1 2000-12-05 Greg Sikorski <gte@atomicrevs.demon.co.uk>
2 * ircd/m_topic.c: Added missing braces that caused all remote
5 2000-12-04 Kevin L. Mitchell <klmitch@mit.edu>
7 * ircd/m_create.c: I'm tired of the exit_client warning :)
8 (ms_create): discovered that exit_client() was being called with
11 * ircd/s_misc.c (exit_client): remove all dependance on
12 FNAME_USERLOG, since that's now gone; log only to LS_USER
14 * ircd/s_debug.c: USE_SYSLOG no longer means anything
16 * ircd/m_oper.c (m_oper): no longer log to LS_OPERLOG--we already
19 * ircd/m_kill.c: no longer conditionalize on SYSLOG_KILL
21 * ircd/ircd_log.c: remove LS_OPERLOG, LS_USERLOG
23 * include/ircd_log.h: remove LS_OPERLOG, LS_USERLOG--they serve
24 the same purpose as LS_USER and LS_OPER
26 * config/config-sh.in: remove no longer relevant log config
29 * ircd/uping.c (uping_init): use log_write instead of ircd_log
31 * ircd/s_misc.c (exit_client): use log_write instead of ircd_log
33 * ircd/s_conf.c: use log_write instead of ircd_log
35 * ircd/s_bsd.c (report_error): use log_write instead of ircd_log
37 * ircd/s_auth.c (timeout_auth_queries): use log_write instead of
40 * ircd/res.c (send_res_msg): use log_write instead of ircd_log
42 * ircd/m_who.c: use log_write instead of write_log; no longer
43 conditionalize on WPATH; mark dead ircd_log calls
45 * ircd/m_uping.c: mark dead ircd_log call
47 * ircd/m_server.c (mr_server): use log_write instead of ircd_log
49 * ircd/m_restart.c: use log_write instead of ircd_log; mark dead
52 * ircd/m_rehash.c (mo_rehash): use log_write instead of ircd_log
54 * ircd/m_oper.c: use log_write instead of ircd_log; no longer
55 conditionalize on FNAME_OPERLOG; mark dead ircd_log calls
57 * ircd/m_kill.c: mark dead ircd_log calls
59 * ircd/m_connect.c: use log_write instead of ircd_log; mark dead
62 * ircd/m_clearmode.c: use log_write instead of write_log; no
63 longer conditionalize on OPATH
65 * ircd/jupe.c: use log_write instead of write_log; no longer
66 conditionalize on JPATH
68 * ircd/ircd_log.c: add USER subsystem; remove ircd_log() compat
69 function; fix a couple of bugs
71 * ircd/ircd_alloc.c: fixed a comment
73 * ircd/ircd.c: use log_write instead of ircd_log; fold server
74 notice generation in a couple of cases
76 * ircd/gline.c: use log_write instead of write_log; no longer
77 conditionalize on GPATH
79 * ircd/channel.c (modebuf_flush_int): use log_write instead of
80 write_log; no longer conditionalize on OPATH
82 * ircd/Makefile.in: run make depend, since dependencies have
85 * doc/example.conf: add system USER to documentation
87 * include/ircd_log.h: add system USER; remove old ircd_log()
90 2000-12-04 Isomer <isomer@coders.net>
91 * ircd/m_names.c: Add NAMES_EON to do_names to say add a
92 'end_of_names' reply when done.
93 * ircd/m_join.c: use NAMES_EON as mentioned above
95 2000-12-01 net <simms@LUCIDA.QC.CA>
97 * ircd/motd.c: add a freelist for struct Motds
99 2000-11-30 Kevin L. Mitchell <klmitch@mit.edu>
101 * ircd/s_stats.c (report_feature_list): report features--only
102 local opers can see logging configuration, since it doesn't really
103 mean anything to users
105 * ircd/s_err.c: add reply messages for new feature subsystem
107 * ircd/s_conf.c: add F lines to .conf
109 * ircd/parse.c: add the message descriptions for /set, /reset, and
112 * ircd/m_stats.c: add /stats f
114 * ircd/m_set.c (mo_set): implement /set
116 * ircd/m_reset.c (mo_reset): implement /reset
118 * ircd/m_rehash.c: /rehash m now flushes MOTD cache, and /rehash l
119 reopens log files (for log file rotation)
121 * ircd/m_get.c (mo_get): implement /get
123 * ircd/ircd_log.c: use int instead of void return value; add
124 log_report_features() and log_canon(); fix a function that
125 disappears if DEBUGMODE not #define'd
127 * ircd/ircd_features.c: functions to manipulate feature settings
128 either from the config file or with the new /set, /reset, and /get
131 * ircd/Makefile.in: add new .c files, run make depend
133 * include/s_stats.h: declare report_feature_list() (/stats f
136 * include/numeric.h: add RPL_STATSFLINE, RPL_FEATURE,
137 ERR_NOFEATURE, ERR_BADLOGTYPE, ERR_BADLOGSYS, and ERR_BADLOGVALUE
140 * include/msg.h: add defines for SET, RESET, and GET
142 * include/ircd_log.h: add a function to canonicalize subsystem
143 names; change some void return values to int
145 * include/ircd_features.h: new features subsystem handles all the
146 manipulation of special features, like log files
148 * include/handlers.h: declare new mo_{s,res,g}et message handlers
149 for fiddling with features run-time
151 * include/client.h (SNO_DEFAULT): don't set SNO_DEBUG by default;
152 seemed like a good idea at the time...
154 * doc/example.conf: document new F lines
156 2000-11-29 Kevin L. Mitchell <klmitch@mit.edu>
158 * ircd/s_debug.c: rewrite debug_init() and vdebug() in terms of
159 new logging functions, which have special support for the debug
160 log; added loop detection to vdebug(), so that I can
161 sendto_opmask_butone() from log_vwrite() without incurring another
164 * ircd/s_conf.c (rehash): call log_reopen() from rehash routine;
165 this allows log file rotations
167 * ircd/m_kill.c: call log_write_kill() instead of ircd_log_kill()
169 * ircd/ircd_log.c: much more work fleshing out the interface;
170 removed old interface; included backwards-compat ircd_log()
171 function that logs to subsystem LS_OLDLOG
173 * ircd/ircd.c: switch to new log_init()/log_close()/log_reopen()
176 * include/ircd_log.h: include stdarg.h for va_list; move ordering
177 warning to top of file; fill out LogSys enum; declare new
178 log_debug_init(), log_vwrite(), log_write_kill(), and
179 log_[sg]et_*() functions; add flags argument to log_write();
180 defined flags to inhibit various logging actions
182 * include/client.h: added support for new SNO_DEBUG, enabled only
183 if DEBUGMODE is defined
185 2000-11-28 Kevin L. Mitchell <klmitch@mit.edu>
187 * ircd/ircd_log.c: make sure the various LOG_* constants are
188 defined (probably not needed, since #include <syslog.h> isn't
189 conditional); various static data needed for the new logging
190 functions; definitions of new logging functions
192 * include/ircd_log.h: new LogSys enum, declarations for part of
195 * ircd/motd.c: we were setting type to MOTD_CLASS unconditionally,
196 which was of course stupid; switched to using switch/case in
197 initialization in motd_create(); zero the MotdList.other pointer
200 * ircd/ircd.c (main): motd_init() has to come before init_conf(),
201 or we overwrite init_conf()'s hard work with respect to T-lines
203 2000-11-27 Kevin L. Mitchell <klmitch@mit.edu>
205 * ircd/s_stats.c: comment out report_motd_list and include a
206 reference to motd_report()
208 * ircd/s_conf.c: rip out the old MOTD manipulation functions; call
209 motd_add() from the conf parser; call motd_clear() from the rehash
210 routine; remove the no longer needed memory clearing and reloading
211 stuff from the rehash service routine
213 * ircd/motd.c: loads new API, including static internal functions
214 to do allocation/deallocation, etc.
216 * ircd/m_stats.c: use new motd_report() instead of
219 * ircd/m_motd.c: use new syntax for motd_send()
221 * ircd/ircd.c: use new motd_init() function
223 * ircd/Makefile.in (SRC): forgot to add motd.c to SRC in
224 Makefile.(in); also ran make depend
226 * include/motd.h: don't need config.h, but now do need time.h;
227 define new structures and constants; redefine old API and define
230 2000-11-22 Kevin L. Mitchell <klmitch@mit.edu>
232 * ircd/s_user.c (register_user): use motd_signon() instead of
233 calling m_motd; much cleaner this way
235 * ircd/motd.c: write the new motd_* stuff to make MOTD handling
238 * ircd/m_motd.c: rewrite m{,s}_motd to call out to new motd_*
241 * include/motd.h: define new MOTD API stuff
243 2000-11-20 Kevin L. Mitchell <klmitch@mit.edu>
245 * ircd/ircd_reply.c (protocol_violation): rewrite
246 protocol_violation so it'll actually work
248 oh, yeah, use %s -> cptr->name, instead of %c -> cptr, so we get
249 the client's real name in there.
251 * ircd/m_motd.c (m_motd): Iso's addition of get_client_class(sptr)
252 resulted in core dumps if NODEFAULTMOTD is defined, because m_motd
253 gets called from register_user with a NULL sptr. This is probably
254 a design problem, but this bandaid will do for now...
256 2000-11-19 Isomer <isomer@coders.net>
257 * ircd/ircd_reply.c: added 'protocol_violation', thus alerting us
258 to problems in the server<->server protocol.
260 * ircd/m_connect.c: allow remote connects with a port of '0'
261 meaning to use the port in the config file.
263 * ircd/m_create.c: Enable hacking protection, lets see how far we
266 * ircd/m_error.c: The RFC says never accept ERROR from unreg'd
267 clients, so we don't any more.
269 * ircd/m_kill.c: The kill path is now made up of numnicks of servers,
270 and the user@host is displayed of the victim.
272 * ircd/m_map.c: reloaded 'dump_map'.
274 * ircd/m_trace.c: allow per class T:
276 * ircd/m_stats.c: allow local opers /remote stats anywhere on the 'net.
278 2000-11-17 Isomer <isomer@coders.net>
280 * ircd/m_topic.c: Fixed bug where we'd only send to clients topics
281 that were the *same* instead of different. Oh the embarrasment!
283 * ircd/IPcheck.c: Merged net's fix.
285 2000-11-02 Kevin L. Mitchell <klmitch@mit.edu>
287 * ircd/m_whois.c: remove compiler warning by adding a newline to
290 * ircd/m_names.c: moved the flags up to s_user.h
292 * ircd/m_join.c: call do_names instead of m_names; restructure
293 ms_join to never transmute a JOIN into a CREATE, but use the TS in
294 the JOIN (if present) to timestamp the channel
296 * ircd/channel.c: send JOINs individually, instead of grouping
297 them, so that we can send the channel's creation time
299 * include/s_user.h: declare do_names()
301 2000-10-30 Isomer <isomer@coders.net>
302 * ircd/m_oper.c: Fixed warning
304 2000-10-30 Isomer <isomer@coders.net>
305 * ircd/m_oper.c: Fixed over agressive cut and no paste
307 2000-10-30 Isomer <isomer@coders.net>
309 * ircd/m_topic.c: Restructured, fixed bug where topics on local
310 channels are propergated (I forget who pointed this out to me, but
311 thanks anyway). Also to save bandwidth don't send the topic to
312 users if the topic is already the same on the server (but still
313 propergate to other servers). X/W's "autotopic" feature must
314 chew a lot of bandwidth, hopefully this will help reduce this.
316 * doc/rfc1459.rfc: Updated documentation on /topic.
318 * ircd/listener.c: snotice warnings about failed accept()'s
319 potentially warning admins that they're running out of fd's.
321 * ircd/stats.c, ircd/class.c: Removed /stats v, added number of
322 people in a class in /stats y
324 * ircd/m_create.c: Checks for timewarp hacking and squit's
325 evil servers. (currently disabled)
328 2000-10-30 net <simms@lucida.qc.ca>
330 * ircd/gline.c: Fixed various bugs Isomer left behind.
332 2000-10-26 Kevin L. Mitchell <klmitch@mit.edu>
334 * ircd/m_join.c (m_join): reply on attempt to join a BADCHANed
335 channel is now ERR_BANNEDFROMCHAN instead of ERR_BADCHANNAME
337 2000-10-24 Kevin L. Mitchell <klmitch@mit.edu>
339 * ircd/channel.c: ok, now last mode rules; mode +ps will always
340 result in +s (and won't send a mode if the channel is already +s);
341 mode +sp will always result in +p; -n+n on a +n channel results in
342 no mode change; -n+n on a -n channel results in a +n mode change;
345 2000-10-23 Kevin L. Mitchell <klmitch@mit.edu>
347 * ircd/channel.c: add "add" and "del" elements to ParseState to
348 avoid not-too-pretty -p+s when +s is sufficient; fix a bug in
349 mode_parse_limit that caused it to clear all channel modes
350 prematurely; restructure mode_parse_mode to avoid calling
351 modebuf_mode too early (ties in with first mentioned change);
352 better logic for +p/+s mutual exclusivity; initialize "add" and
353 "del" elements in mode_parse; send simple modes down to
354 modebuf_mode after the loop in mode_parse
356 2000-09-28 Greg Sikorski <gte@atomicrevs.demon.co.uk>
357 * ircd/m_names.c: Fixed a non-lethal logic error that
358 triggers an assert() in find_member_link while debugging.
359 (Spotted by Maniac-).
360 2000-09-19 Thomas Helvey <helveytw@home.com>
361 * ircd/s_conf.c: move K:lines to their own list and data
362 structures, add supporting code.
363 * ircd/m_stats.c: cleanup stats processing a bit move
364 kline listing code to a new function, haven't figured
365 out where it goes yet tho'
366 * ircd/s_stats.c: added K:line bulk lister
367 * include/s_conf.h: added new DenyConf struct
368 * *[ch]: fixeup code that depended on changes
370 2000-09-17 Thomas Helvey <helveytw@home.com>
371 * ircd/class.c: encapsulate class list
372 * include/class.h: clean up classes
373 * * fixup code that depended on changes
375 2000-09-17 Thomas Helvey <helveytw@home.com>
376 * ircd/s_conf.c: add me to local conf
377 * include/s_conf.h: move CONF_ME macro to chkconf.c
378 * ircd/s_bsd.c: cleanup initialization, allow virtual host
379 to be changed by rehash
381 2000-09-17 Thomas Helvey <helveytw@home.com>
382 * include/class.h: add missing prototype
383 * ircd/class.c: make argument to get_conf_class const
385 2000-09-17 Thomas Helvey <helveytw@home.com>
386 * ircd/*.c: merged in changes from 2.10.10.pl12, cleanup
388 * ircd/*.h: merged in changes from 2.10.10.pl12, cleanup
391 2000-09-16 Thomas Helvey <helveytw@home.com>
392 * ircd/s_conf.c: add code for server struct
393 * ircd/client.c: copy of class.c sort of, new file for client
394 specific operations, will move things here as appropriate,
395 currently only one function is exported from here.
396 * ircd/*.c: general logic cleanups, convert negatives to
399 2000-09-16 Thomas Helvey <helveytw@home.com>
400 * ircd/s_conf.c: add code for new crule data structs, strip quotes
401 * ircd/crule.c: clean up scary casting a bit, type safety stuff
402 * include/s_conf.h: add CRuleConf struct and support, remove
404 * include/crule.h: type safety cleanups
405 * ircd/*.c: fixup code that depended on stuff I changed
407 2000-09-15 Thomas Helvey <helveytw@home.com>
408 * ircd/s_conf.c: start adding code for new conf data structs, changed
409 listeners, admin line, motd lines, class lines. Move validate_hostent
410 to resolver. General mayhem.
411 * include/s_conf.h: new data structs and accessors
412 * ircd/res.c: move validate_hostent here, rewrite, use regular
413 expression for validation.
414 * doc/example.conf: update docs for port
416 2000-09-14 Thomas Helvey <helveytw@home.com>
417 * ircd/s_conf.c (conf_init): rewrite conf file parser, start to break
418 up conf_init into managable chunks.
419 * ircd/listener.c (set_listener_mask): fix logic bug core dump.
420 * include/s_conf.h: add new data struct for local info (unwinding the mess).
422 2000-09-13 Thomas Helvey <helveytw@home.com>
423 * ircd/list.c: put Clients in free lists, pre-allocate MAXCONNECTIONS
425 * ircd/list.c: put SLinks in free lists
426 * ircd/channel.c: put Memberships in free lists
427 * ircd/ircd.c: rearrange initializations a bit in main
428 Note: With these changes, ircd NEVER frees Clients, SLinks or
429 Memberships. It will also rarely need to allocate new
430 ones during net bursts and other disruptions. This should
431 cut down on memory fragmentation a bit as well.
433 2000-08-30 Kevin L. Mitchell <klmitch@mit.edu>
435 * ircd/m_names.c (do_names): pull-up from do_names fix in
438 2000-07-15 Perry Lorier <Isomer@coders.net>
439 * various: IP only k:'s and G:'s now do bit tests instead of two(!)
440 match()'s. Major Major cpu savings. Also speed up the
441 other case slightly. As a side effect you can now
442 k/Gline *@10.0.0.0/8. I'll do bans tomorrow, it's nearing
445 2000-07-15 Perry Lorier <Isomer@coders.net>
446 * various: Fixed warnings after compiling on an alpha.
447 2000-07-09 Perry Lorier <Isomer@coders.net>
448 * doc/ircd.8: Applied grammitical changes by Liandrin, applied
449 changes suggested by various other people.
450 * ircd/IPcheck.c: More bug fixes. Current problem appears to be
451 that it gets a corrupt entry somehow.
452 2000-07-09 Greg Sikorski <gte@atomicrevs.demon.co.uk>
453 * ircd/m_oper.c: Clean up compiler warning.
455 2000-07-08 Perry Lorier <Isomer@coders.net>
456 * doc/ircd.8: Updated the documentation, it was slightly out of date
457 being updated around 1989.
458 * ircd/m_whois.c: Rewrote for clarity, and probably a bit more speed.
459 fixed a few minor glitches.
460 * doc/rfc1459.unet: Updated.
461 * ircd/IPcheck.c: Fixed more bugs.
462 * ircd/s_bsd.c: We now keep track of servers we've conected.
464 2000-07-02 Perry Lorier <Isomer@coders.net>
465 * ircd/s_misc.c: Fixed remote IPcheck bug. Ok, I'm a moron, so sue
466 me. Thanks to Hektik, thanks thanks thanks thanks
467 thanks thanks thanks thanks thank thanks thank thanks
469 2000-07-01 Perry Lorier <Isomer@coders.net>
470 * ircd/s_conf.c: "Fixed" the "bug" where people would "evade" K:'s.
471 * ircd/s_conf.c, include/IPcheck.h: Fixed compile warnings.
473 2000-06-22 Perry Lorier <Isomer@coders.net>
474 * ircd/IPcheck.c: Large chunks redone.
475 * ircd/s_conf.c: Changes due to IPcheck - ONE nolonger supported,
476 single AND double digit limits are allowed now.
477 * misc other: Changes to IPcheck.
479 2000-06-30 Perry Lorier <Isomer@coders.net>
480 * ircd/ircd.c: Fix command line parameter bugs.
482 2000-06-30 Perry Lorier <Isomer@coders.net>
483 * ircd/m_kill.c: Fixed bug with LOCAL_KILL_ONLY
484 * ircd/m_nick.c: Tidied things up.
486 2000-06-12 Joseph Bongaarts <foxxe@trms.com>
487 * ircd/m_stats.c: Iso forgot mo_stats when he added /stats v
489 2000-05-29 Perry Lorier <Isomer@coders.net>
490 * ircd/m_stats.c: add /stats v to do only the last part of the /trace
491 * ircd/IPcheck.c: Cosmetic change, if we meddle with it enough do
492 you think it'll get bored and fix itself?
494 2000-06-09 Greg Sikorski <gte@atomicrevs.demon.co.uk>
496 * ircd/m_names.c: Clean up compiler warnings.
498 2000-06-09 Kevin L. Mitchell <klmitch@mit.edu>
500 * ircd/channel.c (mode_parse_client): don't send warning if
501 there's not enough arguments for a +/-o/v; means the habit of
502 doing "/mode #channel +oooooo bob" doesn't result in a bunch of
505 2000-06-04 Greg Sikorski <gte@atomicrevs.demon.co.uk>
507 * ircd/m_names.c: Re-factor code to remove unneccessary
508 GlobalChannelList iteration every time someone joins a channel.
510 2000-06-02 Kevin L. Mitchell <klmitch@mit.edu>
512 * ircd/s_user.c: add struct Gline * argument to register_user;
513 look up global glines and repropagate them if necessary; send
514 acknowledgement of gline to remote servers when registering users
516 * ircd/s_serv.c (server_estab): don't send acknowledgement of
517 local glines to remote servers; do send gline acknowledgement of
520 * ircd/m_user.c (m_user): pass new struct Gline * argument to
523 * ircd/m_pong.c: pass new struct Gline * argument to register_user
525 * ircd/m_nick.c (ms_nick): document protocol change
527 * ircd/gline.c: support GLINE_LASTMOD
529 * include/s_user.h: add struct Gline * argument to register_user
531 * include/gline.h: add GLINE_LASTMOD to look up non-zero lastmods
533 * ircd/s_conf.c (find_kill): add unsigned int argument to
536 * ircd/gline.c: add GLINE_GLOBAL to lookup or find only global
537 glines; add unsigned int argument to gline_lookup()
539 * include/gline.h: add GLINE_GLOBAL flag; add unsigned int
540 argument to gline_lookup()
542 * ircd/m_server.c: Resend jupe only when there is no %<lastmod>
543 parameter, or when it falls out of bounds: see comments prior to
544 call to jupe_resend(); call server_estab with struct Jupe
545 parameter, so that we place the appropriate %<lastmod> in the
548 * ircd/s_serv.c (server_estab): send %<lastmod> for introduced
549 server, as well as for servers when we're sending the BURST
551 * include/s_serv.h: add a struct Jupe * to the arguments for
552 server_estab() so that we can send the appropriate lastmod
555 * ircd/m_gline.c (ms_gline): actually, this should be the
556 slightest bit more efficient...
558 * ircd/m_jupe.c (ms_jupe): actually, this should be the slightest
559 bit more efficient...
561 * ircd/m_gline.c (ms_gline): inhibit GLINE processing resends
564 * ircd/m_jupe.c (ms_jupe): inhibit JUPE processing resends during
567 * ircd/channel.c (joinbuf_join): really remove user from local
570 2000-05-29 Perry Lorier <Isomer@coders.net>
571 * ircd/m_names.c: Removed redundant space.
572 * ircd/s_bsd.c: Fixed incorrect syntax on ERROR line.
574 2000-05-18 Kevin L. Mitchell <klmitch@mit.edu>
576 * ircd/m_burst.c (ms_burst): er...that should have been a ",", not
579 2000-05-04 Kevin L. Mitchell <klmitch@mit.edu>
581 * ircd/channel.c: replace bogus assertions with returns, which is
582 logically correct; only wipe out limit/key if they were originally
583 set in the first place; remove user from channel when doing a
584 PARTALL; only send MODE +o for user CREATEing channel if user is
585 not MyUser--CREATE will only be used if the channel did not
586 originally exist, therefore we can assume no one local is on the
587 channel anyway, and we don't exactly need for the user to see an
588 explicit +o for themselves
590 * doc/readme.gline: describe the syntax of the GLINE command
592 * doc/readme.jupe: update to reflect a couple of changes to JUPE
594 * ircd/gline.c: don't propagate local changes
596 * ircd/jupe.c: don't propagate local changes
598 * ircd/m_gline.c (mo_gline): force local flag when deactivating
599 glines with 0 lastmod
601 * ircd/gline.c (gline_deactivate): G-lines with zero lastmod time
602 are now removed instead of being deactivated
604 * ircd/m_gline.c (ms_gline): make G-lines of the form "GLINE *
607 * ircd/channel.c (send_channel_modes): deal with one of the last
610 * ircd/m_burst.c (ms_burst): debugged ban processing; removed
613 * ircd/channel.c (modebuf_extract): remove debugging
614 sendto_opmask_butone calls
616 2000-05-03 Kevin L. Mitchell <klmitch@mit.edu>
618 * ircd/channel.c: support a couple of new flags to support using
619 mode_parse; fix some bugs with 0 struct ModeBuf *; implementation
620 of modebuf_extract to extract added flags for use by ms_burst
622 * include/channel.h: a couple of new flags to support using
623 mode_parse inside ms_burst
625 * ircd/m_burst.c (ms_burst): brand new implementation of BURST
627 * ircd/m_endburst.c: add loop to processing of end_of_burst to
628 free empty channels after the BURST is over.
630 * ircd/m_server.c: convert to use new send.c functions--I wanted
631 to rewrite it from scratch, but the logic's pretty complex; I may
632 still rewrite it, though...
634 2000-05-02 Thomas Helvey <tomh@inxpress.net>
636 * ircd/ircd.c: fix broken header include ordering
638 2000-05-02 Thomas Helvey <tomh@inxpress.net>
640 * ircd/IPcheck.c: cleanups for ZenShadow's cleanups
641 review emailed privately
643 * include/IPcheck.h: removed unneeded include
645 2000-05-02 Kevin L. Mitchell <klmitch@mit.edu>
647 * ircd/s_user.c (hunt_server): throw in a comment so I know what
648 the sendto_one is for
650 * include/querycmds.h (Count_unknownbecomesclient): convert to
653 * ircd/send.c: start removing dead code
655 * include/send.h: start removing dead code
657 * ircd/m_rping.c: convert to sendcmdto_one / send_reply /
660 * ircd/m_rpong.c: convert to sendcmdto_one / send_reply
662 2000-05-01 Kevin L. Mitchell <klmitch@mit.edu>
664 * ircd/m_stats.c: convert to sendcmdto_one / send_reply
666 * ircd/m_kick.c: Completely reimplement m_kick
668 * ircd/channel.c: send_user_joins removed; it was dead code,
671 2000-05-01 Perry Lorier <isomer@coders.net>
672 * ircd/m_invite.c: Fix for the rest of m_invite.c, and again.
673 * ircd/channels.c: My fix for the part problem. Untested, probably
674 won't work. Can't be much worse than the current problem.
675 it'll either work or core, take your pick.
678 2000-04-30 Perry Lorier <isomer@coders.net>
679 * config/config-sh.in: Fix for CONNEXIT
680 * ircd/s_{user,misc}.c: Fix for CONNEXIT
681 * ircd/m_invite.c: Fix for incorrectly numnickified invite.
682 (Kev: Want to come talk to me about this?)
684 2000-04-30 Steven M. Doyle <steven@doyle.net>
686 - general cleanups and readability enhancements
687 - rewrite of setuid/chroot code.
688 - server will no longer run as root
689 - -DPROFIL compile option removed
690 - Fixed IPcheck API calls
692 * config/config-sh.in
693 - Fixed up chroot compile options
694 - Added options for debug and profile compiles
696 * config/gen.ircd.Makefile
697 - Support for new debug/profile options
700 - Support for new debug/profile options
706 - Removed old API prototypes, added new ones
709 - Readability cleanups (well, I -think-...)
710 - Changed IPRegistryEntry.last_connect to a time_t. The previously
711 used unsigned short was probably causing interesting things after
712 a client had been connected longer than about 65,535 seconds...
713 - Removed old API functions.
716 - Removed IPcheck.h include
718 * Additionally modified IPcheck API calls in:
728 2000-04-30 Perry Lorier <isomer@coders.net>
729 * ircd/s_bsd.c: Sigh. :)
730 * ircd/m_mode.c: fix for modeless channels by poptix.
732 2000-04-29 Kevin L. Mitchell <klmitch@mit.edu>
734 * ircd/m_join.c: reimplement JOIN in terms of struct JoinBuf
736 * ircd/channel.c (clean_channelname): make clean_channelname also
737 truncate long channel names
739 2000-04-28 Kevin L. Mitchell <klmitch@mit.edu>
741 * ircd/m_create.c: reimplement CREATE in terms of struct JoinBuf
743 * ircd/channel.c: implemented joinbuf_init, joinbuf_join,
746 * include/channel.h: definitions and declarations for the struct
749 2000-04-29 Perry Lorier <isomer@coders.net>
750 * ircd/s_bsd.c: Ok, so I thought I compiled and tested this...
752 2000-04-29 Perry Lorier <isomer@coders.net>
753 * ircd/s_bsd.c: Add debugging code to IPcheck
755 2000-04-28 Kevin L. Mitchell <klmitch@mit.edu>
757 * include/ircd_reply.h (SND_EXPLICIT): use instead of RPL_EXPLICIT
759 * ircd/ircd_reply.c (send_reply): use SND_EXPLICIT instead of
762 * ircd/m_userhost.c (m_userhost): add a dead code comment
764 * ircd/m_desynch.c: forgot one...
766 * ircd/m_rehash.c (mo_rehash): er, duplicates :)
768 * ircd/m_proto.c (proto_send_supported): just change a comment so
769 it doesn't show up in my scans
771 * ircd/ircd_reply.c (send_reply): fix a slight bug...
773 * ircd/s_numeric.c (do_numeric): use new sendcmdto_* functions,
776 * ircd/parse.c (parse_server): argument wrangling to make
777 processing in do_numeric a little easier to deal with
779 * ircd/s_serv.c (server_estab): SERVER should come from
780 acptr->serv->up, not &me
782 * ircd/m_lusers.c: accidentally left out sptr for a %C
784 * ircd/send.c: hack to support doing wallchops...
786 * ircd/m_whowas.c: convert to new send functions
788 * ircd/m_whois.c: convert to new send functions
790 * ircd/m_who.c: convert to new send functions
792 * ircd/m_wallops.c: convert to new send functions
794 * ircd/m_wallchops.c: convert to new send functions
796 * ircd/m_version.c: convert to new send functions
798 * ircd/m_userip.c: convert to new send functions
800 * ircd/m_userhost.c: convert to new send functions
802 * ircd/m_uping.c: convert to new send functions
804 * ircd/m_trace.c: convert to new send functions
806 * ircd/m_topic.c: convert to new send functions
808 * ircd/m_time.c: convert to new send functions
810 * ircd/m_squit.c: convert to new send functions
812 * ircd/m_silence.c: convert to new send functions
814 * ircd/m_settime.c: convert to new send functions
816 * ircd/m_restart.c: convert to new send functions
818 * ircd/m_rehash.c: convert to new send functions
820 * ircd/m_privmsg.c: convert to new send functions
822 * ircd/m_pong.c: convert to new send functions
824 * ircd/m_ping.c: convert to new send functions
826 * ircd/m_pass.c: convert to new send functions
828 * ircd/m_opmode.c: convert to new send functions
830 * ircd/m_oper.c: convert to new send functions
832 * ircd/m_notice.c: convert to new send functions
834 * ircd/m_nick.c: convert to new send functions
836 * ircd/m_names.c: convert to new send functions
838 * ircd/m_motd.c: convert to new send functions
840 * ircd/m_mode.c: convert to new send functions
842 * ircd/m_map.c: convert to new send functions
844 * ircd/m_lusers.c: convert to new send functions
846 * ircd/m_list.c: convert to new send functions
848 * ircd/m_links.c: convert to new send functions
850 * ircd/m_kill.c: convert to new send functions
852 * ircd/m_jupe.c: convert to new send functions
854 * ircd/m_invite.c: convert to new send functions
856 * ircd/m_info.c: convert to new send functions
858 * ircd/m_help.c: convert to new send functions
860 * ircd/m_gline.c: convert to new send functions
862 * ircd/m_error.c: convert to new send functions
864 * ircd/m_endburst.c: convert to new send functions
866 * ircd/m_die.c: convert to new send functions
868 * ircd/m_destruct.c: convert to new send functions
870 * ircd/m_defaults.c: convert to new send functions
872 * ircd/m_connect.c: convert to new send functions
874 2000-04-28 Perry Lorier <isomer@coders.net>
875 * RELEASE.NOTES: Describe a few more undocumented features.
876 * config/config-sh.in: change the default paths for logging
877 and the recommended number of channels.
878 * include/supported.h: Rearrange slightly, added CHANTYPE's
880 2000-04-27 Kevin L. Mitchell <klmitch@mit.edu>
882 * ircd/m_close.c: convert to send_reply
884 * ircd/m_clearmode.c: convert to send_reply, sendcmdto_serv_butone
886 * ircd/m_away.c: convert to send_reply and sendcmdto_serv_butone
888 * ircd/m_admin.c: convert to send_reply and hunt_server_cmd
890 * ircd/s_user.c (hunt_server_cmd): new hunt_server replacement
891 that takes cmd and tok arguments, etc. NOTE: THIS IMPLEMENTATION
892 HAS A MAJOR HACK!!! The whole hunt_server architecture should be
893 carefully rethought...
895 * ircd/s_stats.c (hunt_stats): use new hunt_server_cmd
897 * include/s_user.h: hunt_server_cmd -- replacement for hunt_server
899 * ircd/s_misc.c: *sigh* 2.10.10 doesn't support squitting by
900 numeric nick; therefore, we have to use the server name
902 * ircd/m_squit.c (ms_squit): allow to squit by server numeric nick
904 * ircd/send.c: fix minor bugs
906 * ircd/s_user.c (check_target_limit): mark dead code so I filter
909 * ircd/s_serv.c (exit_new_server): mark dead code so I filter it
912 * ircd/parse.c: mark dead code so I filter it when I grep
914 * ircd/map.c: mark dead code so I filter it when I grep
916 * ircd/ircd.c: mark dead code so I filter it when I grep
918 * ircd/ircd_relay.c: convert over to new sendcmdto_*, send_reply
921 * ircd/channel.c: mark dead code so I filter it when I grep
923 * ircd/s_stats.c: use send_reply instead of sendto_one w/rpl_str;
924 hope I'm not stepping on toes...
926 * ircd/s_conf.c: more sendto_opmask_butone / send_reply
927 conversions; use ircd_snprintf in a couple of cases to negate the
928 possibility of buffer overflow
930 2000-04-26 Kevin L. Mitchell <klmitch@mit.edu>
932 * ircd/channel.c: convert as much as possible to new send
935 * ircd/send.c (sendcmdto_common_channels): fix a subtle bug --
936 test member->user->from->fd, not from->fd
938 * ircd/gline.c (gline_add): go ahead and add badchans; we just
939 won't look for them in m_gline; this way, they always work...
941 * ircd/jupe.c: use ircd_vsnprintf conversion specifiers
943 * ircd/gline.c: since write_log now uses ircd_vsnprintf, use
944 ircd_vsnprintf conversion specifiers
946 * ircd/support.c (write_log): use ircd_vsnprintf for write_log, so
947 I have my conversion specifiers
949 * ircd/gline.c (do_gline): use send_reply for ERR_YOUREBANNEDCREEP
951 * ircd/send.c (sendcmdto_flag_butone): explicitly send WALLOPS to
954 * ircd/s_serv.c (exit_new_server): rewrite exit_new_server to be a
955 little less brain-dead
957 * ircd/s_misc.c: use sendcmdto_one, sendrawto_one, and send_reply
959 * ircd/s_debug.c: use send_reply with RPL_EXPLICIT for
962 * ircd/res.c (cres_mem): use send_reply with RPL_EXPLICIT for
965 * ircd/list.c (send_listinfo): use send_reply with RPL_EXPLICIT
968 * ircd/m_pong.c: use RPL_EXPLICIT for ERR_BADPING
970 * ircd/ircd.c: use RPL_EXPLICIT for ERR_BADPING
972 * ircd/s_user.c (register_user): use RPL_EXPLICIT for
975 * ircd/ircd_reply.c (send_reply): support RPL_EXPLICIT
977 * include/ircd_reply.h (RPL_EXPLICIT): somewhat of a hack to mark
978 a numeric as needing to use an explicit pattern, which will be the
979 first argument in the variable argument list
981 * ircd/s_user.c: use sendrawto_one instead of sendto_one to send
982 non-prefixed nospoof PING
984 * ircd/s_bsd.c: use sendrawto_one instead of sendto_one to send
985 non-prefixed SERVER login
987 * ircd/ircd.c (check_pings): fix last sendto_one calls (except for
988 a numeric usage further up)
990 * include/send.h: declare sendrawto_one
992 * ircd/send.c (sendrawto_one): new function to use ONLY for
993 non-prefixed commands, like PING to client, or PASS/SERVER on
996 2000-04-25 Kevin L. Mitchell <klmitch@mit.edu>
998 * ircd/ircd_snprintf.c (doprintf): implement %H for possible
999 future expansion (channel numerics?)
1001 * include/ircd_snprintf.h: added documentation to # to explain use
1002 with %C; added documentation for : to explain use with %C; added
1003 documentation for %H for channels
1005 * ircd/whocmds.c: use send_reply
1007 * ircd/userload.c: use sendcmdto_one
1009 * ircd/uping.c: use sendcmdto_one
1011 * ircd/send.c: use new flags to %C format string; ':' prefixes
1012 client name with a colon for local connects, '#' uses
1013 nick!user@host form for local connects
1015 * ircd/s_user.c: use send_reply, sendto_opmask_butone,
1016 sendcmdto_one, sendcmdto_serv_butone, sendcmdto_flag_butone
1018 * ircd/s_serv.c: use sendcmdto_one, sendto_opmask_butone
1020 * ircd/s_bsd.c: use sendto_opmask_butone, send_reply,
1023 * ircd/s_auth.c: use sendto_opmask_butone
1025 * ircd/res.c: use sendcmdto_one
1027 * ircd/ircd_snprintf.c (doprintf): minor bug fixes and some
1028 debugging assertions
1030 2000-04-24 Kevin L. Mitchell <klmitch@mit.edu>
1032 * ircd/support.c: dumpcore is no longer used, so get rid of it
1034 * ircd/parse.c: use send_reply, sendcmdto_one
1036 * ircd/map.c: use send_reply
1038 * ircd/listener.c: use send_reply
1040 * ircd/jupe.c: use sendto_opmask_butone, send_reply
1042 * ircd/ircd_reply.c: use send_reply
1044 * ircd/ircd.c: use sendto_opmask_butone
1046 * ircd/gline.c: use sendto_opmask_butone, send_reply
1048 * ircd/ircd_snprintf.c (doprintf): make it deal with incompletely
1049 registered clients; make FLAG_ALT print nick!user@host; make
1050 FLAG_COLON print :blah
1052 * ircd/class.c (report_classes): use send_reply instead of
1055 * ircd/hash.c (m_hash): replace sendto_one with sendcmdto_one
1057 * ircd/IPcheck.c (ip_registry_connect_succeeded): replace
1058 sendto_one with sendcmdto_one
1060 2000-04-21 Kevin L. Mitchell <klmitch@mit.edu>
1062 * ircd/send.c: clean up logic in sendcmdto_channel_butone; use
1063 MyConnect() instead of IsServer() in sendcmdto_flag_butone; define
1064 sendcmdto_match_butone
1066 * include/send.h: declare sendcmdto_match_butone
1068 2000-04-20 Kevin L. Mitchell <klmitch@mit.edu>
1070 * ircd/jupe.c: update to use send_reply()
1072 * ircd/gline.c: update to use send_reply()
1074 * include/ircd_reply.h: declare send_reply
1076 * ircd/ircd_reply.c (send_reply): send_error_to_client, but for
1077 replies; uses ircd_snprintf
1079 * ircd/send.c: added comments to redirect searchers to appropriate
1080 sendcmdto_* function; moved new functions to end of file; added
1081 explanatory comments; reordered arguments; defined new functions
1084 * ircd/m_jupe.c: reorder arguments to sendcmdto_* functions
1086 * ircd/m_gline.c: reorder arguments to sendcmdto_* functions
1088 * ircd/jupe.c: reorder arguments to sendcmdto_* functions
1090 * ircd/gline.c: reorder arguments to sendcmdto_* functions
1092 * include/send.h: reorder arguments, add explanatory comments,
1093 declare new functions sendcmdto_flag_butone, sendto_opmask_butone,
1094 and vsendto_opmask_butone
1096 2000-04-19 Kevin L. Mitchell <klmitch@mit.edu>
1098 * ircd/send.c: define sendcmdto_channel_butone, wrote a simplified
1099 vsendto_op_mask that uses '*' instead of the receiving client
1102 * include/send.h: declare sendcmdto_channel_butone; takes a skip
1103 argument that allows you to skip (or not to skip) deaf users,
1104 users behind bursting servers, and non channel operators
1106 2000-04-17 Kevin L. Mitchell <klmitch@mit.edu>
1108 * ircd/send.c: new sendcmdto_channel_butserv -- note that old
1109 sendto_channel_butserv has a subtle bug; also wrote
1110 sendcmdto_common_channels.
1112 * include/send.h: declare new sendcmdto_* functions
1114 * ircd/jupe.c: support local deactivations of jupes
1116 * ircd/gline.c: support local deactivations of glines
1118 * include/jupe.h: JUPE_LDEACT allows jupes to be locally
1119 deactivated; if they aren't locally deactivated, then it slaves to
1120 the net-wide activation status; JupeIsRemActive() tests only
1121 whether the jupe is active everywhere else
1123 * include/gline.h: GLINE_LDEACT allows glines to be locally
1124 deactivated; if they aren't locally deactivated, then it slaves to
1125 the net-wide activation status; GlineIsRemActive() tests only
1126 whether the gline is active everywhere else
1128 * ircd/gline.c: detect overlapping G-lines; if an existing, wider
1129 gline expires after the new one will, we drop the new one,
1130 otherwise we add the G-line after that one (so the wide one will
1131 apply first); if the new one contains an existing G-line and if it
1132 will expire after the existing one, we drop the existing one to
1135 * ircd/m_gline.c (mo_gline): opers could issue remote local
1136 glines when CONFIG_OPERCMDS was off; fixed
1138 2000-04-16 Kevin L. Mitchell <klmitch@mit.edu>
1140 * ircd/m_jupe.c (mo_jupe): allow target argument to be dropped if
1141 this is a local JUPE
1143 * ircd/gline.c: add flags argument to gline_activate and
1144 gline_deactivate for future expansion
1146 * ircd/m_gline.c: pass flags to gline_activate and
1149 * include/gline.h: add flags argument to gline_activate and
1152 * ircd/jupe.c: add flags argument to jupe_activate and
1153 jupe_deactivate for future expansion
1155 * include/jupe.h: add flags argument to jupe_activate and
1158 * ircd/m_jupe.c: pass a flags argument to jupe_add instead of
1159 local, active; pass flags to jupe_activate and jupe_deactivate
1161 * include/gline.h: remove dead code
1163 * ircd/gline.c: make gline expire times relative to CurrentTime,
1164 since that should be monotonically increasing, instead of
1165 TStime(), which can be set backwards, and which can therefore
1166 cause an expire time to increase; make local glines be removed
1167 instead of just deactivated; don't let gline_find() look for
1168 user@host glines if the mask being looked up is a channel mask
1170 * ircd/send.c (vsendcmdto_one): forgot to account for the case
1171 where origin is a server and destination is a user
1173 * ircd/jupe.c: make jupe expire times relative to CurrentTime,
1174 since that should be monotonically increasing, instead of
1175 TStime(), which can be set backwards, and which can therefore
1176 cause an expire time to increase; make local jupes be removed
1177 instead of just deactivated
1179 * ircd/ircd_snprintf.c: d'oh, thanks for catching that; short for
1180 limit is fine. any other warnings I should know about?
1182 2000-04-15 Thomas Helvey <tomh@inxpress.net>
1184 * ircd/*.c: const correctness and type safety cleanups to
1185 get code to compile with C++ compiler. Still has
1186 signed/unsigned comparison warnings.
1188 2000-04-15 Greg Sikorski <gte@atomicrevs.demon.co.uk>
1190 * ircd/userload.c: change <sys/time.h> include to <time.h> for
1193 2000-04-14 Kevin L. Mitchell <klmitch@mit.edu>
1195 * ircd/m_gline.c (mo_gline): d'oh, target isn't a numeric; use %C
1196 and convert acptr...
1198 * ircd/s_user.c: move gline_lookup function call into
1199 register_user, where it'll have a username to lookup!
1201 * ircd/m_gline.c: modify to utilize new sendcmdto_* series of
1202 functions; also stuff send_error_to_client into return clauses
1204 * ircd/m_jupe.c: modify to utilize new sendcmdto_* series of
1205 functions; also use send_error_to_client where that makes sense
1207 * ircd/jupe.c: modify to utilize new sendcmdto_* series of
1208 functions; also use send_error_to_client where that makes sense
1210 * ircd/gline.c: modify to utilize new sendcmdto_* series of
1211 functions; also fix gline_lookup() to deal properly with remote
1212 clients--boy, do struct Client and struct User need to be cleaned
1215 * ircd/ircd_snprintf.c (doprintf): a dest of &me is a server,
1218 * ircd/send.c: wrote sendcmdto_one(), vsendcmdto_one(), and
1219 sendcmdto_serv_butone(), all utilizing the %v conversion of
1222 * include/send.h: define IRC_BUFSIZE, max size of a message;
1223 declare sendcmdto_one(), vsendcmdto_one(), and
1224 sendcmdto_serv_butone()
1226 * include/msg.h: define all the CMD_* constants needed to utilize
1227 the new sendcmdto_* series of functions
1229 * ircd/Makefile.in (SRC): list ircd_snprintf.c; run make depend
1231 * ircd/gline.c: remove old, dead code.
1233 * ircd/m_gline.c (mo_gline): disallow setting of global G-lines
1234 unless CONFIG_OPERCMDS is enabled; disallow listing of all G-lines
1235 (don't advertise proxies); remove dead code
1237 * ircd/parse.c: oper handler for JUPE only lists jupes unless
1238 CONFIG_OPERCMDS is enabled
1240 * ircd/m_jupe.c (mo_jupe): don't compile mo_jupe() if
1241 CONFIG_OPERCMDS is not enabled; we'll disable it in parse.c
1243 * ircd/m_opmode.c (mo_opmode): if CONFIG_OPERCMDS is not enabled,
1244 always return ERR_DISABLED
1246 * ircd/m_clearmode.c (mo_clearmode): if CONFIG_OPERCMDS is not
1247 enabled, always return ERR_DISABLED
1249 * ircd/s_err.c: add error message to indicate disabled commands
1251 * include/numeric.h (ERR_DISABLED): to indicate disabled commands
1253 * doc/Configure.help: add documentation for CONFIG_OPERCMDS
1255 * config/config-sh.in: add CONFIG_OPERCMDS, default both it and
1256 CONFIG_NEW_MODE to 'y' for now
1258 * ircd/gline.c (gline_list): fix a minor formatting bogon
1260 * BUGS: since I fixed that bug, might as well mark it fixed.
1262 * ircd/m_join.c: look up badchans with GLINE_EXACT
1264 * ircd/m_gline.c: fix parc count problems; look up existing
1265 G-lines with GLINE_EXACT; only set new lastmod when
1266 activating/deactivating existing glines if old lastmod was not 0
1268 * ircd/gline.c: forgot to copy the gline reason over; don't
1269 propagate a gline with 0 lastmod if origin is user; add
1270 GLINE_EXACT to force exact matching of gline mask
1272 * ircd/ircd_snprintf.c (doprintf): forgot to deal with the zero
1275 * ircd/s_conf.c (find_kill): gline_find() takes a char *userhost,
1276 but gline_lookup() actually takes a client--d'oh.
1278 2000-04-13 Thomas Helvey <tomh@inxpress.net>
1279 * ircd/IPcheck.c: Back port BLMet's bugfix from 2.10.10
1281 2000-04-13 Greg Sikorski <gte@atomicrevs.demon.co.uk>
1283 * ircd/whocmds.c: Don't make idle flag default in /who, to prevent:
1285 "Gte3 H*iwg Gte@212.49.240.217 :1 :0 I am the one that was."
1288 * ircd/whocmds.c: Change idle time calc from socket idle to user
1291 2000-04-13 Kevin L. Mitchell <klmitch@mit.edu>
1293 * config/aclocal.m4 (unet_CHECK_TYPE_SIZES): check size of void *,
1294 too, for ircd_snprintf.c
1296 * include/ircd_snprintf.h: documentation for ircd_(v)snprintf, in
1297 comments; mostly descended from the Linux manpage for printf, but
1298 also documenting the extensions.
1300 * ircd/ircd_snprintf.c: NULL dest is equivalent to going to a
1301 client; make 'q' be the same as 'L'; remove __inline__; only
1302 define EXTENSION if HAVE_LONG_LONG is defined
1304 * include/handlers.h: declare m_gline()
1306 * ircd/parse.c: gline can be called by users, but it only lists
1309 * ircd/s_user.c (set_nick_name): resend gline if a remote server
1310 introduces a glined client
1312 * ircd/s_serv.c (server_estab): burst glines, too
1314 * ircd/gline.c: fix up all the expire times to be offsets;
1315 simplify gline_resend()
1317 * ircd/m_gline.c: begin coding replacements for ms_gline(),
1318 mo_gline(), and m_gline()
1320 * ircd/gline.c (gline_add): allow *@#channel to work correctly;
1321 also, prohibit local BADCHANs if LOCAL_BADCHAN not defined
1323 2000-04-13 Greg Sikorski <gte@atomicrevs.demon.co.uk>
1325 * tools/Bouncer/*: Add comments/documentation/tags.
1326 * tools/Bouncer/*: Add debug defines, make task fork().
1328 2000-04-12 Thomas Helvey <tomh@inxpress.net>
1329 * ircd/s_err.c: Cleanup s_err.c make one table so we
1330 don't have to do anything tricky to get an error string.
1332 2000-04-12 Greg Sikorski <gte@atomicrevs.demon.co.uk>
1333 * Add port bouncer for http (x/w)
1335 2000-04-12 Kevin L. Mitchell <klmitch@mit.edu>
1337 * ircd/s_conf.c (find_kill): replaced call to find_gline() with a
1338 call to gline_find(); also used GlineReason() instead of direct
1339 reference to structure member
1341 * ircd/m_join.c (m_join): replace bad_channel() calls with calls
1342 to gline_find(name, GLINE_BADCHAN), and also check to see if gline
1345 * ircd/channel.c: nothing seems to be called anywhere...
1347 * ircd/s_err.c: update a couple of replies to dovetail with new
1350 * ircd/gline.c: begin complete re-implementation of gline.c along
1351 the lines of the final design of jupe.c
1353 * include/gline.h: begin complete re-implementation of gline.c
1354 along the lines of the final design of jupe.c
1356 * ircd/channel.c (mode_process_clients): fix "Deop of +k user on
1357 %s by %s" message...
1359 * ircd/ircd_snprintf.c: my new snprintf()-like functions
1361 * include/ircd_snprintf.h: my new snprintf()-like functions
1363 2000-04-11 Thomas Helvey <tomh@inxpress.net>
1364 * ircd/IPcheck.c: removed old dead code
1365 * ircd/s_user.c (send_user_info): removed non-standard
1366 user not found message for userhost/userip
1368 2000-04-11 Greg Sikorski <gte@atomicrevs.demon.co.uk>
1370 * ircd/s_err.c: Added missing quotes to ERR_DONTCHEAT numeric.
1371 * doc/p10.html: Work on chapter 4.
1373 2000-04-10 Kevin L. Mitchell <klmitch@mit.edu>
1375 * ircd/channel.c (mode_parse_client): fix coredump on /mode
1376 #foobar +o nosuchnick
1378 2000-04-10 Perry Lorier <Isomer@coders.net>
1381 2000-04-09 Thomas Helvey <tomh@inxpress.net>
1382 * include/IPcheck.h: fix prototype
1383 * ircd/s_user.c: fix usage of IPcheck_remote_connect
1384 * ircd/IPcheck.c: removed unused args
1386 2000-04-09 Thomas Helvey <tomh@inxpress.net>
1387 * include/IPcheck.h: add proto for IPcheck_expire
1389 * ircd/IPcheck.c: Rewrote
1391 * ircd/ircd.c: Add IPcheck_expire to main message loop
1393 * ircd/s_user.c: Redo target hashing, refactor target code
1395 * include/numeric.h: Cleaned up numerics, added which ones are
1396 in use by other networks and what they are in use for.
1398 * ircd/channel.c: cleaned can_join(), allow anyone through anything
1399 if /invited, simplified the function. Opers overusing OPEROVERRIDE
1400 will get a message explaining to them not to cheat.
1402 * ircd/m_join.c: cleaned up the various join functions, should be
1403 a lot more efficient. Still needs work. Now assumes that s<->s
1404 won't send it a JOIN 0. Service coders - note this and tread with
1407 * ircd/m_stats.c: added Gte-'s stats doc patch.
1409 * ircd/m_version.c: /version now returns the 005 numeric as well.
1410 as requested by Liandrin.
1413 2000-04-07 Kevin L. Mitchell <klmitch@mit.edu>
1415 * ircd/m_clearmode.c: add include for support.h for write_log()
1417 * configure: move ircd/crypt/* to tools/*
1419 2000-04-06 Thomas Helvey <tomh@inxpress.net>
1420 * ircd/s_auth.c: Shorten auth connect timeout to 60 seconds
1421 set client host to server alias if connection from localhost
1423 2000-04-06 Perry Lorier <isomer@coders.net>
1424 * ircd/ircd.c: Fix core during pinging (oops)
1426 2000-04-06 Perry Lorier <isomer@coders.net>
1427 * ircd/send.c: fixed wrong ident being sent to channels bug.
1428 * include/numerics.h: Updated some of the numerics from other
1429 networks. Flagged some as 'unused' by undernet.
1431 2000-03-30 Perry Lorier <isomer@coders.net>
1432 * ircd/ircd.c: Lets see if this helps the ping problem at all.
1433 * ircd/whocmds.c, /doc/readme.who: Added %l specifier to get idle
1434 time for local clients. (as requested), extended who now returns all
1435 the flags (@+!) so you can tell the complete state of a client.
1437 2000-03-30 Thomas Helvey <tomh@inxpress.net>
1438 * m_rping.c m_rpong.c: add Gte's rping/rpong fixes
1440 2000-03-30 Perry Lorier <isomer@coders.net>
1441 * ircd/parse.c: oops, missed opers.
1443 2000-03-30 Perry Lorier <isomer@coders.net>
1444 * ircd/parse.c: fixed mystifying ping bug thats been plaguing us
1445 for so long. Remember: m_ping MUST be in the parse array. :)
1447 2000-03-30 Perry Lorier <isomer@coders.net>
1448 * ircd/ircd.c: test in check_pings was wrong. I move that we
1449 disallow cvs commit after 10pm localtime....
1451 2000-03-30 Perry Lorier <isomer@coders.net>
1452 * ircd/m_pong.c: Fix it for servers too.
1454 2000-03-30 Perry Lorier <isomer@coders.net>
1455 * ircd/m_pong.c: Fix ping timeout bugs
1457 2000-03-30 Perry Lorier <isomer@coders.net>
1458 * ircd/channel.c: Bans had CurrentTime in their when field instead
1461 2000-03-31 Thomas Helvey <tomh@ixpress.net>
1462 * ircd/numnicks.c (SetXYYCapacity): fix for extended
1465 2000-03-30 Perry Lorier <isomer@coders.net>
1466 * ircd/m_nick.c: send kills both ways so when we add nick change
1467 on collision we don't desync the network.
1469 * ircd/map.c: Fixup the map a bit more.
1471 2000-03-31 Kevin L. Mitchell <klmitch@mit.edu>
1473 * ircd/m_clearmode.c (do_clearmode): Log the CLEARMODE to OPATH
1475 * ircd/m_opmode.c: Log the mode changes to OPATH
1477 * ircd/channel.c (modebuf_flush_int): Log the mode changes to
1480 * include/channel.h (MODEBUF_DEST_LOG): Log the mode changes to
1483 * doc/Configure.help: help text for CONFIG_LOG_OPMODE / OPATH
1485 * config/config-sh.in: added OPATH for opmode log file
1487 * ircd/m_clearmode.c (do_clearmode): updated uses of
1488 modebuf_mode_string() for the new usage
1490 * ircd/channel.c: added flag MODE_FREE and an int argument to
1491 modebuf_mode_string() to indicate that the string must be free'd;
1492 updated calls to modebuf_mode_string() for the new usage; called
1493 collapse(pretty_mask()) on the ban string and use allocated memory
1494 for it; added ban list length accounting; fixed a number of small
1495 bugs in ban processing
1497 * include/channel.h: added flag MODE_FREE and an int argument to
1498 modebuf_mode_string() to indicate that the string must be free'd
1500 * ircd/m_clearmode.c (do_clearmode): made sure clearmode removed
1501 keys and limits that are set
1503 2000-03-30 Perry Lorier <isomer@coders.net>
1504 * ircd/ircd.c: rewrote check_pings() for maintainability
1505 and speed. Also changed quit msg's so they don't have
1506 redundant nick[host] info in them.
1508 * ircd/send.c: Changed write errors to report what error
1509 occured (if possible).
1511 * ircd/gline.c: added gline comment to the quit.
1513 * ircd/m_server.c: Added suggestions to server quits mentioning
1514 what went wrong so the admin can fix it earlier instead of asking
1517 * ircd/map.c: Changed m_map() to hide numerics, show a * beside
1518 servers that aren't fully burst yet. And show '(--s)' for servers
1521 * doc/example.conf: Fixed wrapped U:
1523 2000-03-30 Kevin L. Mitchell <klmitch@mit.edu>
1525 * ircd/m_mode.c (ms_mode): implemented a new m_mode in terms of
1526 mode_parse() (version selectable at compile time)
1528 * ircd/m_clearmode.c (mo_clearmode): clean_channelname(parv[1])
1530 * ircd/m_opmode.c (mo_opmode): clean_channelname(parv[1])
1532 * config/config-sh.in: add new config option to enable new m_mode
1535 * doc/Configure.help: add documentation for new config option
1538 * ircd/channel.c (mode_parse_client): /opmode #foobar -o -- 461
1539 MODE -v : Not enough parameters
1541 * ircd/m_clearmode.c (do_clearmode): do_clearmode() would remove
1542 +k and +l even if they weren't set...
1544 * ircd/m_opmode.c: implement the OPMODE command using mode_parse()
1546 * ircd/channel.c: make mode_process_clients() clear the DEOPPED
1547 flag; fix +s+p exclusivity; add MODE_ADD/MODE_DEL to flag list
1548 for; test the 0-th member, not the i-th member, of the client
1551 * ircd/m_clearmode.c (do_clearmode): use the new
1552 mode_invite_clear() function
1554 * ircd/channel.c: cleared up all the compile-time warnings and
1557 * include/channel.h: added declarations for mode_ban_invalidate()
1558 and mode_invite_clear()
1560 * ircd/channel.c: finished mode_parse(), then broke it up into a
1561 dozen or so helper functions to make the code easier to read
1563 2000-03-29 Thomas Helvey <tomh@inxpress.net>
1564 * ircd/ircd.c: refactor server initialization a bit, use
1565 getopt for parsing command line, refactor init_sys, main,
1568 * ircd/s_bsd.c: add functions for initialization to clean
1569 up logic a bit and remove duplicated code.
1571 * include/ircd.h: add struct for server process related
1574 2000-03-29 Kevin L. Mitchell <klmitch@mit.edu>
1576 * ircd/channel.c: initial definition of mode_parse(); flags to
1577 prevent doing the same thing multiple times; helper method
1578 send_notoper() to send a "Not oper"/"Not on channel" notice
1580 * include/channel.h: declare mode_parse() and helper flags
1582 * ircd/channel.c (modebuf_flush_int): fiddled with timestamp
1583 sending to match the current action of set_mode() closely enough
1584 that hopefully there won't be major conflicts
1586 * ircd/channel.c (modebuf_flush_int): consolidated the mode string
1587 building logic, reversed the order of the arguments to mode
1588 commands to have '-' preceed '+'
1590 2000-03-29 Thomas Helvey <tomh@inxpress.net>
1591 * ircd/s_bsd.c (add_connection): don't disable socket options
1592 let OS tune itself and allow important performance tweaks to
1595 2000-03-28 Kevin L. Mitchell <klmitch@mit.edu>
1597 * ircd/channel.c (modebuf_flush_int): use %d, not %-15d; I got
1598 confused by set_mode, which is doing some really weird logic;
1599 guess what I'm going to rewrite next? ;)
1601 2000-03-28 Kevin L. Mitchell <klmitch@emc.com>
1603 * include/channel.h: added MODE_SAVE for the bounds checking stuff
1606 * ircd/channel.c: make modebuf_flush into modebuf_flush_int and
1607 make it do bounds checking on the buffer; all modes are sent only
1608 if the all parameter is 1; modebuf_flush is the exported wrapper
1610 * include/channel.h: add BOUNCE, renumber flags to get a little
1613 * ircd/channel.c (modebuf_flush): don't overload HACK2, add
1614 BOUNCE; send DESYNCH message
1616 2000-03-27 Kevin L. Mitchell <klmitch@emc.com>
1618 * ircd/m_clearmode.c (do_clearmode): only mark the modes the
1619 channel actually has in effect for deletion
1621 * ircd/channel.c: added explanatory comments to all added
1622 functions; made flushing take place at the correct place even if
1623 the MODEBUF_DEST_DEOP flag is set; rewrote build_string() helper
1624 to bash some stupid bugs; made modebuf_flush() return if ModeBuf
1625 is empty, fixed the apparent source, removed some bogus string
1626 termination code, properly terminate the mode strings, add support
1627 for HACK2 and HACK3, made limit strings not be sent if the limit
1628 is being removed, changed where '+' and '-' come from in sent
1629 strings, added support for DEOP flag, set up bouncing code for
1632 * ircd/Makefile.in: ran make depend
1634 * include/channel.h: added new defines for future functionality,
1635 made modebuf_flush() return int so I can use tail recursion
1637 * ircd/m_clearmode.c: add msg.h to includes; other misc cleanups
1638 to make it all compile
1640 * ircd/m_opmode.c: add msg.h to includes...
1642 * ircd/m_clearmode.c: implemented mo_clearchan()/ms_clearchan()
1644 * ircd/channel.c (modebuf_flush): realized I forgot to
1645 nul-terminate addbuf/rembuf properly...
1647 * ircd/m_clearmode.c (do_clearmode): wrote do_clearmode()...
1649 * ircd/channel.c (modebuf_flush): correct sendto_server_butone to
1650 sendto_serv_butone--blah^2
1652 * ircd/send.c (sendto_serv_butone): stupid comments confused me
1654 * ircd/channel.c (modebuf_flush): if there are no mode changes to
1655 propagate, we're done...
1657 * ircd/channel.c (modebuf_flush): duh; it's sendto_server_butone,
1658 not sendto_all_butone
1660 * ircd/m_clearmode.c: define skeleton for m{o,s}_clearmode
1662 * ircd/m_opmode.c: define skeleton for m{o,s}_opmode
1664 * ircd/Makefile.in (SRC): added m_opmode() and m_clearmode() to
1667 * ircd/parse.c: added messages for opmode and clearmode
1669 * include/handlers.h: added declarations for mo_opmode(),
1670 ms_opmode(), mo_clearmode(), and ms_clearmode()
1672 * include/msg.h: define MSG_OPMODE, TOK_OPMODE, MSG_CLEARMODE, and
1675 * include/channel.h (MODEBUF_DEST_OPMODE): Define the
1676 MODEBUF_DEST_OPMODE flag
1678 * ircd/channel.c (modebuf_flush): added new flag,
1679 MODEBUF_DEST_OPMODE; causes channel MODE/HACK(4) notice to appear
1680 to originate from source's server (or source itself, if
1681 IsServer(source)); also causes a server-level MODE to be sent as
1684 * include/channel.h: defined MODEBUF_DEST_SERVER,
1687 * ircd/channel.c: Add another argument to build_string() to handle
1688 numeric nicks; implemented MODEBUF_DEST_SERVER to send MODEs to
1689 servers; implemented MODEBUF_DEST_HACK4 to cause HACK(4) notices
1692 2000-03-27 Perry Lorier <isomer@coders.net>
1694 * ircd/s_bsd.c: fixed missing 'u' typo.
1696 2000-03-26 Kevin L. Mitchell <klmitch@emc.com>
1698 * ircd/channel.c: implement modebuf_init(), _mode(), _mode_uint(),
1699 _mode_string(), _mode_client(), _flush(); also implemented a
1700 simple build_string()
1702 * include/channel.h: added definition of ModeBuf, modebuf_*
1703 manipulation functions, and a couple of helper macros
1705 2000-03-24 Thomas Helvey <tomh@inxpress.net>
1706 * numicks.c: convert extended numerics to use original mask version
1709 2000-03-23 Thomas Helvey <tomh@inxpress.net>
1710 * Merge in changes from production
1711 2000-03-22 Thomas Helvey <tomh@inxpress.net>
1712 * numicks.c: Tweak to numnick generator to reduce possibility of duplicates.
1713 * rfc1459.unet: Add Maniac's documentation for /names 0
1714 * Fix misc. jupe bugs that somehow made it into the tree
1715 * Escape /names 0 to mean /names --Maniac
1716 * Don't core when server asks for info --Maniac
1717 * Add Kev's jupe patch --Bleep
1718 * Add Maniacs squit patch --Bleep
1719 * Merge in u2_10_10_beta07 changes --Bleep
1720 * Merge in u2_10_10_beta06 changes --Bleep
1721 * Start ircu2.10.11 development, beta branch u2_10_10 --Bleep
1722 #-----------------------------------------------------------------------------