
+# usermode = "+i";
# };
#
# <connect freq> applies only to servers, and specifies the frequency
pingfreq = 1 minutes 30 seconds;
sendq = 160000;
maxlinks = 100;
+ usermode = "+iw";
};
Client
{
sendq = 160000;
maxlinks = 400;
};
+Class {
+ name = "Opers";
+ pingfreq = 1 minutes 30 seconds;
+ sendq = 160000;
+ maxlinks = 10;
+
+ # For connection classes intended for operator use, you can specify
+ # privileges used when the Operator block (see below) names this
+ # class. The local (aka globally_opered) privilege MUST be defined
+ # by either the Class or Operator block. The following privileges
+ # exist:
+ #
+ # local (or propagate, with the opposite sense)
+ # whox (can use x flag with /WHO)
+ # display (oper status visible to lusers)
+ # chan_limit (can join local channels when in
+ # MAXCHANNELSPERUSER channels)
+ # mode_lchan (can /MODE &channel without chanops)
+ # deop_lchan (cannot be deopped or kicked on local channels)
+ # walk_lchan (can forcibly /JOIN &channel OVERRIDE)
+ # show_invis (see +i users in /WHO x)
+ # show_all_invis (see +i users in /WHO x)
+ # unlimit_query (show more results from /WHO)
+ # local_kill (can kill clients on this server)
+ # rehash (can use /REHASH)
+ # die (can use /DIE)
+ # local_jupe_server (not used)
+ # set (can use /SET)
+ # local_gline (can set a G-line for this server only)
+ # local_badchan (can set a Gchan for this server only)
+ # see_chan (can see users in +s channels in /WHO)
+ # wide_gline (can use ! to force a wide G-line)
+ # see_opers (can see opers without DISPLAY privilege)
+ # force_local_opmode (can use OPMODE/CLEARMODE on quarantined local channels)
+ # kill (can kill clients on other servers)
+ # gline (can issue G-lines to other servers)
+ # jupe_server (not used)
+ # opmode (can use /OPMODE)
+ # badchan (can issue Gchans to other servers)
+ # force_opmode (can use OPMODE/CLEARMODE on quarantined global channels)
+ #
+ # For global opers (with propagate = yes or local = no), the default
+ # is to grant all of the above privileges. For local opers, the
+ # default is to grant ONLY the following privileges:
+ # chan_limit, mode_lchan, show_invis, show_all_invis, local_kill,
+ # rehash, local_gline, local_jupe, local_opmode, whox, display,
+ # force_local_opmode
+ # Any privileges listed in a Class block override the defaults.
+ local = no;
+};
# [Client]
#
# To allow clients to connect, they need authorization. This can be
# mask = "servermask";
# # No is assumed for these unless you set it to yes.
# uworld = no;
-# leaf = no;
-# hub = yes;
+# hub = no;
+# # Yes is assumed for "leaf" unless you set it to no.
+# leaf = yes;
# };
#
# Note: (1) These lines are agreed on by every server admin on Undernet;
# can squit, connect and kill - but only locally: their +o user mode
# is not not passed along to other servers. On Undernet, this prevents
# them from using Uworld as well.
-# Depending on some defines in include/config.h, local operators are also
-# not allowed to /DIE and /RESTART the server.
+#
# Operator {
-# local = no;
# host = "host/IP mask";
# name = "opername";
# password = "encryptedpass";
# class = "classname";
+# # You can also set any operator privilege; see the Class block
+# # documentation for details. A privilege defined for a single
+# # Operator will override the privilege settings for the Class
+# # and the default setting.
# };
#
-# The encrypted password is optional. If you wish to encrypt your password,
-# there is a utility in the ircd. Please read the file tools/README.
+# The encrypted password is optional. If you wish to encrypt your
+# password, there is a utility in the ircd. Please read the file
+# tools/README.
+# All privileges are shown with their default values; if you wish to
+# override defaults, you should set only those privileges for the
+# operator. Listing defaulted privileges just makes things harder to
+# find.
Operator {
local = no;
host = "*@*.cs.vu.nl";
class = "Local";
};
Operator {
- local = yes;
host = "*@*.uu.net";
password = "notencryptedpass";
name = "Niels";
- class = "Local";
+ class = "Opers";
};
# Note that the <connection class> is optional, but leaving it away
port = 7000;
};
+# This is a server-implemented alias to send a message to a service.
+# The string after Pseudo is the command name; the name entry inside
+# is the service name, used for error messages. More than one nick
+# entry can be provided; the last one listed has highest priority.
+Pseudo "CHANSERV" {
+ name = "X";
+ nick = "X@channels.undernet.org";
+};
+
+# You can also prepend text before the user's message.
+Pseudo "LOGIN" {
+ name = "X";
+ prepend = "LOGIN ";
+ nick = "X@channels.undernet.org";
+};
+
+# You can ask a separate server whether to allow users to connect.
+IAuth {
+ pass = "ircd-iauth";
+ host = "127.0.0.1";
+ port = 7700;
+ connectfreq = 30;
+ timeout = 60;
+};
+
# [features]
# IRC servers have a large number of options and features. Most of these
# are set at compile time through the use of #define's--see "make config"
# "HIDDEN_IP"="127.0.0.1";
# "KILLCHASETIMELIMIT"="30";
# "MAXCHANNELSPERUSER"="10";
+# "NICKLEN" = "12";
# "AVBANLEN"="40";
# "MAXBANS"="30";
# "MAXSILES"="15";
# "HANGONGOODLINK="300";
# "HANGONRETRYDELAY" = "10";
# "CONNECTTIMEOUT" = "90";
-# "TIMESEC" = "60";
# "MAXIMUM_LINKS" = "1";
# "PINGFREQUENCY" = "120";
# "CONNECTFREQUENCY" = "600";
# "TOS_SERVER" = "0x08";
# "TOS_CLIENT" = "0x08";
# "POLLS_PER_LOOP" = "200";
-# "CRYPT_OPER_PASSWORD" = "TRUE";
-# "OPER_NO_CHAN_LIMIT" = "TRUE";
-# "OPER_MODE_LCHAN" = "TRUE";
-# "OPER_WALK_THROUGH_LMODES" = "FALSE";
-# "NO_OPER_DEOP_LCHAN" = "FALSE";
-# "SHOW_INVISIBLE_USERS" = "TRUE";
-# "SHOW_ALL_INVISIBLE_USERS" = "TRUE";
-# "UNLIMIT_OPER_QUERY" = "FALSE";
-# "LOCAL_KILL_ONLY" = "FALSE";
+# "IRCD_RES_TIMEOUTS" = "4";
+# "IRCD_RES_RETRIES" = "2";
+# "AUTH_TIMEOUT" = "9";
+# "IPCHECK_CLONE_LIMIT" = "4";
+# "IPCHECK_CLONE_PERIOD" = "40";
+# "IPCHECK_CLONE_DELAY" = "600";
# "CONFIG_OPERCMDS" = "FALSE";
-# "OPER_KILL" = "TRUE";
-# "OPER_REHASH" = "TRUE";
-# "OPER_RESTART" = "TRUE";
-# "OPER_DIE" = "TRUE";
-# "OPER_GLINE" = "TRUE";
-# "OPER_LGLINE" = "TRUE";
-# "OPER_JUPE" = "TRUE";
-# "OPER_LJUPE" = "TRUE";
-# "OPER_OPMODE" = "TRUE";
-# "OPER_LOPMODE" = "TRUE";
-# "OPER_BADCHAN" = "FALSE";
-# "OPER_LBADCHAN" = "FALSE";
-# "OPER_SET" = "FALSE";
-# "OPERS_SEE_IN_SECRET_CHANNELS" = "TRUE";
-# "OPER_WIDE_GLINE" = "TRUE";
-# "OPER_LIST_CHAN" = "TRUE";
-# "LOCOP_KILL" = "TRUE";
-# "LOCOP_REHASH" = "TRUE";
-# "LOCOP_RESTART" = "FALSE";
-# "LOCOP_DIE" = "FALSE";
-# "LOCOP_LGLINE" = "TRUE";
-# "LOCOP_LJUPE" = "TRUE";
-# "LOCOP_LOPMODE" = "TRUE";
-# "LOCOP_LBADCHAN" = "FALSE";
-# "LOCOP_SET" = "FALSE";
-# "LOCOP_SEE_IN_SECRET_CHANNELS" = "FALSE";
-# "LOCOP_WIDE_GLINE" = "FALSE";
-# "LOCOP_LIST_CHAN" = "FALSE";
+# "OPLEVELS" = "TRUE";
+# "LOCAL_CHANNELS" = "TRUE";
+# "ANNOUNCE_INVITES" = "FALSE";
};
# Well, you have now reached the end of this sample configuration
projects / ircu2.10.12-pk.git / blobdiff