3 # By Carlo Wood (carlo@runaway.xs4all.nl)
5 # For a description of the syntax of this configuration file,
6 # see the config/Configure script.
8 # TO CONFIGURE THE SERVER, TYPE: 'make config' in the top level directory !
11 #### Start of system configuration section. ####
14 exec_prefix=@exec_prefix@
18 CFLAGS_DEFAULT="@CFLAGS@"
19 CPPFLAGS_DEFAULT="@CPPFLAGS@"
20 LDFLAGS_DEFAULT="@LDFLAGS@"
22 ac_cv_header_poll_h=@ac_cv_header_poll_h@
23 unet_cv_func_poll_syscall=@unet_cv_func_poll_syscall@
24 ac_cv_header_syslog_h=@ac_cv_header_syslog_h@
26 #### End of system configuration section. ####
28 if [ -z "$CONFIG_BATCH" ]; then
29 echo "**************************************************************************"
30 echo "Error: Please run 'make config' that resides in the top level directory!"
31 echo "**************************************************************************"
35 mainmenu_name "Undernet IRC Daemon Configuration"
36 mainmenu_option next_comment
37 if [ "$CONFIG_BATCH" = "n" ]; then
38 echo "* Welcome to the Undernet IRC Daemon Configuration script."
39 echo "* You can restart this configuration at any time by typing 'make config'."
40 echo "* If you need help with your decision on any question, type a '?'"
47 if [ "$DEFAULTS" != "none" ]; then
48 bool 'Do you want to change your previous configuration' CHANGE_CONFIG
49 if [ "$CHANGE_CONFIG" = "n" ]; then
50 echo "Ok, I will only prompt you for NEW parameters."
60 mainmenu_option next_comment
61 comment 'Compile stuff'
62 if [ "$prefix" = "NONE" ]; then
65 if [ "$exec_prefix" = "NONE" ]; then
66 eval exec_prefix="$prefix"
68 string 'Which compiler do you want to use' CC "$CC_DEFAULT"
69 echo "* For the following four questions, specify 'none' when you want it to be empty."
70 if [ -z "$cflags_O3_remark" -a -n "$CFLAGS" ]; then
71 CFLAGS_DEFAULT=`echo "$CFLAGS" | sed -e 's%-O2%-O3%'`
72 if [ "$CFLAGS_DEFAULT" != "$CFLAGS" ]; then
73 echo "You are highly advised to use -O3 instead of -O2 if you're short in cpu cycles!"
74 echo "Please read documentation (press '?'):"
78 eval string "'What flags should I pass to $CC [none]'" CFLAGS "'$CFLAGS_DEFAULT'"
79 define_macro cflags_O3_remark done
80 string 'Do you need extra include directories [none]' EXTRA_INCLUDEDIRS none
81 if [ -z "$LDFLAGS_DEFAULT" ]; then
84 eval LDFLAGS_DEFAULT="$LDFLAGS_DEFAULT"
86 string 'Which linker flags do you need [none]' LDFLAGS "$LDFLAGS_DEFAULT"
87 if [ -z "$LIBS" ]; then
90 string 'Which extra libraries do you need [none]' IRCDLIBS "$LIBS"
92 string 'In which directory should I install the ircd binary' BINDIR $bindir
93 if [ ! -d "$BINDIR" ]; then
94 echo "$BINDIR : No such directory"
96 string 'What should the name of the installed symbolic link to the exectuable be' SYMLINK ircd
97 string 'Which permissions do you want the binary to have' IRCDMODE 711
98 string 'Which owner do you want the binary to have' IRCDOWN "`id | sed -e 's/.*uid=[0-9]*(//' -e 's/).*//' 2> /dev/null`"
99 string 'Which group do you want the binary to have' IRCDGRP "`id | sed -e 's/.*gid=[0-9]*(//' -e 's/).*//' 2> /dev/null`"
101 string 'Where should I install the man page' MANDIR $mandir
102 if [ "$CFLAGS" = "none" ]; then
105 if [ "$EXTRA_INCLUDEDIRS" = "none" ]; then
108 if [ "$LDFLAGS" = "none" ]; then
111 if [ "$IRCDLIBS" = "none" ]; then
115 if [ -n "$EXTRA_INCLUDEDIRS" ]; then
116 for i in $EXTRA_INCLUDEDIRS; do
117 if [ -z "$EXTRA_CPPFLAGS" ]; then
120 EXTRA_CPPFLAGS="$EXTRA_CPPFLAGS -I$i"
124 if [ -z "$EXTRA_CPPFLAGS" ]; then
125 CPPFLAGS=-I../include
127 CPPFLAGS="-I../include $EXTRA_CPPFLAGS"
129 echo "EXTRA_CPPFLAGS=\"$EXTRA_CPPFLAGS\"" >>$CONFIG
130 echo "CPPFLAGS=\"$CPPFLAGS\"" >>$CONFIG
131 bool 'Use inlining for a few crucial functions' FORCEINLINE y
134 if [ "$ac_cv_header_poll_h" = "yes" ]; then
135 if [ "$unet_cv_func_poll_syscall" = "yes" ]; then
136 define_bool USE_POLL y
138 mainmenu_option next_comment
139 comment 'Operating System specific defines.'
140 bool 'You have poll(), but do you want to use it' USE_POLL n
145 mainmenu_option next_comment
146 comment 'Host specific defines'
147 if [ -f /etc/resolv.conf ]; then
148 DOMAINNAME_DEFAULT="`awk '/^domain/ { print $2; exit }' /etc/resolv.conf`"
150 string 'What is the domain name of your network' DOMAINNAME $DOMAINNAME_DEFAULT
151 if [ -z "$DOMAINNAME" ]; then
154 string 'Please give a random seed of eight characters' RANDOM_SEED 12345678
155 bool 'Does your host have a reliable clock' RELIABLE_CLOCK
158 mainmenu_option next_comment
159 comment 'General defines'
160 bool 'Change root ('/') after start of daemon' CHROOTDIR
161 bool 'Do you want the daemon set its own uid/gid' CONFIG_SETUGID
162 if [ "$CONFIG_SETUGID" = "y" ]; then
163 int ' UID of irc daemon' IRC_UID
164 int ' GID of irc daemon' IRC_GID
166 define_int IRC_UID $IRC_UID
167 define_int IRC_GID $IRC_GID
168 bool 'Allow to specify configuration file on command line' CMDLINE_CONFIG
169 if [ "$CMDLINE_CONFIG" = "y" ]; then
170 echo " SECURITY: Then don't install the daemon SUID or SGID !"
173 bool 'Set up a Unix domain socket to connect clients/servers' UNIXPORT
175 bool 'Will you connect to more then one server at a time' HUB
176 if [ "$PREV_HUB" != "$HUB" ]; then
181 mainmenu_option next_comment
182 comment 'Debugging (do not define this on production servers)'
183 bool 'Do you want to enable debugging output' DEBUGMODE
184 bool 'Do you want memory- allocation and/or leak checking' DEBUGMALLOC
185 if [ "$DEBUGMALLOC" = "y" ]; then
186 bool 'Do you want to have boundary checking' MEMMAGICNUMS
187 bool 'Do you want memory leak testing (stats M)' MEMLEAKSTATS y
188 if [ "$MEMLEAKSTATS" = "y" ]; then
189 if [ "$MEMMAGICNUMS" = "y" ]; then
190 echo "You will have extra info on allocated sizes too (MEMSIZESTATS)"
191 define_bool MEMSIZESTATS $MEMSIZESTATS
193 bool 'Do you want extra info on allocated sizes' MEMSIZESTATS y
195 bool 'Do you want support for a time interval with /stats M' MEMTIMESTATS y
198 define_bool MEMMAGICNUMS $MEMMAGICNUMS
199 define_bool MEMLEAKSTATS $MEMLEAKSTATS
200 define_bool MEMSIZESTATS $MEMSIZESTATS
201 define_bool MEMTIMESTATS $MEMTIMESTATS
205 mainmenu_option next_comment
206 comment 'Paths and files'
207 eval DPATH_DEFAULT="${prefix}/lib/ircd"
208 string 'Directory where all ircd stuff resides' DPATH $DPATH_DEFAULT
209 define_string SPATH "$BINDIR/$SYMLINK"
210 echo "The following filenames are either full paths or files within DPATH"
211 string 'Server configuration file' CPATH 'ircd.conf'
212 string 'Server MOTD file' MPATH 'ircd.motd'
213 string 'Server remote MOTD file (3 lines max)' RPATH 'remote.motd'
214 if [ "$DEBUGMODE" = "y" ]; then
215 string 'Debug file if DEBUGMODE' LPATH '/tmp/ircd.log'
217 define_string LPATH "$LPATH"
219 string 'File for server pid' PPATH 'ircd.pid'
222 mainmenu_option next_comment
223 comment 'Logging (filenames are either full paths or files within DPATH)'
224 bool 'Do you want to log the use of /WHO x% (recommended)' CONFIG_LOG_WHOX y
225 if [ "$CONFIG_LOG_WHOX" = "y" ]; then
226 string ' Give the path and(or) filename of this log file' WPATH 'whox.log'
229 comment 'Bad Channel G-Lines allow operators to add channel masks to a list which prohibits local clients from being able joining channels which match the mask. Remote BadChan Glines allow Uworld to add or remove channels from the servers internal list of badchans'
230 bool 'Do you want to enable Bad Channel G-lines' BADCHAN y
231 if [ "$BADCHAN" = "y" ]; then
233 echo " WARNING DO _NOT_ USE LOCAL BADCHANNEL GLINES ON UNDERNET"
234 echo " Use of LOCAL BAD Channel G-Lines can be cause for REMOVAL"
235 bool 'Allow LOCAL BAD Channel G-lines' LOCAL_BADCHAN
238 bool 'Do you want to log G-lines to a separate file' CONFIG_LOG_GLINES
239 if [ "$CONFIG_LOG_GLINES" = "y" ]; then
240 string ' Give the path and(or) filename of this log file' GPATH 'gline.log'
242 bool 'Do you want to log connecting users to a separate file' CONFIG_LOG_USERS
243 if [ "$CONFIG_LOG_USERS" = "y" ]; then
244 string ' Give the path and(or) filename of this log file' FNAME_USERLOG $DPATH/users
246 bool 'Do you want to log Opers to a separate file' CONFIG_LOG_OPERS
247 if [ "$CONFIG_LOG_OPERS" = "y" ]; then
248 string ' Give the path and(or) filename of this log file' FNAME_OPERLOG $DPATH/opers
250 if [ "$ac_cv_header_syslog_h" = "yes" ]; then
251 bool 'Do you want to use syslog' USE_SYSLOG
255 if [ "$USE_SYSLOG" = "y" ]; then
256 bool ' Log all operator kills to syslog' SYSLOG_KILL
257 bool ' Log all remote squits for all servers to syslog' SYSLOG_SQUIT
258 bool ' Log remote connect messages for other all servs' SYSLOG_CONNECT
259 bool ' Log all users who successfully become an Oper' SYSLOG_OPER
260 bool ' Send userlog stuff to syslog' SYSLOG_USERS
261 if [ "$SYSLOG_KILL" = "n" -a "$SYSLOG_SQUIT" = "n" -a \
262 "$SYSLOG_CONNECT" = "n" -a "$SYSLOG_OPER" = "n" -a \
263 "$SYSLOG_USERS" = "n" ]; then
264 define_macro LOG_FACILITY $LOG_FACILITY
265 define_bool USE_SYSLOG n
267 choice ' Log facility' \
268 "daemon CONFIG_DAEMON \
270 local0-7 CONFIG_LOCAL" daemon
271 if [ "$CONFIG_DAEMON" = "y" ]; then
272 define_macro LOG_FACILITY LOG_DAEMON
274 if [ "$CONFIG_USER" = "y" ]; then
275 define_macro LOG_FACILITY LOG_USER
277 int ' Which local facility (0-7)' INT_LOCAL
278 define_macro LOG_FACILITY LOG_LOCAL$INT_LOCAL
281 echo " Using log facility $LOG_FACILITY"
284 define_bool SYSLOG_KILL $SYSLOG_KILL
285 define_bool SYSLOG_SQUIT $SYSLOG_SQUIT
286 define_bool SYSLOG_CONNECT $SYSLOG_CONNECT
287 define_bool SYSLOG_OPER $SYSLOG_OPER
288 define_bool SYSLOG_USERS $SYSLOG_USERS
289 define_macro LOG_FACILITY $LOG_FACILITY
293 mainmenu_option next_comment
294 comment 'Configuration'
295 bool 'Use crypted passwords for N: lines' CRYPT_LINK_PASSWORD y
296 bool 'Use crypted passwords for operators' CRYPT_OPER_PASSWORD y
297 DUMMY=`echo "$BUFFERPOOL" | sed -e 's/[0-9]//g'`
298 if [ "$DUMMY" != "" ]; then
301 if [ "$HUB" = "y" ]; then
302 int 'Max size of the total of of all sendqs (bytes)' BUFFERPOOL 27000000
304 int 'Max size of the total of of all sendqs (bytes)' BUFFERPOOL 9000000
306 int 'Max receive queue for clients (bytes)' CLIENT_FLOOD 1024
307 int 'Maximum number of network connections (23 - (FD_SETSIZE-4))' MAXCONNECTIONS 252
308 int 'Default client listen port' PORTNUM 6667
309 int 'Nickname history length' NICKNAMEHISTORYLENGTH 800
310 bool 'Allow Opers to see (dis)connects of local clients' ALLOW_SNO_CONNEXIT
311 if [ "$ALLOW_SNO_CONNEXIT" = "y" ]; then
312 bool 'Show IP address in client connection notices' SNO_CONNEXIT_IP
314 bool 'Do you want to use R: lines in your configuration file' R_LINES
315 if [ "$R_LINES" = "y" ]; then
316 bool 'Process R: lines every rehash' R_LINES_REHASH y
317 bool 'Process R: lines always' R_LINES_OFTEN
319 define_bool R_LINES_REHASH $R_LINES_REHASH
320 define_bool R_LINES_OFTEN $R_LINES_OFTEN
322 bool 'Do you want support for the old I:*:ONE:*:: construct (read help text!)' USEONE n
323 bool 'Send a short message instead of the MOTD to connecting clients' NODEFAULTMOTD y
326 mainmenu_option next_comment
327 comment 'Oper commands'
328 bool 'Allow (local) Opers to see all local invisible users' SHOW_INVISIBLE_USERS y
329 if [ "$SHOW_INVISIBLE_USERS" = "y" ]; then
330 bool 'Allow Opers to see all invisible users' SHOW_ALL_INVISIBLE_USERS y
332 bool 'Allow global Opers (O:) to see inside secret channels' OPERS_SEE_IN_SECRET_CHANNELS y
333 if [ "$OPERS_SEE_IN_SECRET_CHANNELS" = "y" ]; then
334 bool 'Allow local Opers (o:) to see inside secret channels' LOCOP_SEE_IN_SECRET_CHANNELS n
336 bool 'Do not truncate obnoxiously long /who output for opers' UNLIMIT_OPER_QUERY
337 bool 'Allow Opers to use the KILL command' OPER_KILL y
338 bool 'Allow Opers to use the REHASH command' OPER_REHASH y
339 bool 'Allow Opers to use the RESTART command' OPER_RESTART y
340 bool 'Allow Opers to use the DIE command' OPER_DIE y
341 bool 'Allow Opers to add local G-lines' OPER_LGLINE y
342 bool 'Allow Opers to connect from a remote site' OPER_REMOTE y
343 bool 'Allow local opers to use the REHASH command' LOCOP_REHASH y
344 bool 'Allow local opers to use the RESTART command' LOCOP_RESTART
345 bool 'Allow local opers to use the DIE command' LOCOP_DIE
346 bool 'Allow local opers to add local G-lines' LOCOP_LGLINE y
347 bool 'Allow local/global opers to be on any number of channels' OPER_NO_CHAN_LIMIT y
348 bool 'Allow local/global opers to set modes on local channels' OPER_MODE_LCHAN y
349 bool 'Allow local/global opers to walk through local channels modes' OPER_WALK_THROUGH_LMODES n
350 bool 'Prevent local/global opers from being kicked or deoped on local channels' NO_OPER_DEOP_LCHAN n
353 mainmenu_option next_comment
354 comment 'Server characteristics'
355 bool 'Do you want to have a default LIST parameter' CONFIG_LIST y
356 if [ "$CONFIG_LIST" = "y" ]; then
357 string 'Give default LIST parameter' DEFAULT_LIST 'T<10'
358 define_string DEFAULT_LIST_PARAM "$DEFAULT_LIST"
360 define_string DEFAULT_LIST "$DEFAULT_LIST"
361 define_bool DEFAULT_LIST_PARAM n
363 bool 'K: line comments treated as a file by default' COMMENT_IS_FILE y
364 bool 'Only nullify idle-time on PRIVMSG' IDLE_FROM_MSG y
367 mainmenu_option next_comment
368 comment 'Mandatory defines (you should leave these untouched)'
369 int 'Max auto connects per class (1!)' MAXIMUM_LINKS 1
370 echo '* Never define this on a production server:'
371 bool 'Enable message logging' MSGLOG_ENABLED
372 if [ "$MSGLOG_ENABLED" = "y" ]; then
373 int 'Message log size' MSGLOG_SIZE 128
375 if [ "$OPER_KILL" = "y" ]; then
376 bool 'Only allow KILLs of local clients' LOCAL_KILL_ONLY
378 define_bool LOCAL_KILL_ONLY $LOCAL_KILL_ONLY
380 int 'KILL nick chase time limit (30)' KILLCHASETIMELIMIT 30
381 int 'Max number of channels per user (recommended: 5)' MAXCHANNELSPERUSER 10
382 int 'Max number of silence masks (15!)' MAXSILES 15
383 int 'Expected average banmask length (40!)' AVBANLEN 40
384 eval define_macro MAXSILELENGTH \'\($AVBANLEN * MAXSILES\)\'
385 echo '* These are default values, used for class 0:'
386 int 'Max server idle time (60)' TIMESEC 60
387 int 'Class 0 ping frequency (120)' PINGFREQUENCY 120
388 int 'Class 0 connect frequency (600)' CONNECTFREQUENCY 600
389 int 'Min time before a link is good (300)' HANGONGOODLINK 300
390 int 'Wait before reconnecting to good link (10!)' HANGONRETRYDELAY 10
391 int 'connect(2) timeout (90!)' CONNECTTIMEOUT 90
392 int 'Max send queue (40000)' DEFAULTMAXSENDQLENGTH 40000